Distal femoral torsion: Differences between caucasians and asians. A multicentre computed tomography study of 515 distal femurs

Is lateral femoral condyle hypoplasia a feature of genu valgum? A morphological computed tomography study of 200 knees

BACKGROUND

Young surgeons are taught that genu valgum deformity is associated with hypoplasia of the lateral femoral condyle, despite the absence of supporting evidence. The objective of this study was to determine whether the lateral condyle was hypoplastic in genu valgum, by assessing the morphological features of the distal femur and their variations according to the severity of the coronal deformity.

HYPOTHESIS

The lateral femoral condyle is not hypoplastic in genu valgum deformity.

MATERIAL AND METHODS

The 200 included patients treated by unilateral total knee arthroplasty were divided into five groups based on their preoperative hip-knee-ankle (HKA) angle. The HKA angle, valgus cut angle (VCA), and anatomical lateral distal femoral angle (aLDFA) were measured on long-leg radiographs. Computed tomography images were then used to measure the medial and lateral anterior-posterior condylar lengths (mAPCL and lAPCL) and condylar thicknesses (mCT and lCT), distal femoral torsion (DFT), medial and lateral posterior condylar heights (mPCH and lPCH), and medial and lateral condylar volumes (mCV and lCV).

RESULTS

No significant differences were demonstrated across the five mechanical-axis groups for mAPCL, lAPCL, mCT, lCT, mPCH, or lPCH. The groups differed significantly regarding the VCA (p<0.0001), aLDFA (p<0.0001), DFT (p<0.0001), and mCV/lCV ratio (p<0.0001). VCA and aLDFA were smaller when the valgus exceeded 10°. DFT was similar in all varus knees (2.2°-2.6°) but significantly greater for knees with moderate (4.0°) or severe (6.2°) valgus. Finally, lCV was greater than mCV in valgus knees compared to varus knees.

CONCLUSION

The presence of lateral condyle hypoplasia in knees with genu valgum seems open to question. Apparent hypoplasia noted during the standard physical examination may be chiefly ascribable to distal valgus of the femoral epiphysis in the coronal plane and, with the knee flexed, to distal epiphyseal torsion, whose severity increases with the degree of valgus deformity. These considerations should be taken into account when performing distal femoral cuts for TKA, to ensure the restoration of normal anatomy in patients with genu valgus.

LEVEL OF EVIDENCE

IV.

Variable rotation of the femur does not affect outcome with patient specific alignment navigated balanced TKA

PURPOSE

Excessive internal and external rotation of the femoral component has been associated with poor outcome with a measured-resection neutral mechanical alignment TKA. This technique assumes that every tibia is in 3° of varus so the femoral component is placed in 3° of external rotation relative to the posterior condylar axis to enable a balanced flexion gap. This is not the case as there is wide variability in the bony anatomy and soft tissue envelope of the knee so flexion imbalance may occur. A patient-specific alignment navigated balanced TKA technique was performed whereby the tibia is cut anatomically up to 3° of varus, then a ligament tensor is used to determine the optimal femoral component position for a balanced TKA. This results in variable femoral rotation. The hypothesis is that matching the femoral component rotation to the patient's anatomic tibial cut and soft tissue envelope will not affect clinical outcome METHODS: In a single surgeon series 287 consecutive varus aligned TKA's were performed using this technique with an Attune cruciate retaining fixed bearing TKA with an anatomic patella resurfacing. The angle between the posterior femoral cuts and the posterior condylar axis was collected using Brainlab software. Functional scores were collected prospectively preoperatively and at two years. The variable femoral component rotation was correlated with and compared with the functional outcome scores.

RESULTS

The femoral rotation varied from 7° of internal rotation to 8°of external rotation relative to the posterior condylar axis. The mean rotation was 1.1° of external rotation. There was no significant difference in the Oxford score, WOMAC score, Forgotten Knee Score, KOOS Joint Replacement score or Patient Satisfaction in respect to the variable femoral rotation relative to the posterior condylar axis.

CONCLUSION

When a more anatomic-balanced TKA technique is used variable femoral rotation will not affect clinical outcome at two years LEVEL OF EVIDENCE: II Prospective Cohort Study.

Using MRI Measurement to Improve Accuracy of Femoral Component Sizing in Oxford Unicompartmental Knee Arthroplasty

Unicompartmental knee arthroplasty (UKA) can achieve better kinematics and faster recovery than total knee arthroplasty. The Phase III Oxford UKA system has five sizes of femoral components to approximate the normal knee geometry. However, these different sizes may also induce problems, such as the misselection of component size. Different criteria have been proposed to predict the ideal size preoperatively. However, no single method can be applied universally. Therefore, this study aimed to develop a preoperative measurement using knee magnetic resonance imaging (MRI) to predict femoral component size. A total of 68 patients who underwent UKA were investigated from June 2019 to April 2020. 16 knees using a different MRI protocol were excluded. We developed an MRI measurement method to determine femoral size instead of gender- and height-based methods. The accuracy of different methods was compared using postoperative true lateral view radiographs. Three different kinds of gender- and height-based criteria, preoperative templating and intraoperative spoon measurement were compared. The accuracy of MRI measurement was 90.3%. Therefore, a significant difference was found between MRI measurements and all other methods, such as templating or gender- and height-based methods. In conclusion, the MRI measurement method can be concluded to accurately predict femoral component size in UKA. This method could be used regardless of different ethnic groups, individual knee geometry, or soft tissue tension.

Lower early revision rates after uncemented Oxford Unicompartmental Knee Arthroplasty (UKA) than cemented Oxford UKA: A meta-analysis

BACKGROUND

UKA has been proved to offer good results in treating patients with unicompartmental knee osteoarthritis (OA). However, there is still a controversy about the better fixation mode in UKA procedure between cemented and uncemented prosthesis. Therefore, this meta-analysis was conducted to compare clinical and radiological outcomes of cemented versus uncemented Oxford UKA.

HYPOTHESIS

The study surmised that uncemented Oxford UKA was associated with shorter operation time, higher function scores, lower revision rate and less radiolucency than cemented Oxford UKA.

METHODS

A meta-analysis to compare postoperative outcomes between cemented and uncemented Oxford UKA wsa conducted. The primary outcomes included Oxford knee score (OKS), revision rate, and incidence of radiolucency. The secondary outcomes included operation time, knee society score (KSS), Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), range of motion (ROM). PubMed, Embase, Web of Science, the Cochrane Library and China national knowledge infrastructure were searched until April, 2020 to identify studies for including. Relevant data were analyzed using RevMan v5.3.

RESULTS

We identified nine studies involving 901 patients meeting our inclusion criteria. No significant difference of OKS was found in both groups. Compared with cemented group, uncemented Oxford UKA group was associated with lower revision rate (95% CI: 0.90 to 3.73; OR=1.83) and less radiolucent lines (95% CI: 0.79 to 9.52; OR=2.75) after following up for at least 2years. The operation time was significantly shorter by 10.12minutes (95% CI: p<0.00001) in the uncemented group when compared against the cemented group. The KSS, WOMAC, ROM were not significantly different between two groups.

CONCLUSIONS

Uncemented Oxford UKA had lower revision rate, shorter operation time and less radiolucent lines than cemented Oxford UKA did. There is still need for more long follow-up clinical trials with high evidence level to determine which method of fixation is of preferable for Oxford UKA in the future.

LEVEL OF EVIDENCE

I.

Coronal and axial alignment relationship in Caucasian patients with osteoarthritis of the knee

Individualized pre-operative assessment of the patterns of the lower extremity anatomy and deformities in patients undergoing total knee arthroplasty seems essential for a successful surgery. In the present study, we investigated the relationship among the coronal alignment and the rotational profile of the lower extremities in the Caucasian population with end-stage knee osteoarthritis. We conducted a prospective study of 385 knees that underwent a pre-operative three-dimensional computed tomography-based model. The lower extremity alignment was determined (mechanical tibiofemoral or hip-knee-ankle angle, supplementary angle of the femoral lateral distal angle, and proximal medial tibial angle). For each case, the femoral distal rotation (condylar twist angle), the femoral proximal version, and the tibial torsion were determined. As the coronal alignment changed from varus to valgus, the femoral external rotation increased (r = 0.217; p < 0.0005). As the coronal alignment changed from varus to valgus, the external tibial torsion increased (r = 0.248; p < 0.0005). No correlation was found between the global coronal alignment and the femoral version. The present study demonstrates a linear relationship between the coronal alignment and the rotational geometry of the distal femur. This correlation also occurs with the tibial torsion. Perhaps outcomes of total knee arthroplasty surgery might be improved by addressing these deformities as well.

Minimum 10 years clinical results of an anatomical short stem with a proximal hydroxyapatite coating

OBJECTIVES

The CentPillar stem (Stryker Orthopaedics), an anatomical short stem, was designed to match the proximal femoral canal shape in both patients with normal hips and those with developmental dysplasia of the hip (DDH). The long-term outcomes of the CentPillar stem was examined herein.

METHODS

In total, 222 hips that underwent total hip arthroplasty using the CentPillar stem were analyzed. DDH was the main reason for surgery (79.3%). Implant survivorship was assessed using Kaplan-Meier analysis. For radiographic evaluation, stress shielding was assessed using the Engh classification. For functional evaluation, patients' ability to perform deep hip bending activities (sit on the floor, squat, and sit straight) was assessed.

RESULTS

During a median follow-up of 13.1 years, 2 stem revisions were performed (aseptic loosening and late hematogenous periprosthetic infection), and the overall cumulative implant survival rate was 99.0% at 15 years. In the radiographic evaluation, grade >3 stress shielding was found in only one hip. More than 80% of the patients were able to perform each of the three deep hip bending activities.

CONCLUSIONS

Good fixation at the proximal part of the femur was obtained, and the implant survival rate of the CentPillar stem was excellent during a long-term follow-up.

Gait Analysis after Total Knee Arthroplasty Assisted by 3D-Printed Personalized Guide

Background

With the development of three-dimensional printing (3DP) technology, the patient-specific instrumentation (PSI) has been widely applied in total knee arthroplasty (TKA). The purpose of this study was to compare the gait parameters of patients with 3DP personalized guide-assisted and standard TKA.

Methods

Retrospective analysis of the advanced knee OA cases in our hospital between June 2017 and June 2018 was conducted. 30 cases received 3DP personalized guide-assisted TKA (group A), and 60 patients who underwent standard TKA during the same period were in group B and group C according to the computed tomography (CT) measurement results, each with 30 cases. Hip–knee–ankle angle (HKA), patella transverse axis-femoral transepicondylar axis angle (PFA), and gait parameters were statistically analyzed. The function was assessed by Hospital for Specific Surgery (HSS) and Knee Society Score (KSS).

Results

The mean follow-up period was 12.3 months in the three groups. The knee max flexion angle at the swing phase of group A was larger than group B and group C (P < 0.05), there was no statistically significant difference in other gait parameters. The mean PFA of group A was smaller than that of group B and group C (P < 0.05). While, the HKA, HSS, and KSS scores of three groups showed no significant difference.

Conclusion

3DP personalized guide technology could improve the gait parameters after surgery, specifically reflected in the knee max flexion angle at the swing phase. It could also assist in the reconstruction of more accurate patellar tracking and rotational alignment in TKA, avoiding the occurrence of insufficient or excessive extorsion.

Postoperative alignment but not femoral coronal bowing is a significant longevity factor after total knee arthroplasty

BACKGROUND

Femoral coronal bowing (FCB) has been reported to be a risk factor for mechanical malalignment after total knee arthroplasty (TKA). However, the effects of FCB on the long-term survivorship (when postoperative mechanical alignment (MA) is neutral after TKA) have not been determined.

HYPOTHESIS

The effects of FCB on the cumulative survivorship after TKA may be significantly smaller compared with those of MA.

PATIENTS AND METHODS

Consecutive 328 knees of 211 patients (10 males, 201 females) who underwent TKA between 1995 and 2009 (mean age of 64.2±6.7 years at the time of TKA, mean follow-up period of 11.9±2.5 years) were retrospectively evaluated. FCB and MA were evaluated using preoperative and immediate postoperative whole-leg anteroposterior radiographs, respectively. The patients were grouped according to FCB and postoperative MA, which included group A (FCB≤5°, MA≤3°), B (FCB>5°, MA≤3°), C (FCB>5°, MA>3°), and D (FCB≤5°, MA>3°). Primary end-point was defined as aseptic mechanical failures requiring revision TKA. Survivorship was assessed using the Kaplan-Meier method and compared using log-rank tests. Factors associated with the risk of aseptic mechanical failures were analyzed by Cox regression analysis. Preoperative and final follow-up clinical outcomes were assessed using Hospital for Special Surgery (HSS) scores.

RESULTS

Group A, B, C, and D included 190, 73, 40, and 25 knees, respectively. The 10-year survivorship was similar between group A and B (96.3±1.4% vs. 98.6±1.4%; p=0.733) and group C and D (87.3±5.3 vs. 87.6±6.7%; p=0.974); however, it was significantly higher in group B than in group C (p=0.036) and in group A than in group D (p=0.005). Age (OR=0.991; 95% CI 0.906-1.085; p=0.002) and MA>3° (OR=3.645; 95% CI 1.744-7.604; p=0.001) were associated with the risk of aseptic mechanical failures. The mean preoperative and final HSS scores in the four groups were not significantly different.

DISCUSSION

Marked FCB was not associated with long-term survivorship for knees with neutral alignment after TKA. However, non-neutral postoperative alignment reduced long-term survivorship for knees with marked FCB.

LEVEL OF EVIDENCE

III, Retrospective comparative cohort study.