Gadolinium- and lead-containing functional terpolymers for low energy X-ray protection

Flexible stretchable low-energy X-ray (30-80 keV) radiation shielding material: Low-melting-point Ga1In1Sn7Bi1 alloy/thermoplastic polyurethane composite

A highly flexible stretchable thermoplastic polyurethane (TPU) composite loaded with a low-melting-point Ga₁In₁Sn₇Bi₁ multiprincipal element alloy (LMPEA) was prepared, and its radiation shielding performance was evaluated. The fluid characteristic of LMPEA and the flexibility of TPU enable good interface compatibility. Ga₁In₁Sn₇Bi₁ LMPEA consists of two eutectic structures, and the liquid gallium-rich phases are distributed at the boundary of the InBi intermetallic compound and Sn solid solution. In the low-photon energy range of 30-80 keV, LMPEA has a theoretical specific lead equivalent of 0.803 mmPb/mm and a theoretical weight reduction of 17.27% compared with lead. To evaluate the photon attenuation capability for the LMPEA/TPU composites, the Phy-X procedure and Monte Carlo simulations were used to determine the shielding parameters, such as the mass attenuation coefficient, linear attenuation coefficient, half-value layer, tenth-value layer, mean free path, effective atomic number, and fast neutron removal cross section. The attenuation performance test of X-ray protective materials measured the actual lead equivalent. At the same thickness, the LMPEA/TPU composite (66.667, 50.000 wt% LMPEA loading) has a higher measured lead equivalent than the in-service medical shielding materials, which meets the lead equivalent requirements of X-ray protective clothing. LMPEA/TPU composites are nontoxic, lightweight, and have excellent low-energy X-ray shielding ability, offering great potential for application in medical wearable materials.

Ultrastretchable Composite Organohydrogels with Dual Cross-Links Enabling Multimodal Sensing

Building multiple cross-links or networks is a favorable way of diversifying applications of the hydrogels, which is also available for the organohydrogels prepared via the solvent replacement way. However, the situations become more complicated for organohydrogels due to the presence of replaced solvents. Therefore, the correlations between the multiple cross-links and final performance need to be better understood for the organohydrogels, which is vital for tailoring their inherent properties to expand final application scenarios. Polyacrylamide (PAM)/poly(vinyl alcohol) (PVA)/MXene composite organohydrogels with dual cross-links, namely, the covalently cross-linked PAM chains as the primary network and the physically cross-linked PVA/PAM chains with MXene particles as the secondary cross-links, were developed here for the study. The occurrence of the secondary cross-links plays multiple roles as sacrificial units endowing the system with ultrastretchability with an excellent strain-resistance effect and as temperature-sensitive units endowing the system with thermosensation ability with an outstanding temperature coefficient of resistance. Thus, the optimized sample can be used as a strain sensor with excellent environmental tolerance for detecting human motion as a pressure sensor to probe compression with weak deformation and as a thermal sensor to capture environmental temperature changes. This work provides valuable information on developing organohydrogels with superior performance for multimodal sensors.

Synthesizing of Metallized Acrylic Containing Both Gadolinium and Lead as a Transparent Radiation Shielding Material and Its Physical Properties

In this study, a series of optically transparent metallized acrylics containing Gd and Pb were synthesized by the bulk polymerization of Gd(MAA)3, Pb(MAA)2 and AM according to different polymerization procedures. The variation of their optic transmittance and mechanical performance with Gd contents was investigated. Then, quasi-static uniaxial tensile tests under different strain rates and temperatures were performed to study the influence of strain rate and temperature on the mechanical properties of radiation-shielding metallized acrylic containing both Gd and Pb. The tensile responses of this material distinctly exhibit nonlinear characteristics and strongly depend on both temperature and strain rate. Based on the experimental results, a modified Zhu–Wang–Tang (ZWT) constitutive model, in which the standard elastic component was replaced by the Mooney–Rivlin hyperelastic model, was implemented to characterize the observed both hyperelastic and viscoelastic behaviors. The constitutive parameters were expressed as functions of temperature and determined by experimental data. The model fitting results indicate that the selected constitutive model can accurately describe the nonlinear tensile stress–strain responses of metallized acrylic containing Gd and Pb. Furthermore, the great difference in constitutive parameters implies that the viscoelastic behavior of the as-prepared metallized acrylic affects the response to quasi-static tensile loading the most.