C-doped ZnO nanorods for photocatalytic degradation of p-aminobenzoic acid under sunlight

A state-of-the-art review on lignocellulosic biomass-derived activated carbon for adsorption and photocatalytic degradation of pollutants: a property and mechanistic study

A promising water treatment method involves using biomass-derived activated carbon (AC) to remove emerging pollutants from wastewater due to its adsorption capacity, cost-effectiveness, and sustainability. Notwithstanding, the existing literature lacks comprehensive studies that specifically focus on removing contaminants in water by comparing the effectiveness of adsorption and photocatalytic degradation methods. Additionally, there is not much emphasis on analyzing the combined processes of adsorption-photocatalytic degradation utilizing AC. Herein, this paper investigates the intricacies of adsorption-photocatalytic degradation mechanisms and contributing variables in the enhancement of performances using biomass-derived AC. Furthermore, this review paper presents a comprehensive examination of different biomass sources employed in the synthesis of AC. It also discusses the diverse techniques utilized for the fabrication of AC, including physical and chemical activation methods. Finally, the shortcomings and future prospects of biomass-derived AC have been addressed. This study offers significant insights for the development of future biomass-derived AC, with the goal of improving their efficiency and expanding their uses in wastewater treatment.

Novel furfural-complexed approach to synthesizing carbon-Doped ZnO with breakthrough photocatalytic efficacy

INTRODUCTION

The efficiency of zinc oxide (ZnO) nanoparticles for environmental decontamination is limited by their reliance on ultraviolet (UV) light and rapid charge carrier recombination. Carbon doping has been proposed to address these challenges by potentially enhancing visible light absorption and charge separation.

OBJECTIVES

This study aims to introduce a novel, single-step synthesis method for carbon-doped ZnO (C-Z) nanoparticles, leveraging the decomposition of zinc nitrate hexahydrate and furfural under a nitrogen atmosphere to improve photocatalytic activity under visible light.

METHODS

A series of C-Z variants (C-Z-1 to C-Z-5) and an undoped sample (ZnO-0) were synthesized. The influence of furfural on the synthesis process and doping mechanism was analyzed by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and UV-visible diffuse reflectance spectroscopy (DRS).

RESULTS

XPS confirmed the integration of carbon within the ZnO matrix, and XRD indicated increased lattice dimensions owing to doping. DRS revealed bandgap narrowing, suggesting enhanced charge separation. Among the variants, C-Z-3 significantly outperformed the others, showing a 12-fold increase in the photocatalytic degradation rate of Rhodamine B compared to undoped ZnO.

CONCLUSION

The developed single-step synthesis method for C-Z nanoparticles represents a major advancement in materials engineering for ecological applications. The enhanced photocatalytic activity under visible light, as demonstrated by C-Z-3, underscores the potential of these nanoparticles for environmental decontamination.

Construction of 0D/2D Schottky Heterojunctions of ZnO and Ti3C2 Nanosheets with the Enriched Transfer of Interfacial Charges for Photocatalytic Hydrogen Evolution

The development of cost-effective co-catalysts of high photocatalytic activity and recyclability is still a challenge in the energy transformation domain. In this study, 0D/2D Schottky heterojunctions, consisting of 0D ZnO and 2D Ti₃C₂, were successfully synthesized by the electrostatic self-assembling of ZnO nanoparticles on Ti₃C₂ nanosheets. In constructing these heterojunctions, Ti₃C₂ nanosheets acted as a co-catalyst for enhancing the transfer of excitons and their separation to support the photocatalytic response of ZnO. The as-prepared ZnO/Ti₃C₂ composites demonstrate an abbreviated charge transit channel, a huge interfacial contact area and the interfacial electrons’ transport potential. The extended optical response and large reactive area of the ZnO/Ti₃C₂ composite promoted the formation of excitons and reactive sites on the photocatalyst’s surface. The ZnO/Ti₃C₂ Schottky heterojunction showed significantly high photocatalytic activity for hydrogen production from a water–ethanol solution under the light illumination in the visible region. The hydrogen evolution overoptimized the ZnO/Ti₃C₂ composition with 30 wt.% of Ti₃C₂, which was eight times higher than the pristine ZnO. These findings can be helpful in developing 0D/2D heterojunction systems for photocatalytic applications by utilizing Ti₃C₂ as a low-cost co-catalyst.

Current advancements on the fabrication, modification, and industrial application of zinc oxide as photocatalyst in the removal of organic and inorganic contaminants in aquatic systems

Industrial wastewaters contain hazardous contaminants that pollute the environment and cause socioeconomic problems, thus demanding the employment of effective remediation procedures such as photocatalysis. Zinc oxide (ZnO) nanomaterials have emerged to be a promising photocatalyst for the removal of pollutants in wastewater owing to their excellent and attractive characteristics. The dynamic tunable features of ZnO allow a wide range of functionalization for enhanced photocatalytic efficiency. The current review summarizes the recent advances in the fabrication, modification, and industrial application of ZnO photocatalyst based on the analysis of the latest studies, including the following aspects: (1) overview on the properties, structures, and features of ZnO, (2) employment of dopants, heterojunction, and immobilization techniques for improved photodegradation performance, (3) applicability of suspended and immobilized photocatalytic systems, (4) application of ZnO hybrids for the removal of various types of hazardous pollutants from different wastewater sources in industries, and (5) potential of bio-inspired ZnO hybrid nanomaterials for photocatalytic applications using renewable and biodegradable resources for greener photocatalytic technologies. In addition, the knowledge gap in this field of work is also highlighted.

Lu modified ZnO/CNTs composite: A promising photocatalyst for hydrogen evolution under visible light illumination

We report high photocatalytic hydrogen evolution from water-glycerol mixture under visible light illumination using sol-gel method synthesized zinc oxide (ZnO), Lutetium (Lu) modified ZnO and Lu modified ZnO/CNTs composite. X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive X-ray (EDX), Brunauer-Emmett-Teller (BET), UV-Visible diffuse reflectance spectroscopy (UV-Vis DRS), photoluminescence (PL), X-ray photoelectron spectroscopy (XPS), photocurrent transient response and electrochemical impedance spectroscopy (EIS) Nyquist studies were used to determine the reason for improved photocatalytic hydrogen evolution. The highest hydrogen evolution rate of 380 µmolh^-1 was obtained for Lu modified ZnO/CNTs composite, 3.11 times the amount generated over Lu modified ZnO and 10.5 times than using pure ZnO sample. This efficient enhancement in the photocatalytic hydrogen evolution was apparently attributed to the red shift in the optical absorption, increased charge separation, high surface area, cleavage of glycerol by Lu and synergistic effect between Lu and CNTs. Moreover, the effect of Lu and CNTs loading on the photocatalytic hydrogen evolution activity of Lu modified ZnO/CNTs was also studied under analogous experimental conditions. A mechanism of photocatalytic hydrogen evolution by Lu modified ZnO/CNTs composite was also proposed. Additionally, synthesized samples showed prolonged photostability with steady hydrogen evolution in successive cycle runs. This report might attract much attention to design highly efficient and inexpensive photocatalyst for hydrogen evolution under visible light illumination.

Enhanced photocatalytic activity against crystal violet dye of Co and In doped ZnO thin films grown on PEI flexible substrate under UV and sunlight irradiations

This work is focused on the photocatalytic activities of undoped ZnO, Co (1%) doped ZnO (CZO) and In (1%) doped ZnO (IZO) thin films grown on flexible PEI (Polyetherimide) substrate by spray pyrolysis. The photodegradation of crystal violet dye was investigated under UV and sunlight irradiations. Doping and excitation energy effects on photocatalytic efficiencies are discussed. All ZnO thin films show high photocatalytic efficiency up to 80% under either UV or sunlight irradiations for 210 min. However, CZO has the higher photocatalytic performance under UV irradiation. While, the photodegradation efficiency of IZO was enhanced under sunlight irradiation due to the narrowing of its optical gap. These results are discussed based on structural, morphological and optical investigations. The photocatalytic stability of ZnO films was studied as well. So, after three photocatalysis cycles, all ZnO thin films still effective. The obtained results are promising for the use of doped ZnO/PEI as talented photocatalysts for applications in large surfaces with various geometries for photodegradation of hazardous pollutants.