Development of collagen/nanohydroxyapatite scaffolds containing plant extract intended for bone regeneration

Aqueous extract of Ormocarpum cochinchinense augments proliferation and promotes osteogenesis in osteoblast like MG63 cells

Background

Bone tissue engineering requires a high restorative index as a demand from modern day requirements. Therapeutic agents derived from natural sources play a vital role as modulators in promoting bone regeneration. Ormocarpum cochinchinense, a shrub, is used by the traditional healers of southern East Asia to treat bone fractures. However, there remains a dearth in the exploration of its bone healing properties.

Methods

The present study reports a systematic analysis of the aqueous extract of Ormocarpum cochinchinense (OCE) as a repository of natural bio-actives capable of eliciting in vitro biomineralization and thereby osteogenesis. MTT assay, and Live/dead cell staining assay were used to evaluate the cell viability of MG-63 cells. Alizarin staining evaluated the mineralization by OCE, and ALP enzyme activity was measured both qualitatively and quantitatively. Gene expression of osteogenic markers (Runx2, ALP, Collagen type 1, BMP2, Osteocalcin, and Osteopontin) was measured by RT-qPCR.

Results

The MTT, and Live/Dead staining results exemplified significant proliferation index. Augmented biomineralization as early as 7 days was validated by Alizarin Red staining with increased mineralized nodules. The activity of Alkaline phosphatase (an early bone marker) was significantly enhanced by OCE. Furthermore, the expression levels of early and late osteogenic markers were increased profoundly after OCE treatment in a dose-dependent manner.

Conclusion

The present study demonstrates the potential of Ormocarpum cochinchinense to promote osteogenesis, exemplifying its potential for bone tissue engineering.

Efficacy of Three-Dimensional Bioactive Composites in Long Bone Repair with Photobiomodulation

Different treatments have been proposed for morphofunctional bone repair; however, they are not always efficient and have limitations. In this experimental study, we present matrix composites with a possible synergistic effect acting with scaffolds for bone growth and use of photobiomodulation (PBM) to accelerate this tissue repair. Thus, the objective was to evaluate the effect of PBM in the repair of a long bone (tibia) of rats filled with biomimetic collagen matrices with nanohydroxyapatite and heterologous fibrin biopolymer (FB). Forty-eight rats were distributed into eight groups (n = six each): Blood Clot (BC), Blood Clot + PBM (BCP), Matrix (M), Matrix + PBM (MP), Fibrin Biopolymer (FB), Fibrin Biopolymer + PBM (FBP), Matrix + FB (MFB), Matrix + FB + PBM (MFBP). A 2.0 mm bone defect was created in the proximal third of the left tibia. The BCP, MP, FBP, and MFBP groups underwent PBM during surgery and maintained twice a week until euthanasia at 42 days. Microcomputed tomography (micro-CT), histomorphological and histomorphometric analyses were performed. Micro-CT analysis revealed that PBM influenced cortical interposition between the remnant and newly formed bone. Histologically, no exacerbated inflammatory focus or foreign body-type granulomatous reaction was observed in any group; however, a vast collagenous matrix with a more oriented and thicker spatial conformation was observed in the PBM-treated groups. Histomorphometrically, the BCP, MP, and MFBP groups showed significantly higher values compared to the other groups. Specifically, the BC group presented a mean bone tissue density of 68.33 ± 7.394, while the BCP and MP groups showed 99.83 ± 11.87 and 99.67 ± 20.58, respectively (p < 0.05). Qualitative analysis of collagen fibers indicated enhanced organization and maturation in PBM-treated groups. This study concluded that the association of PBM in the repair of long bones in rats, filled with biomimetic collagen matrices with nanohydroxyapatite and fibrin biopolymer, presented results that contribute to the improvement of bone growth, together with the association of scaffolds.

Bioactivity and biomedical applications of pomegranate peel extract: a comprehensive review

Pomegranate peel is a by-product generated during the processing of pomegranate (Punica granatum L.) fruit, accounting for approximately 50% of the total mass of the fruit. Although pomegranate peel is usually regarded as waste, it is rich in various bioactive metabolites such as polyphenols, tannins, and flavonoids, demonstrating significant medicinal and nutritional value. In recent years, Pomegranate peel extract (PPE) has shown broad application prospects in the biomedical field due to its multiple effects, including antioxidant, anti-inflammatory, antibacterial, anti-apoptotic properties, and promotion of cell regeneration. This review consolidates the major bioactive metabolites of PPE and explores its applications in biomedical materials, including nanodrug carriers, hydrogels, and tissue engineering scaffolds. By synthesizing the existing literature, we delve into the potential value of PPE in biomedicine, the challenges currently encountered, and the future directions for research. The aim of this review is to provide a scientific basis for optimizing the utilization of PPE and to facilitate its broader application in the biomedical field.

Phloridzin functionalized gelatin-based scaffold for bone tissue engineering

Polyphenol-functionalized biomaterials are significant in the field of bone tissue engineering (BTE) due to their antioxidant, anti-inflammatory, and osteoinductive properties. In this study, a gelatin (Gel)-based scaffold was functionalized with phloridzin (Ph), the primary polyphenol in apple by-products, to investigate its influence on physicochemical and morphological, properties of the scaffold for BTE application. A preliminary assessment of the biological properties of the functionalized scaffold was also undertaken. The Ph-functionalized scaffold (Gel/Ph) exhibited a porous structure with high porosity (71.3 ± 0.3 %), a pore size of 206.5 ± 1.7 μm, and a radical scavenging activity exceeding 70 %. This scaffold with Young's modulus of 10.8 MPa was determined to support cell proliferation and exhibited cytocompatibility with mesenchymal stem cells (MSCs). Incorporating hydroxyapatite nanoparticle (HA) in the Gel/Ph scaffold stimulated the osteogenic differentiation of key osteogenic genes, including Runx2, ALPL, COL1A1, and OSX ultimately promoting mineralization. This research highlights the promising potential of utilizing polyphenolic compounds derived from fruit waste to functionalize scaffolds for BTE applications.

Jaboticaba Peel Extract Attenuates Ovariectomy-Induced Bone Loss by Preserving Osteoblast Activity

Therapies to prevent osteoporosis are relevant since it is one of the most common non-communicable human diseases in the world and the most prevalent bone disorder in adults. Since jaboticaba peel extract (JPE) added to the culture medium enhanced the osteogenic potential of mesenchymal stem cells (MSCs) derived from osteoporotic rats, we hypothesized that JPE prevents the development of ovariectomy-induced osteoporosis. Ovariectomized rats were treated with either JPE (30 mg/kg of body weight) or its vehicle for 90 days, starting 7 days after the ovariectomy. Then, the femurs were subjected to microcomputed tomography and histological analyses, and the osteoblast and adipocyte differentiation of MSCs was evaluated. JPE attenuated ovariectomy-induced bone loss, as evidenced by higher bone volume/total volume and trabecular number, along with lower trabecular separation and bone marrow adiposity. These protective effects of JPE on bone tissue are due to its ability to prevent the imbalance between osteoblast and adipocyte differentiation of MSCs, since, compared with MSCs derived from ovariectomized rats treated with vehicle, MSCs treated with JPE exhibited higher gene and protein expression of osteogenic markers and extracellular matrix mineralization, as well as lower gene expression of adipogenic markers. These data highlight the potential therapeutic use of JPE to prevent osteoporosis.

Use of Plant Extracts in Polymeric Scaffolds in the Regeneration of Mandibular Injuries

Severe loss of bone mass may require grafting, and, among the alternatives available, there are natural biomaterials that can act as scaffolds for the cell growth necessary for tissue regeneration. Collagen and elastin polymers are a good alternative due to their biomimetic properties of bone tissue, and their characteristics can be improved with the addition of polysaccharides such as chitosan and bioactive compounds such as jatoba resin and pomegranate extract due to their antigenic actions. The aim of this experimental protocol was to evaluate bone neoformation in experimentally made defects in the mandible of rats using polymeric scaffolds with plant extracts added. Thirty rats were divided into group 1, with a mandibular defect filled with a clot from the lesion and no graft implant (G1-C, n = 10); group 2, filled with collagen/chitosan/jatoba resin scaffolds (G2-CCJ, n = 10); and group 3, with collagen/nanohydroxyapatite/elastin/pomegranate extract scaffolds (G3-CHER, n = 10). Six weeks after surgery, the animals were euthanized and samples from the surgical areas were submitted to macroscopic, radiological, histological, and morphometric analysis of the mandibular lesion repair process. The results showed no inflammatory infiltrates in the surgical area, indicating good acceptance of the scaffolds in the microenvironment of the host area. In the control group (G1), there was a predominance of reactive connective tissue, while in the grafted groups (G2 and G3), there was bone formation from the margins of the lesion, but it was still insufficient for total bone repair of the defect within the experimental period standardized in this study. The histomorphometric analysis showed that the mean percentage of bone volume formed in the surgical area of groups G1, G2, and G3 was 17.17 ± 2.68, 27.45 ± 1.65, and 34.07 ± 0.64 (mean ± standard deviation), respectively. It can be concluded that these scaffolds with plant extracts added can be a viable alternative for bone repair, as they are easily manipulated, have a low production cost, and stimulate the formation of new bone by osteoconduction.

A double-layer cellulose/pectin-soy protein isolate-pomegranate peel extract micro/nanofiber dressing for acceleration of wound healing

Multi-layered wound dressings can closely mimic the hierarchical structure of the skin. Herein, a double-layer dressing material is fabricated through electrospinning, comprised of a nanofibrous structure as a healing-support layer or the bottom layer (BL) containing pectin (Pec), soy protein isolate (SPI), pomegranate peel extract (P), and a cellulose (Cel) microfiber layer as a protective/monitoring layer or top layer (TL). The formation of a fine bilayer structure was confirmed using scanning electron microscopy. Cel/Pec-SPI-P dressing showed a 60.05 % weight loss during 7 days of immersion in phosphate buffered solution. The ultimate tensile strength, elastic modulus, and elongation at break for different dressings were within the range of 3.14-3.57 MPa, 32.26-36.58 MPa, and 59.04-63.19 %, respectively. The release of SPI and phenolic compounds from dressings were measured and their antibacterial activity was evaluated. The fabricated dressing was non-cytotoxic following exposure to human keratinocyte cells. The Cel/Pec-SPI-P dressing exhibited excellent cell adhesion and migration as well as angiogenesis. More importantly, in vivo experiments on Cel/Pec-SPI-P dressings showed faster epidermal layer formation, blood vessel generation, collagen deposition, and a faster wound healing rate. Overall, it is anticipated that the Cel/Pec-SPI-P bilayer dressing facilitates wound treatment and can be a promising approach for clinical use.

Additive manufacturing of poly (lactic acid)/hydroxyapatite/carbon nanotubes biocomposites for fibroblast cell proliferation

Bone tissue is one of the most important in the human body. In this study, scaffolds of poly (lactic acid) PLA reinforced with hydroxyapatite (HA) and carbon nanotubes (CNT) were manufactured, evaluating their mechanical and biological properties. HA was synthesized by wet method and characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). The scaffolds were produced using additive manufacturing and characterized by optical microscopy, SEM, thermogravimetric analysis (TGA), Raman spectroscopy and biological tests. The SEM results showed that the PLA surface was affected by the incorporation of CNT. TG showed that the incorporation of HA into the polymer matrix compromised the thermal stability of PLA. On the other hand, the incorporation of CNT to the polymer and the impregnation with HA on the surface by thermal effect increased the stability of PLA/CNT scaffolds. Raman spectra indicated that HA impregnation on the surface did not modify the polymer or the ceramic. In the compression tests, PLA and PLA/CNT scaffolds displayed the best compressive strength. In the biological tests, more than 85% of the cells remained viable after 48 h of incubation with all tested scaffolds and groups with CNT in the composition disclosing the best results.

Viability of Collagen Matrix Grafts Associated with Nanohydroxyapatite and Elastin in Bone Repair in the Experimental Condition of Ovariectomy

Bone lesions have the capacity for regeneration under normal conditions of the bone metabolism process. However, due to the increasing incidence of major traumas and diseases that cause bone-mineral deficiency, such as osteoporosis, scaffolds are needed that can assist in the bone regeneration process. Currently, natural polymeric scaffolds and bioactive nanoparticles stand out. Therefore, the objective of the study was to evaluate the osteoregenerative potential in tibiae of healthy and ovariectomized rats using mineralized collagen and nanohydroxyapatite (nHA) scaffolds associated with elastin. The in-vivo experimental study was performed with 60 20-week-old Wistar rats, distributed into non-ovariectomized (NO) and ovariectomized (O) groups, as follows: Controls (G1-NO-C and G4-O-C); Collagen with nHA scaffold (G2-NO-MSH and G5-O-MSH); and Collagen with nHA and elastin scaffold (G3-NO-MSHC and G6-O-MSHC). The animals were euthanized 6 weeks after surgery and the samples were analyzed by macroscopy, radiology, and histomorphometry. ANOVA and Tukey tests were performed with a 95% CI and a significance index of p < 0.05. In the histological analyses, it was possible to observe new bone formed with an organized and compact morphology that was rich in osteocytes and with maturity characteristics. This is compatible with osteoconductivity in both matrices (MSH and MSHC) in rats with normal conditions of bone metabolism and with gonadal deficiency. Furthermore, they demonstrated superior osteogenic potential when compared to control groups. There was no significant difference in the rate of new bone formation between the scaffolds. Ovariectomy did not exacerbate the immune response but negatively influenced the bone-defect repair process.

Phytochemical Compounds Involved in the Bone Regeneration Process and Their Innovative Administration: A Systematic Review

Bone metabolism is a complex process which is influenced by the activity of bone cells (e.g., osteocytes, osteoblasts, osteoclasts); the effect of some specific biomarkers (e.g., parathyroid hormone, vitamin D, alkaline phosphatase, osteocalcin, osteopontin, osteoprotegerin, osterix, RANKL, Runx2); and the characteristic signaling pathways (e.g., RANKL/RANK, Wnt/β, Notch, BMP, SMAD). Some phytochemical compounds-such as flavonoids, tannins, polyphenols, anthocyanins, terpenoids, polysaccharides, alkaloids and others-presented a beneficial and stimulating effect in the bone regeneration process due to the pro-estrogenic activity, the antioxidant and the anti-inflammatory effect and modulation of bone signaling pathways. Lately, nanomedicine has emerged as an innovative concept for new treatments in bone-related pathologies envisaged through the incorporation of medicinal substances in nanometric systems for oral or local administration, as well as in nanostructured scaffolds with huge potential in bone tissue engineering.

Accelerating bone regeneration using poly(lactic-co-glycolic acid)/hydroxyapatite scaffolds containing duck feet-derived collagen

Collagen, with low antigenicity and excellent cell adhesion, is a biomaterial mainly used for regenerating bone, cartilage, and skin, owing to its biocompatibility and biodegradability. Results from a previous study confirmed that a scaffold mixed with duck feet-derived collagen (DC) and Poly(lactic-co-glycolic acid) (PLGA) reduced inflammatory reaction and increased bone regeneration. To develop an optimal bone substitute we included hydroxyapatite (HAp), a key osteoconductive material, in a DC and PLGA mixture. We fabricated 0, 10, 20, 40, 60, and 80 wt% DC/PLGA/HAp scaffolds and studied their potential for bone tissue engineering. Characteristic analysis of the scaffold and seeding of rabbit bone marrow mesenchymal stem cells (rBMSCs) on the scaffold were conducted to investigate cell proliferation, osteogenic differentiation, and bone formation. We confirmed that increasing DC concentration not only improved the compressive strength of the DC/PLGA/HAp scaffold but also cell proliferation and osteogenic differentiation. It was found through comparison with previous studies that including HAp in the scaffold also promotes osteogenic differentiation. Our study thus shows through in vivo results that the 80 wt% DC/PLGA/HAp scaffold promotes bone mineralization and collagen deposition while reducing the inflammatory response. Hence, 80 wt% DC/PLGA/HAp has excellent potential as a biomaterial for bone regeneration applications.

Notoginsenoside R1 Promotes Migration, Adhesin, Spreading, and Osteogenic Differentiation of Human Adipose Tissue-Derived Mesenchymal Stromal Cells

Cellular activities, such as attachment, spreading, proliferation, migration, and differentiation are indispensable for the success of bone tissue engineering. Mesenchymal stromal cells (MSCs) are the key precursor cells to regenerate bone. Bioactive compounds from natural products had shown bone regenerative potential. Notoginsenoside R1 (NGR1) is a primary bioactive natural compound that regulates various biological activities, including cardiovascular protection, neuro-protection, and anti-cancer effects. However, the effect of NGR1 on migration, adhesion, spreading, and osteogenic differentiation of MSCs required for bone tissue engineering application has not been tested properly. In this study, we aimed to analyze the effect of NGR1 on the cellular activities of MSCs. Since human adipose-derived stromal cells (hASCs) are commonly used MSCs for bone tissue engineering, we used hASCs as a model of MSCs. The optimal concentration of 0.05 μg/mL NGR1 was biocompatible and promoted migration and osteogenic differentiation of hASCs. Pro-angiogenic factor VEGF expression was upregulated in NGR1-treated hASCs. NGR1 enhanced the adhesion and spreading of hASCs on the bio-inert glass surface. NGR1 robustly promoted hASCs adhesion and survival in 3D-printed TCP scaffold both in vitro and in vivo. NGR1 mitigated LPS-induced expression of inflammatory markers IL-1β, IL-6, and TNF-α in hASCs as well as inhibited the RANKL/OPG expression ratio. In conclusion, the biocompatible NGR1 promoted the migration, adhesion, spreading, osteogenic differentiation, and anti-inflammatory properties of hASCs.

Biomimetic sponge using duck's feet derived collagen and hydroxyapatite to promote bone regeneration

Collagen, a natural biomaterial derived from animal tissues, has attracted the attention of biomedical material researchers because of its excellent cell affinity and low rejection in vivo. In this study, collagen was extracted using livestock by-product flippers, and an experiment was performed to assess its application as a scaffold for bone tissue implantation. For this purpose, we fabricated 2%, and 3% duck's feet derived collagen (DC) sponges. We then compared them to hydroxyapatite (HAp)-coated DC sponges, and measured the porosity and pore size using scanning electron microscopy (SEM) to analyze the physical properties and morphology of DC and DC/HAp sponges. 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay were carried out to measure the proliferation of bone marrow stem cells (BMSCs) in DC and DC/HAp sponges. An alkaline phosphatase activity assay confirmed the osteogenic differentiation ability of BMSCs. Polymerase chain reaction (PCR) was performed to confirm the BMSC-specific genetic marker. The osteogenic potential was confirmed by the bone formation in an in vivo environment on the scaffold by histological and immunohistochemical analysis. Overall, this study shows that DC/HAp sponges have biocompatibility and good physical properties. Additionally, DC/HAp sponges show potential use as bone graft materials for tissue engineering applications.

Fabrication method for a magnetically induced highly oriented nanohydroxyapatite/collagen composite

Both collagen fibres and nanohydroxyapatite crystals have anisotropic magnetisation, which allows them to be oriented by a high magnetic field. Highly oriented nanohydroxyapatite/collagen composites were prepared using a high magnetic field combined with in situ synthesis. These highly oriented composites were investigated and compared with conventional composites. The results showed that the collagen fibres in the magnetically induced highly oriented nanohydroxyapatite/collagen composites had a preferred orientation and smaller molecular spacing, while the nanohydroxyapatite crystals were tightly adhered along the collagen fibre surface. The magnetically induced composites exhibited superior resistance to swelling and degradation along with high compressive strength. This artificial composite, with a structure and composition similar to natural bone, represents a new idea for improving materials for vertical or horizontal bone augmentation.

A Naringin-loaded gelatin-microsphere/nano-hydroxyapatite/silk fibroin composite scaffold promoted healing of critical-size vertebral defects in ovariectomised rat

In this study, we investigated the effect of three-dimensional of naringin/gelatin microspheres/nano-hydroxyapatite/silk fibroin (NG/GMs/nHA/SF) scaffolds on repair of a critical-size bone defect of lumbar 6 in osteoporotic rats. In this work, a cell-free scaffold for bone-tissue engineering based on a silk fibroin (SF)/nano-hydroxyapatite (nHA) scaffold was developed. The scaffold was fabricated by lyophilization. Naringin (NG) was loaded into gelatin microspheres (GMs), which were encapsulated in the nHA/SF scaffolds. The materials were characterized using x ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy and thermogravimetric analysis. Moreover, the biomechanics, degradation, and drug-release profile of the scaffold were also evaluated. In vitro, the effect of the scaffold on the adhesion, proliferation, and osteogenic differentiation of rat bone marrow mesenchymal stem cells (BMSCs) was evaluated. In vivo, at 3 months after ovariectomy, a critical-size lumbar defect was indued in the rats to evaluate scaffold therapeutic potential. A 3-mm defect in L6 developed in 60 SD rats, which were randomly divided into SF scaffold, nHA/SF scaffold, NG/nHA/SF scaffold, NG/GMs/nHA/SF scaffold, and blank groups (n = 12 each). At 4, 8, 12, and 16 weeks postoperatively, osteogenesis was evaluated by X-ray, micro-computed tomography, hematoxylin-eosin staining, and fast green staining, and by analysis of BMP-2, Runx2, and Ocn protein levels at 16 weeks. In our results, NG/GM/nHA/SF scaffolds exhibited good biocompatibility, biomechanical strength, and promoted BMSC adhesion, proliferation, and calcium nodule formation in vitro. Moreover, NG/GMs/nHA/SF scaffolds showed greater osteogenic differentiation potential than the other scaffolds in vitro. In vivo, gradual new bone formation was observed, and bone defects recovered by 16 weeks in the experimental group. In the blank group, limited bone formation was observed, and the bone defect was obvious. In conclusion, NG/GMs/nHA/SF scaffolds promoted repair of a lumbar 6 defect in osteoporotic rats. Therefore, the NG/GMs/nHA/SF biocomposite scaffold has potential as a bone-defect-filling biomaterial for bone regeneration.