Curauá-derived carbon dots: Fluorescent probes for effective Fe(III) ion detection, cellular labeling and bioimaging

N-Doping CQDs as an Efficient Fluorescence Probe Based on Dynamic Quenching for Determination of Copper Ions and Alcohol Sensing in Baijiu

To address an accurate detection of heavy metal ions in Baijiu production, a nitrogen-doping carbon quantum dots (N-CQDs) was prepared by hydrothermal method from citric acid and urea. The as-prepared N-CQDs had an average particle size of 2.74 nm, and a large number of functional groups (amino, carbonyl group, etc.) attached on its surface, which obtained a 9.6% of quantum yield (QY) with relatively high and stable fluorescence performance. As a fluorescent sensor, the fluorescence of N-CQDs at 380 nm excitation wavelength could be quenched quantitatively by adding Cu2+, due to the dynamic quenching of electron transfer caused by the binding of amine groups and Cu2+, which showed excellent sensitivity and selectivity to Cu2+ in the range of 0.5-5 μM with a detection limit (LOD) of 0.032 μM. In addition, the N-CQDs as well as could be applied to quantitative determine alcohol content in the range of 10-80 V/V% depending on the fluorescence enhancement. Upon the experiment, the fluorescent mechanism was studied by Molecular dynamics (MD) simulations, which demonstrated that solvent effect played an influential role on sensing alcohol content in Baijiu. Overall, the work provided a theoretically guide for the design of fluorescence sensors to monitor heavy metal ion in liquid drinks and sense alcohol content.

Applications of Functionalized Carbon-Based Quantum Dots in Fluorescence Sensing of Iron(III)

Iron, an essential trace element exhibits detrimental effects on human health when present at higher or lower concentration than the required. Therefore, there is a pressing demand for sensitive and selective detection of Fe3+ in water, food etc. Unfortunately, in several instances, the traditional approaches suffer from a number of shortcomings like complicated procedures, limited sensitivity, poor selectivity and more expensive and time consuming. The scope of optical tuning and excellent photophysical properties of carbon- based nanomaterials like carbon dots (C-dots) and graphene dots (g-dots) have made them promising optical sensors of metal ions. Moreover, high surface area, superior stability of such materials contributes towards the fruitful development of sensors. The present review offered critical information on the fabrication and fluorimetric applications of these functional nanomaterials for sensitive and selective detection of Fe3+. An in-depth discussion on fluorescent C-dots made from naturally occurring materials and chemical techniques were presented. Effect of doping in C-dots was also highlighted in terms of improved fluorescence response and selectivity. In a similar approach g-dots were also discussed. Many of these sensors exhibited great selectivity, superior sensitivity, high quantum yield, robust chemical and photochemical stability and real-time applicability. Further improvement in these factors can be targeted to develop new sensors.

Fluorescent Sensing of Fe3+ in Acidic Environment by Carbon Dots Derived From Empty Fruit Bunch Biochar: Central Composite Design Optimization

A rapid, eco-friendly, and selective monitoring of Fe(III) in real media utilizing carbon dots (CDs) as a luminescence detector has been reported. CDs were fabricated by a hydrothermal route from empty fruit bunch biochar. The as-synthesized CDs were analyzed using various analytical tools. The results reveal that CDs have spherical shapes with a narrow particle size distribution and are enriched with multiple active sites, which impart excellent hydrophilicity and photostability. The CDs displayed bright blue emission under UV light with emission/excitation maxima at 452/350 nm, respectively, and a QY of 7.54%. The CDs exhibited high resistance to photobleaching and high salt conditions and pose a long lifetime of up to 6 months with no agglomeration. The detection variables, including pH, temperature, and CDs concentration, were optimized via response surface methodology. The statistical data verified the precision of the quadratic model for predicting the sensing performance of the nanoprobe. Under optimal environments, a linear range from 0 to 50 μM and a detection limit of 0.17 μM was obtained. The turn-off process includes the strong coordination between Fe(III) and electron-donating oxygen species on the edge of CDs. The rapid luminescence recognition using acid-free materials renders CDs a promising option for water treatment.

Biomass-derived multiatom-doped carbon dots for water sensing based on excited state intraparticle proton transfer in organic solvents

The presence of trace water impurities in organic solvents can significantly influence chemical reactions and product quality; thus, the accurate detection of water content in these solvents is a critical requirement for industrial applications. Accordingly, an eco-friendly, effective, and economical sensor for detecting trace quantities of miscible water in organic solvents is required for industrial applications. In this study, we synthesized biomass-derived multi-atom-doped carbon dots (MACDs) as fluorescent probes and employed them for the detection of trace amounts of water impurities in several water-miscible organic solvents. The MACDs exhibited stable dual-color fluorescence emission under ultraviolet light irradiation and red and blue emissions in organic solvents and water. The fluorescence quantum yield was approximately 11 %, which indicates an excited intraparticle proton transfer response due to an increase in the water content within a wide response range from 0 % to 100 % (v/v) in organic solvents. The intensity of the red emission signal at 670 nm gradually decreased with an increase in the water content in the organic solvent. The MACDs could detect water with an instant response time of 55 s, a high sensitivity, and low limits of detection of 0.08 %, 1.36 %, 0.03 %, 0.04 %, 0.12 %, and 0.05 % (v/v) in ethanol, acetonitrile, dimethylformamide, methanol, isopropanol, and tetrahydrofuran, respectively. Hence, biomass-derived MACDs can serve as efficient and eco-friendly water sensors in organic solvents.

Effective Determination of Diosmin Using Nitrogen Doped Carbon Dots as Probe Based on Internal Filtering Effect

The establishment of a convenient and efficient testing method is crucial and needed for the monitoring of diosmin. In this study, nitrogen doped carbon dots (N-CDs) with the particle size distribution of 2.5-5.7 nm and the average diameter of 4.1 nm were successfully synthesized using a simple strategy. N-CDs exhibited excellent and stable fluorescence performance with the quantum yield of 22.33%. Correspondingly, a fluorescence analytical method was developed for diosmin determination using N-CDs as probe. UV-vis absorbance spectroscopy and the evaluation of internal filtering parameters verified that the mechanism causing the quenching of N-CDs was an internal filtering effect (IFE). The concentration of diosmin can be directly evaluated based on the quenched fluorescence intensities. After optimizing experimental conditions, it was found that the fluorescence quenching efficiency ((F0-F)/F0) of N-CDs exhibited a good linear relationship with the concentration of diosmin (CDiosmin) in the range of 3.0-50 µg/mL. The limit of detection (LOD) was 0.86 µg/mL based on 3σ/slope (n = 13). This method was successfully applied to accurately determine the content of diosmin in diosmin tablets and human plasma samples with good reproducibility. It stands out for its simplicity, speed, and acceptable determination performance.

Sustainable synthesis of lignin-derived carbon dots with visible pH response for Fe3+ detection and bioimaging

Synthesis of lignin-based carbon dots (LCDs) with high quantum yield (QY), stable fluorescence properties and biocompatibility has been a challenge. Here, we propose an improved two-step strategy for producing high-quality LCDs from enzymatic hydrolysis lignin (EHL). The p-aminobenzenesulfonic acid used in the strategy not only provides nitrogen and sulfur elements, but also tailors the disordered three-dimensional structure of EHL. The successful co-doping of N and S elements favors the reduction of the optical energy bandgap (Eg), resulting in a high QY of 45.05% for LCDs. The LCDs exhibited superior selectivity and sensitivity for Fe3+ with a limit of detection (LOD) of 0.15 μM when Fe3+ concentration was 50-500 μM. In addition, LCDs demonstrated significant fluorescence in HepG2 cells and HepG2 cells loaded with LCDs at a concentration of 80 μg/mL showed good viability, suggesting that they are suitable for in vivo applications. The luminescent centers of LCDs change during pH regulation and thus show a special visual response to pH changes, making them have great potential for detecting metabolism in living cells. This work provides a novel and low-cost method for fabricating sustainable fluorescent probes for chemical sensing and bioimaging.

Low Cu(II) Concentration Detection Based on Fluorescent Detector Made from Citric Acid and Urea

Carbon quantum dots (CQD) are an advanced fluorescent material, which has attracted more and more attention in theoretical research and practical applications. To obtain stable CQDs with high fluorescence characteristics for detecting trace metal ions in water, nitrogen-doped carbon quantum dots (N-CQDs) based fluorescent sensors were synthesized by the hydrothermal method, using citric acid and urea as source. Transmission electron microscopy (TEM) images showed that the synthesized N-CQDs maintained a narrow particle size distribution bellow 10 nm, and its average size was 3.07 nm. Fourier transform infrared spectroscopy (FT-IR) indicated that abundant hydroxyl and carboxyl functional groups existed on N-CQDs surface, which helped N-CQDs highly disperse in water. In addition, UV-vis spectroscopy and photoluminescence demonstrated that the N-CQDs obtained a 10.27% of quantum yield (QY) with relatively high and stable fluorescence performance. As a fluorescent sensor, the N-CQDs showed a fluorescence "ON-OFF" mechanism during the Cu2+ detection, which was induced from the electrons transition in surface functional groups. The final N-CQDs exhibited a wide linear relationship between fluorescence response and concentration of Cu2+ in range of 0.3-0.7 μM with a detection limit of 0.071 μM. Furthermore, the detection of Cu2+ in the simulating surface water (by adding interfering metal ions in purified water) and the tap water (from municipal water in Beijing) were used to verify N-CQDs practical application.

Carbon dot-based nanomaterials: a promising future nano-platform for targeting tumor-associated macrophages

The tumor microenvironment (TME) is the internal environment that tumors depend on for survival and development. Tumor-associated macrophages (TAMs), as an important part of the tumor microenvironment, which plays a crucial role in the occurrence, development, invasion and metastasis of various malignant tumors and has immunosuppressant ability. With the development of immunotherapy, eradicating cancer cells by activating the innate immune system has yielded encouraging results, however only a minority of patients show a lasting response. Therefore, in vivo imaging of dynamic TAMs is crucial in patient-tailored immunotherapy to identify patients who will benefit from immunotherapy, monitor efficacy after treatment, and identify alternative strategies for non-responders. Meanwhile, developing nanomedicines based on TAMs-related antitumor mechanisms to effectively inhibit tumor growth is expected to become a promising research field. Carbon dots (CDs), as an emerging member of the carbon material family, exhibit unexpected superiority in fluorescence imaging/sensing, such as near infrared imaging, photostability, biocompatibility and low toxicity. Their characteristics naturally integrate therapy and diagnosis, and when CDs are combined with targeted chemical/genetic/photodynamic/photothermal therapeutic moieties, they are good candidates for targeting TAMs. We concentrate our discussion on the current learn of TAMs and describe recent examples of macrophage modulation based on carbon dot-associated nanoparticles, emphasizing the advantages of their multifunctional platform and their potential for TAMs theranostics.

Facile and Green Synthesis of Highly Fluorescent Carbon Quantum Dots from Water Hyacinth for the Detection of Ferric Iron and Cellular Imaging

Natural biomass is used for facile synthesis of carbon quantum dots (CQDs) with high fluorescence, owing to its abundance, low cost, and eco-friendliness. In this study, a bottom-up hydrothermal method was used to prepare CQDs from water hyacinth (wh) at a constant temperature of 180 °C for 12 h. The synthesized wh-CQDs had uniform size, amorphous graphite structure, high water solubility (containing multiple hydroxyl and carboxyl groups on the surface), excitation light-dependent characteristics, and high photostability. The results showed that the aqueous solution of CQDs could detect Fe³⁺ rapidly, sensitively, and highly selectively with a detection limit of 0.084 μM in the linear range of 0–330 μM, which is much lower than the detection limit of 0.77 μM specified by the World Health Organization. More importantly, because the wh-CQDs were synthesized without any additives, they exhibited low toxicity to Klebsiella sp. cells even at high concentrations. Moreover, wh-CQDs emitted bright blue fluorescence in Klebsiella sp. cells, indicating its strong penetrating ability. Correspondingly, the fluorescent cell sorting results also revealed that the proportion of cell internalization reached 41.78%. In this study, wh-CQDs derived from natural biomass were used as high-performance fluorescent probes for Fe³⁺ detection and Klebsiella sp. imaging. This study is expected to have great significance for the application of biomass carbon spots in the field of cellular imaging and biology.

Heavy metal ion detection using green precursor derived carbon dots

The discovery of carbon dots (CDs) for environmental remediation has gained awareness because of the diverse economically viable and environmental friendly green precursors generated from biowastes and biomass compared to the toxic inorganic quantum dots and CDs prepared from chemical precursors. This review presents the recent progress in green CDs, including their synthesis methods and sensing applications for the detection of heavy metal ions such as Iron (III), Mercury (II), Copper (II), Chromium (VI), Lead (II), Arsenic (III), Cobalt (II), Aluminum (III), Silver (I), and Gold (III) which are prominent environmental pollutants. The comparison based on selectivity, sensitivity, quantum yield, detection limit, linear concentration range, and sensing mechanisms are also reported. This review also covers the performance of doped green CDs using heteroatoms, toward the detection of heavy metal ions. Apart from the future perspectives, this review provides a general guide to use such environmental friendly CDs to detect harmful pollutants.