Novel biodegradable poly(gamma-glutamic acid)–amphotericin B complexes show promise as improved amphotericin B formulations

Husk-like Zinc Oxide Nanoparticles Induce Apoptosis through ROS Generation in Epidermoid Carcinoma Cells: Effect of Incubation Period on Sol-Gel Synthesis and Anti-Cancerous Properties

This study effectively reports the influence of experimental incubation period on the sol-gel production of husk-like zinc oxide nanoparticles (ZNPs) and their anti-cancerous abilities. The surface morphology of ZNPs was studied with the help of SEM. With the use of TEM, the diameter range of the ZNPs was estimated to be ~86 and ~231 nm for ZNP^A and ZNP^B, prepared by incubating zinc oxide for 2 and 10 weeks, respectively. The X-ray diffraction (XRD) investigation showed that ZNPs had a pure wurtzite crystal structure. On prolonging the experimental incubation, a relative drop in aspect ratio was observed, displaying a distinct blue-shift in the UV-visible spectrum. Furthermore, RBC lysis assay results concluded that ZNP^A and ZNP^B both demonstrated innoxious nature. As indicated by MTT assay, reactive oxygen species (ROS) release, and chromatin condensation investigations against the human epidermoid carcinoma (HEC) A431 cells, ZNP^B demonstrated viable relevance to chemotherapy. Compared to ZNP^B, ZNP^A had a slightly lower IC₅₀ against A431 cells due to its small size. This study conclusively describes a simple, affordable method to produce ZNP nano-formulations that display significant cytotoxicity against the skin cancer cell line A431, suggesting that ZNPs may be useful in the treatment of cancer.

In-silico approach as a tool for selection of excipients for safer amphotericin B nanoformulations

Safer and efficacious Amphotericin B (AmB) nanoformulations can be designed by augmenting AmB in the monomeric or super-aggregated state, and restricting the aggregated state, by choosing the appropriate excipient, which can be facilitated by employing in-silico prediction as a tool. Excipients selected for the study included linear fatty acids from caprylic (C₈) to stearic(C₁₈) and the stearate based amphiphilic surfactants polyoxyl-15-hydroxystearate (PS15) and polyoxyl-40-stearate (PS40). Blend module was employed to determine the two miscibility parameters mixing energy (E_mix) and interaction parameter (χ). AmB-excipient interactions were modelled using molecular docking software. The fatty acids revealed a decrease in E_mix and χ values with increase in carbon chain length, suggesting enhanced affinity with increase in fatty acid hydrophobicity. Significantly higher affinity was observed with amphiphilic surfactants, in particular PS40 which exhibited negative values of E_mix and χ proposing very high degree of miscibility. Molecular docking study confirmed extensive interaction of all the excipients with the AmB polyene chain. PS15 and PS40 displayed in addition hydrophilic interactions with the mycosamine and polyol moieties with PS40 exhibiting complete wrapping of the AmB molecule. PS15 demonstrated only partial wrapping, attributed to the shorter ethylene oxide chain. AmB nanosuspensions (NS) were prepared by in situ nanoprecipitation using the excipients and the AmB state identified by UV scanning between 300 and 500 nm. AmB NS with fatty acids and PS15-AmB NS revealed a high intensity peak between 330 nm-350 nm of aggregated AmB and low intensity monomeric peaks between 405 and 415 nm reflecting predominance of the aggregated state. PS40-AmB NS on the other hand revealed complete absence of aggregated state and a high intensity peak between 321 and 325 nm which corresponded to the super-aggregated state. Also, the super-aggregated state slowly released the safe monomeric form without aggregate formation. Furthermore, very low hemolysis seen with PS40-AmB NS confirmed low toxicity attributed to the safer super-aggregated state and while higher hemolysis as anticipated was seen with PS15-AmB NS (aggregated state). The basis for selection of the appropriate excipient for design of safer AmB nanoformulations would be those excipients that exhibit negative values of miscibility parameters E_mix and χ, exhibit interaction with the hydrophobic and hydrophilic regions of AmB and demonstrate complete wrapping of AmB in the molecular docking study. Our study thus demonstrates feasibility of in-silico prediction as a practical tool for excipient selection for safer AmB nanoformulations.

Delivery strategies of amphotericin B for invasive fungal infections

Invasive fungal infections (IFIs) represent a growing public concern for clinicians to manage in many medical settings, with substantial associated morbidities and mortalities. Among many current therapeutic options for the treatment of IFIs, amphotericin B (AmB) is the most frequently used drug. AmB is considered as a first-line drug in the clinic that has strong antifungal activity and less resistance. In this review, we summarized the most promising research efforts on nanocarriers for AmB delivery and highlighted their efficacy and safety for treating IFIs. We have also discussed the mechanism of actions of AmB, rationale for treating IFIs, and recent advances in formulating AmB for clinical use. Finally, this review discusses some practical considerations and provides recommendations for future studies in applying AmB for combating IFIs.

Polymer–Drug Conjugates for Treating Local and Systemic Fungal Infections

In immunocompromised patients, fungal infections are the major cause of morbidity and mortality. Currently, three major classes of drugs—polyenes, azoles, and echinocandins—with different mechanisms of action are used as antifungals for systemic infections. However, these conventional drugs were reported to induce toxic effects due to their low specificity, narrow spectrum of activity and drug–drug interactions. Some of these limitations could be overcome by altering the properties of existing drugs through physical and chemical modifications. For example, modification of amphotericin B (AmB), a polyene antibiotic includes the micellar suspension of AmB in deoxycholic acid (Fungizone®), non-covalent AmB lipid complexes (ABLC™), liposomal AmB (AmBisome®), and AmB colloidal dispersion (Amphocil™). All these formulations ensure the smoother release of AmB accompanied by its restricted distribution in the kidney, thereby lowering its nephrotoxicity. Although various methods such as polymeric micelles, nanoparticles and dendrimers were explored for enhancing the efficacy of the antifungal drugs, polymer–drug conjugates of antifungal drugs have received more attention in recent years. Polymer–drug conjugates improve the aqueous solubility of water-insoluble drugs, are stable in storage and reduce the toxicity of highly toxic drugs and are capable of releasing the drug at the site of action. This chapter discusses the polymer conjugates of antifungal drugs, their merits, and demerits. Studies reported so far show that the polymer–drug conjugates have significant advantages compared to conventional dosage forms for antifungal therapy.

Development and anti-Candida evaluation of the vaginal delivery system of amphotericin B nanosuspension-loaded thermogel

Vulvovaginal candidiasis (VVC) is a typical kind of vaginal mucosal infection. Herein, we developed a novel vaginal delivery system of amphotericin B (AmB) nanosuspension-loaded thermogel (AmB NPs/thermogel) utilising pharmaceutical technique of high-pressure homogenisation and Poloxamer P407/P188 hydrogel. The stabiliser and hydrogel materials of the formulation were tested to maintain proper sol-gel transition as well as the relative stability of the particle size of AmB nanosuspension in the thermogel. The particle size of AmB nanosuspensions in the hydrogel was ∼247 nm. Transmission electron microscopy images confirmed the round-shape morphology of AmB nanoparticles in AmB NPs/thermogel, while that of irregular morphology of merely AmB nanosuspensions without stabiliser and hydrogel materials. AmB could be sustained release for ∼12 h in vitro. In vivo drug content in the vaginal tissue was also evaluated with 87, 47, 33 and 6.7% drug remaining after 1, 3, 6 and 12 h, respectively. The in vivo anti-Candida test was conducted on candidiasis-infected mice model. In the same drug dose of 2.5 mg/kg, AmB NPs/thermogel showed better anti-Candida efficiency compared with commercial AmB effervescent tablet. This delivery system might show some insights for the vaginal formulation development of other hydrophobic antifungal drugs.

Biomimetically engineered Amphotericin B nano-aggregates circumvent toxicity constraints and treat systemic fungal infection in experimental animals

Biomimetic synthesis of nanoparticles offers a convenient and bio friendly approach to fabricate complex structures with sub-nanometer precision from simple precursor components. In the present study, we have synthesized nanoparticles of Amphotericin B (AmB), a potent antifungal agent, using Aloe vera leaf extract. The synthesis of AmB nano-assemblies (AmB-NAs) was established employing spectro-photometric and electron microscopic studies, while their crystalline nature was established by X-ray diffraction. AmB-nano-formulation showed much higher stability in both phosphate buffer saline and serum and exhibit sustained release of parent drug over an extended time period. The as-synthesized AmB-NA possessed significantly less haemolysis as well as nephrotoxicity in the host at par with Ambisome®, a liposomized AmB formulation. Interestingly, the AmB-NAs were more effective in killing various fungal pathogens including Candida spp. and evoked less drug related toxic manifestations in the host as compared to free form of the drug. The data of the present study suggest that biomimetically synthesized AmB-NA circumvent toxicity issues and offer a promising approach to eliminate systemic fungal infections in Balb/C mice.