Pre-treatment of central venous catheters with the cathelicidin BMAP-28 enhances the efficacy of antistaphylococcal agents in the treatment of experimental catheter-related infection

Antibiotic Resistant Biofilms and the Quest for Novel Therapeutic Strategies

Antimicrobial resistance (AMR) is one of the major leading causes of death around the globe. Present treatment pipelines are insufficient to overcome the critical situation. Prominent biofilm forming human pathogens which can thrive in infection sites using adaptive features results in biofilm persistence. Considering the present scenario, prudential investigations into the mechanisms of resistance target them to improve antibiotic efficacy is required. Regarding this, developing newer and effective treatment options using edge cutting technologies in medical research is the need of time. The reasons underlying the adaptive features in biofilm persistence have been centred on different metabolic and physiological aspects. The high tolerance levels against antibiotics direct researchers to search for novel bioactive molecules that can help combat the problem. In view of this, the present review outlines the focuses on an opportunity of different strategies which are in testing pipeline can thus be developed into products ready to use.

Our Experience over 20 Years: Antimicrobial Peptides against Gram Positives, Gram Negatives, and Fungi

Antibiotic resistance is rapidly increasing, and new anti-infective therapies are urgently needed. In this regard, antimicrobial peptides (AMPs) may represent potential candidates for the treatment of infections caused by multiresistant microorganisms. In this narrative review, we reported the experience of our research group over 20 years. We described the AMPs we evaluated against Gram-positive, Gram-negative, and fungi. In conclusion, our experience shows that AMPs can be a key option for treating multiresistant infections and overcoming resistance mechanisms. The combination of AMPs allows antibiotics and antifungals that are no longer effective to exploit the synergistic effect by restoring their efficacy. A current limitation includes poor data on human patients, the cost of some AMPs, and their safety, which is why studies on humans are needed as soon as possible.

Colonization and Infection of Indwelling Medical Devices by Staphylococcus aureus with an Emphasis on Orthopedic Implants

The use of indwelling medical devices has constantly increased in recent years and has revolutionized the quality of life of patients affected by different diseases. However, despite the improvement of hygiene conditions in hospitals, implant-associated infections remain a common and serious complication in prosthetic surgery, mainly in the orthopedic field, where infection often leads to implant failure. Staphylococcus aureus is the most common cause of biomaterial-centered infection. Upon binding to the medical devices, these bacteria proliferate and develop dense communities encased in a protective matrix called biofilm. Biofilm formation has been proposed as occurring in several stages-(1) attachment; (2) proliferation; (3) dispersal-and involves a variety of host and staphylococcal proteinaceous and non-proteinaceous factors. Moreover, biofilm formation is strictly regulated by several control systems. Biofilms enable staphylococci to avoid antimicrobial activity and host immune response and are a source of persistent bacteremia as well as of localized tissue destruction. While considerable information is available on staphylococcal biofilm formation on medical implants and important results have been achieved on the treatment of biofilms, preclinical and clinical applications need to be further investigated. Thus, the purpose of this review is to gather current studies about the mechanism of infection of indwelling medical devices by S. aureus with a special focus on the biochemical factors involved in biofilm formation and regulation. We also provide a summary of the current therapeutic strategies to combat biomaterial-associated infections and highlight the need to further explore biofilm physiology and conduct research for innovative anti-biofilm approaches.

Eradicating biofilm infections: an update on current and prospective approaches

Biofilm formation is a multifactorial process and often a multi-species endeavour that involves complex signalling networks, chemical gradients, bacterial adhesion, and production or acquisition of matrix components. Antibiotics remain the main choice when treating bacterial biofilm-associated infections despite their intrinsic tolerance to antimicrobials, and propensity for acquisition and rapid dissemination of antimicrobial resistance within the biofilm. Eliminating hard to treat biofilm-associated infections that are antibiotic resistant will demand a holistic and multi-faceted approach, targeting multiple stages of biofilm formation, many of which are already in development. This mini review will highlight the current approaches that are employed to treat bacterial biofilm infections and discuss new approaches in development that have promise to reach clinical practice.

Antibiofilm Peptides: Relevant Preclinical Animal Infection Models and Translational Potential

Biofilm-forming bacteria may be 10-1000 times more resistant to antibiotics than planktonic bacteria and represent about 75% of bacterial infections in humans. Antibiofilm treatments are scarce, and no effective therapies have been reported so far. In this context, antibiofilm peptides (ABPs) represent an exciting class of agents with potent activity against biofilms both in vitro and in vivo. Moreover, murine models of bacterial biofilm infections have been used to evaluate the in vivo effectiveness of ABPs. Therefore, here we highlight the translational potential of ABPs and provide an overview of the different clinically relevant murine models to assess ABP efficacy, including wound, foreign body, chronic lung, and oral models of infection. We discuss key challenges to translate ABPs to the clinic and the pros and cons of the existing murine biofilm models for reliable assessment of the efficacy of ABPs.

Bismuth nanoparticles obtained by a facile synthesis method exhibit antimicrobial activity against Staphylococcus aureus and Candida albicans

Background

Bismuth compounds are known for their activity against multiple microorganisms; yet, the antibiotic properties of bismuth nanoparticles (BiNPs) remain poorly explored. The objective of this work is to further the research of BiNPs for nanomedicine-related applications. Stable Polyvinylpyrrolidone (PVP)-coated BiNPs were produced by a chemical reduction process, in less than 30 min.

Results

We produced stable, small, spheroid PVP-coated BiNPs with a crystalline organization. The PVP-BiNPs showed potent antibacterial activity against the pathogenic bacterium Staphylococcus aureus and antifungal activity against the opportunistic pathogenic yeast Candida albicans, both under planktonic and biofilm growing conditions.

Conclusions

Our results indicate that BiNPs represent promising antimicrobial nanomaterials, and this facile synthetic method may allow for further investigation of their activity against a variety of pathogenic microorganisms.

Bismuth nanoparticles obtained by a facile synthesis method exhibit antimicrobial activity against Staphylococcus aureus and Candida albicans

BACKGROUND

Bismuth compounds are known for their activity against multiple microorganisms; yet, the antibiotic properties of bismuth nanoparticles (BiNPs) remain poorly explored. The objective of this work is to further the research of BiNPs for nanomedicine-related applications. Stable Polyvinylpyrrolidone (PVP)-coated BiNPs were produced by a chemical reduction process, in less than 30 min.

RESULTS

We produced stable, small, spheroid PVP-coated BiNPs with a crystalline organization. The PVP-BiNPs showed potent antibacterial activity against the pathogenic bacterium Staphylococcus aureus and antifungal activity against the opportunistic pathogenic yeast Candida albicans, both under planktonic and biofilm growing conditions.

CONCLUSIONS

Our results indicate that BiNPs represent promising antimicrobial nanomaterials, and this facile synthetic method may allow for further investigation of their activity against a variety of pathogenic microorganisms.

Nonconventional Therapeutics against Staphylococcus aureus

Staphylococcus aureus is one of the most important human pathogens that is responsible for a variety of diseases ranging from skin and soft tissue infections to endocarditis and sepsis. In recent decades, the treatment of staphylococcal infections has become increasingly difficult as the prevalence of multi-drug resistant strains continues to rise. With increasing mortality rates and medical costs associated with drug resistant strains, there is an urgent need for alternative therapeutic options. Many innovative strategies for alternative drug development are being pursued, including disruption of biofilms, inhibition of virulence factor production, bacteriophage-derived antimicrobials, anti-staphylococcal vaccines, and light-based therapies. While many compounds and methods still need further study to determine their feasibility, some are quickly approaching clinical application and may be available in the near future.

Biofilm formation by staphylococci in health-related environments and recent reports on their control using natural compounds

Staphylococci are Gram-positive bacteria that are ubiquitous in the environment and able to form biofilms on a range of surfaces. They have been associated with a range of human health issues such as medical device-related infection, localized skin infection, or direct infection caused by toxin production. The extracellular material produced by these bacteria resists antibiotics and host defence mechanism which complicates the treatment process. The commonly reported Staphylococcus species are Staphylococcus aureus and S. epidermidis as they inhabit human bodies. However, the emergence of other staphylococci, such as S. haemolyticus, S. lugdunensis, S. saprophyticus, S. capitis, S. saccharolyticus, S. warneri, S. cohnii, and S. hominis, is also of concern and they have been associated with biofilm formation. This review critically assesses recent cases on the biofilm formation by S. aureus, S. epidermidis, and other staphylococci reported in health-related environments. The control of biofilm formation by staphylococci using natural compounds is specifically discussed as they represent potential anti-biofilm agents which may reduce the burden of antibiotic resistance.

Staphylococcus aureus Evasion of Host Immunity in the Setting of Prosthetic Joint Infection: Biofilm and Beyond

PURPOSE OF REVIEW

The incidence of complications from prosthetic joint infection (PJI) is increasing, and treatment failure remains high. We review the current literature with a focus on Staphylococcus aureus pathogenesis and biofilm, as well as treatment challenges, and novel therapeutic strategies.

RECENT FINDINGS

S. aureus biofilm creates a favorable environment that increases antibiotic resistance, impairs host immunity, and increases tolerance to nutritional deprivation. Secreted proteins from bacterial cells within the biofilm and the quorum-sensing agr system contribute to immune evasion. Additional immunoevasive properties of S. aureus include the formation of staphylococcal abscess communities (SACs) and canalicular invasion. Novel approaches to target biofilm and increase resistance to implant colonization include novel antibiotic therapy, immunotherapy, and local implant treatments. Challenges remain given the diverse mechanisms developed by S. aureus to alter the host immune responses. Further understanding of these processes should provide novel therapeutic mechanisms to enhance eradication after PJI.

Biomaterial Strategies to Reduce Implant-Associated Infections

Although the prophylaxis in controlling sterility within the operating room environment has been greatly improved, implant-associated infection is still one of the most serious complications in implant surgeries due to the existence of immune depression in the peri-implant area. The antibacterial ability of materials themselves logically becomes an important factor in preventing implant-associated infections. With the understanding of the pathogenesis of implant-associated infections, many approaches have been developed through providing an anti-adhesive surface, delivering antibacterial agents to disrupt cell-cell communication and preventing bacteria aggregation or biofilm formation, or killing bacteria directly (lysing the cell membrane). In this article, we review the current strategies in improving the antibacterial ability of materials to prevent implant infection and further present promising tactics in materials design and applications.

Control of Biofilm Formation: Antibiotics and Beyond

Biofilm-associated bacteria are less sensitive to antibiotics than free-living (planktonic) cells. Furthermore, with variations in the concentration of antibiotics throughout a biofilm, microbial cells are often exposed to levels below inhibitory concentrations and may develop resistance. This, as well as the irresponsible use of antibiotics, leads to the selection of pathogens that are difficult to eradicate. The Centers for Disease Control and Prevention use the terms "antibiotic" and "antimicrobial agent" interchangeably. However, a clear distinction between these two terms is required for the purpose of this assessment. Therefore, we define "antibiotics" as pharmaceutically formulated and medically administered substances and "antimicrobials" as a broad category of substances which are not regulated as drugs. This comprehensive minireview evaluates the effect of natural antimicrobials on pathogens in biofilms when used instead of, or in combination with, commonly prescribed antibiotics.

Staphylococcal biofilms: quest for the magic bullet

The biofilm phenotype has been recognized only relatively recently in medical history but it has rapidly become clear that the development of many, if not the majority of bacterial infections depends upon the formation of a biofilm. Medical device-related infections are one of the clearest examples of biofilm-dependent infections. Bacteria proficiently adhere to and establish biofilms on synthetic surfaces, and to date, no material has proven to completely preclude bacterial adherence. Any inserted device can be colonized but intravenous catheters, due to their widespread use, are the most commonly colonized devices. As many as half a million catheter-related infections occur each year in the United States and the staphylococci, in particular, Staphylococcus aureus and Staphylococcus epidermidis, are the leading cause. Biofilms exhibit tolerance to biocides, chemotherapeutic agents, and host-immune defenses and subsequently, biofilm-associated infections are extremely difficult to treat, frequently chronic, and often recurrent, making them a confounding clinical problem. Development of an effective strategy for preventing and/or treating these infections is of paramount importance and consequently, the search for novel approaches to target the biofilm phenotype has exploded in recent years. Because the biofilm phenotype is complex, targets for antibiofilm approaches are numerous and this line of research is significantly expanding our knowledge about the biofilm mode of growth and its role in disease. This review highlights a number of antibiofilm approaches that are currently under investigation as novel interventions for staphylococcal infections.

Biodegradable hydrophilic polyurethane PEGU25 loading antimicrobial peptide Bmap-28: a sustained-release membrane able to inhibit bacterial biofilm formation in vitro

Catheter-related infection makes up a large part of hospital infection and contributes 80% to all nosocomial urological infection, costing hundreds of millions dollar per year for treatment. Biodegradable hydrophilic material incorporating antibiotic substance is a promising way to prevent catheter-related infection. And antimicrobial peptide seems an optimal drug for its desirable antibiotic effect. In the current research, we produced a new kind of antibiotic material by incorporating antimicrobial peptide Bmap-28 with polyurethane PEGU25 and tested its effect on Proteus mirabilis in vitro. Compared with the control group, PEGU25 membrane incorporating Bmap-28 had a significant lower bacteria load after co-cultured with the Proteus mirabilis. And its antibiotic effect could be observed throughout the whole 7-day test. Also the Bmap-28 membrane could delay catheter obstruction caused by encrustation. Our findings reveal that PEGU25 incorporating Bmap-28 can well inhibit bacterial biofilm formation of common pathogens for catheter-related urinary tract infection in vitro, which makes it a promising antibiotic material for medical tubes for urology.

Treatment of microbial biofilms in the post-antibiotic era: prophylactic and therapeutic use of antimicrobial peptides and their design by bioinformatics tools

The treatment for biofilm infections is particularly challenging because bacteria in these conditions become refractory to antibiotic drugs. The reduced effectiveness of current therapies spurs research for the identification of novel molecules endowed with antimicrobial activities and new mechanisms of antibiofilm action. Antimicrobial peptides (AMPs) have been receiving increasing attention as potential therapeutic agents, because they represent a novel class of antibiotics with a wide spectrum of activity and a low rate in inducing bacterial resistance. Over the past decades, a large number of naturally occurring AMPs have been identified or predicted from various organisms as effector molecules of the innate immune system playing a crucial role in the first line of defense. Recent studies have shown the ability of some AMPs to act against microbial biofilms, in particular during early phases of biofilm development. Here, we provide a review of the antimicrobial peptides tested on biofilms, highlighting their advantages and disadvantages for prophylactic and therapeutic applications. In addition, we describe the strategies and methods for de novo design of potentially active AMPs and discuss how informatics and computational tools may be exploited to improve antibiofilm effectiveness.

Anti-infective drug development for MRSA

Staphylococcus aureus is an important pathogen linked to serious infections both in the hospital and the community settings. The challenge to treat infections caused by S. aureus has increased because of the emergence of multidrug-resistant strains such as methicillin-resistant S. aureus (MRSA). A limited spectrum of antibiotics is available to treat MRSA infections. This chapter reviews antimicrobial agents currently in use for the treatment of MRSA infections as well as agents that are in various stages of development. This chapter also reviews the alternate approaches that are being explored for the treatment of staphylococcal infections.

Quorum sensing inhibitor FS3-coated vascular graft enhances daptomycin efficacy in a rat model of staphylococcal infection

The aim of the study was to investigate the efficacy of the quorum sensing inhibitor FS3 and daptomycin in preventing prosthesis biofilm in a rat model of staphylococcal vascular graft infection. Graft infections were established in the back subcutaneous tissue of adult male Wistar rats by implantation of Dacron prostheses followed by topical inoculation with 2×10(7) colony-forming units of Staphylococcus aureus, strain Smith diffuse. The study included a control group, a contaminated group that did not receive any antibiotic prophylaxis and three contaminated groups that received: (i) intraperitoneal daptomycin, (ii) FS3-soacked graft, and (iii) daptomycin plus FS3-soaked graft, respectively. Each group included 15 animals. The infection burden was evaluated by using sonication and quantitative agar culture. Moreover, an in vitro binding-study was performed to quantify the how much FS3 was coated to the surface of the prosthesis. The in vitro studies showed, that minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) values for daptomycin were lower in presence of FS3. In in vivo studies, when tested alone, daptomycin and FS3 showed good efficacies. Their combination showed efficacies significantly higher than that of each single compound. Daptomycin is an important candidate for prevention of staphylococcal biofilm related infection and FS3 could serve as an interesting anti-staphylococcal antibiotic enhancer.

New trends in peptide-based anti-biofilm strategies: a review of recent achievements and bioinformatic approaches

Antimicrobial peptides (AMPs) have a broad spectrum of activity and unspecific mechanisms of action. Therefore, they are seen as valid alternatives to overcome clinically relevant biofilms and reduce the chance of acquired resistance. This paper reviews AMPs and anti-biofilm AMP-based strategies and discusses ongoing and future work. Recent studies report successful AMP-based prophylactic and therapeutic strategies, several databases catalogue AMP information and analysis tools, and novel bioinformatics tools are supporting AMP discovery and design. However, most AMP studies are performed with planktonic cultures, and most studies on sessile cells test AMPs on growing rather than mature biofilms. Promising preliminary synergistic studies have to be consubstantiated and the study of functionalized coatings with AMPs must be further explored. Standardized operating protocols, to enforce the repeatability and reproducibility of AMP anti-biofilm tests, and automated means of screening and processing the ever-expanding literature are still missing.

Mini-review: Antimicrobial central venous catheters--recent advances and strategies

Central venous catheters (CVCs) nowadays constitute critical devices used in medical care, namely in intensive care units. However, CVCs also represent one of the indwelling medical devices with enhanced risk of nosocomial device-related infection. Catheter-related infections (CRIs) are a major cause of patient morbidity and mortality, often justifying premature catheter removal and an increase in costs and use of resources. Adhesion and subsequent biofilm formation on the surfaces of indwelling catheters is elemental to the onset of pathogenesis. Seeking the prevention of CVC colonisation and CRI, a variety of approaches have been studied, tested and, in some cases, already applied in clinical practice. This review looks at the current preventive strategies often used to decrease the risk of CRIs due to colonization and biofilm formation on catheter surfaces, as well as at the more recent approaches under investigation.

Stability, toxicity, and biological activity of host defense peptide BMAP28 and its inversed and retro-inversed isomers

Host defense peptides (HDPs) contribute to immune defense through direct antimicrobial activity as well as modulation of host immune responses. While the antimicrobial activity of HDPs has been successfully exploited as topical antibiotics, their use as systemic immunomodulatory antimicrobials has been limited by their toxicity and biological instability. Peptide modification strategies to address these characteristics, while maintaining biological activity, are likely essential to capture the full therapeutic potential of HDPs. Here we investigate the stability, toxicity, and biological activity of the L, inversed (D), and retro-inversed (RI) isomers of BMAP28. The D and RI isomers both form symmetrically related structures to L BMAP28 and resist proteolytic degradation. With respect to toxicity, the considerable hemolytic activity of L BMAP28 is approximately halved with the D isomer and eliminated with RI BMAP28. Furthermore, while D BMAP28 maintains the same cytotoxicity profile against epithelial cells and monocytes as the natural peptide, RI BMAP28 is markedly less toxic against these cell types. As prophylactic antimicrobials, all three isomers significantly reduced bacterial loads [99.99% bacterial clearance by each peptide at the highest dose (20 mg kg(-1) )], when administered 18 h prior to challenge in a mouse model of peritoneal infection. This protection appears to be mediated through neutrophil recruitment and activation of macrophages for bacterial clearance. Collectively, the increased stability and retained biological activity of D and RI BMAP28 make these isomers attractive as antimicrobial therapeutics. In particular, the protection conferred by RI BMAP28, combined with its reduced toxicities, make it a strong candidate for further consideration.

Effect of BMAP-28 antimicrobial peptides on Leishmania major promastigote and amastigote growth: role of leishmanolysin in parasite survival

Background

Protozoan parasites, such as Leishmania, still pose an enormous public health problem in many countries throughout the world. Current measures are outdated and have some associated drug resistance, prompting the search into novel therapies. Several innovative approaches are under investigation, including the utilization of host defence peptides (HDPs) as emerging anti-parasitic therapies. HDPs are characterised by their small size, amphipathic nature and cationicity, which induce permeabilization of cell membranes, whilst modulating the immune response of the host. Recently, members of the cathelicidin family of HDPs have demonstrated significant antimicrobial activities against various parasites including Leishmania. The cathelicidin bovine myeloid antimicrobial peptide 28 (BMAP-28) has broad antimicrobial activities and confers protection in animal models of bacterial infection or sepsis. We tested the effectiveness of the use of BMAP-28 and two of its isomers the D-amino acid form (D-BMAP-28) and the retro-inverso form (RI-BMAP-28), as anti-leishmanial agents against the promastigote and amastigote intracellular Leishmania major lifecycle stages.

Methodology/Principal Findings

An MTS viability assay was utilized to show the potent antiparasitic activity of BMAP-28 and its protease resistant isomers against L. major promastigotes in vitro. Cell membrane permeability assays, caspase 3/7, Tunel assays and morphologic studies suggested that this was a late stage apoptotic cell death with early osmotic cell lysis caused by the antimicrobial peptides. Furthermore, BMAP-28 and its isomers demonstrated anti-leishmanial activities against intracellular amastigotes within a macrophage infection model.

Conclusions/Significance

Interestingly, D-BMAP-28 appears to be the most potent antiparasitic of the three isomers against wild type L. major promastigotes and amastigotes. These exciting results suggest that BMAP-28 and its protease resistant isomers have significant therapeutic potential as novel anti-leishmanials.

Protozoan parasites are the causative agent of much disease in tropical areas of the world. Currently, the control of these diseases is dependent on outdated drug treatment, with associated high toxicity and drug resistance. There is an urgent need for novel anti-parasitic therapies. One emerging anti-parasitic therapies is Host defence peptides (HDPs). Here we test the HDP BMAP-28 as an anti-leishmanial therapy against two lifecycle stages of Leishmania major, the promastigotes (insect infective form) and the intracellular amastigote (mammalian infective form). Two stereoisomers of BMAP-28, the D-amino acid form (D-BMAP-28) and the retro-inverso form (RI-BMAP-28), were also tested for anti-leishmanial activity. The BMAP-28 form (L-form) was susceptible to degradation by GP63, the metalloproteinase that covers the promastigotes cell surface. However, the BMAP-28 isomers, the D-form and RI-form were resistant, and therefore more potent against the promastigote parasite. Though other anti-leishmanial HDP studies focus on the promastigote form of the parasite, it is the mammalian infective form, the amastigote, which causes the disease symptoms. Here we demonstrate that BMAP-28 and its isomers D-BMAP-28 and RI-BMAP-28 are effective against the amastigote form of the parasite using a macrophage infection model. These findings show that BMAP-28 has excellent potential as a novel anti-leishmanial therapeutic.

Spotlight on Human LL-37, an Immunomodulatory Peptide with Promising Cell-Penetrating Properties

Cationic antimicrobial peptides are major components of innate immunity and help control the initial steps of the infectious process. They are expressed not only by immunocytes, but also by epithelial cells. They share an amphipathic secondary structure with a polar cationic site, which explains their tropism for prokaryote membranes and their hydrophobic site contributing to the destructuration of these membranes. LL-37 is the only cationic antimicrobial peptide derived from human cathelicidin. LL-37 can also cross the plasma membrane of eukaryotic cells, probably through special domains of this membrane called lipid rafts. This transfer could be beneficial in the context of vaccination: the activation of intracellular toll-like receptors by a complex formed between CpG oligonucleotides and LL-37 could conceivably play a major role in the building of a cellular immunity involving NK cells.

A study on the interactions of Aurein 2.5 with bacterial membranes

Aurein 2.5 (GLFDIVKKVVGAFGSL-NH(2)) is an uncharacterised antimicrobial peptide. At an air/water interface, it exhibited strong surface activity (maximal surface pressure 25mNm(-1)) and molecular areas consistent with the adoption of alpha-helical structure orientated either perpendicular (1.72nm(2)molecule(-1)) or parallel (3.6nm(2)molecule(-1)) to the interface. Aurein 2.5 was strongly antibacterial, exhibiting a minimum inhibitory concentration (MIC) of 30microM against Bacillus subtilis and Escherichia coli. The peptide induced maximal surface pressure changes of 9mNm(-1) and 5mNm(-1), respectively, in monolayers mimicking membranes of these organisms whilst compression isotherm analysis of these monolayers showed DeltaG(Mix)>0, indicating destabilisation by Aurein 2.5. These combined data suggested that toxicity of the peptide to these organisms may involve membrane invasion via the use of oblique orientated alpha-helical structure. The peptide induced strong, comparable maximal surface changes in monolayers of DOPG (7.5mNm(-1)) and DOPE monolayers (6mNm(-1)) suggesting that the membrane interactions of Aurein 2.5 were driven by amphiphilicity rather than electrostatic interaction. Based on these data, it was suggested that the differing ability of Aurein 2.5 to insert into membranes of B. subtilis and E. coli was probably related to membrane-based factors such as differences in lipid packing characteristics. The peptide was active against both sessile E. coli and Staphylococcus aureus with an MIC of 125microM. The broad-spectrum antibacterial activity and non-specific modes of membrane action used by Aurein 2.5 suggested use as an anti-biofilm agent such as in the decontamination of medical devices.

BMAP-28 improves the efficacy of vancomycin in rat models of gram-positive cocci ureteral stent infection

An experimental study was performed to evaluate the efficacy of BMAP-28 alone and in combination with vancomycin in animal models ureteral stent infection due to Enterococcus faecalis and Staphylococcus aureus. Study included a control group without bacterial challenge to evaluate the sterility of surgical procedure, a challenged control group that did not receive any antibiotic prophylaxis and for each bacterial strain three challenged groups that received (a) 10 mg/kg vancomycin intraperitoneally, immediately after stent implantation, (b) BMAP-28-coated ureteral stents where 0.2-cm(2) sterile ureteral stents were incubated in 1mg/l BMAP-28 solution for 30 min immediately before implantation and (c) intraperitoneal vancomycin plus BMAP-28-coated ureteral stent at the above concentrations. Experiments were performed in duplicate. Ureteral stents were explanted at day 5 following implantation and biofilm bacteria enumerated. Our data showed that rats that received intraperitoneal vancomycin showed the lowest bacterial numbers. BMAP-28 combined with vancomycin showed efficacies higher than that of each single compound. These results highlight the potential usefulness of this combination in preventing ureteral stent-associated in gram-positive infections.

Temporin A is effective in MRSA-infected wounds through bactericidal activity and acceleration of wound repair in a murine model

We investigated the effect of topical temporin A in the management of methicillin-resistant strain of Staphylococcus aureus (MRSA)-infected experimental surgical wounds in mice. The wound, cut through the panniculus carnosus of BALB/c mice, was inoculated with 5x10(7) colony-forming units of MRSA. Mice were treated with Allevyn, temporin A-soaked Allevyn, Allevyn and daily intraperitoneal teicoplanin (7mg/kg), temporin A-soaked Allevyn and daily intraperitoneal teicoplanin. Main outcome measurements were: quantitative bacterial culture, histological examination with assessment of micro-vessel density and of vascular endothelial growth factor (VEGF) expression in tissue sections, and VEGF plasma levels alike. Treatment with temporin-A associated with teicoplanin injection significantly reduced bacterial load to 0.85 x 10(1)+/-0.1 x 10(1)CFU/ml. Histological examination showed that infected mice receiving temporin A-soaked Allevyn (with or without teicoplanin) had a higher degree of granulation tissue formation and collagen deposition compared to the other treated groups. A significant increase in serum VEGF expression was observed in mice receiving temporin A topically and temporin A topically associated with intraperitoneal teicoplanin. In conclusion our results demonstrated that temporin A is effective in the management of infected wounds, by a significant bacterial growth inhibition and acceleration of wound repair process.

Research advances in the development of peptide antibiotics

Bacterial resistance to antibiotics is a growing concern in both nosocomial and community acquired infections. Resistance began to emerge as early as the 1950s. Much research has been dedicated to the improvement of existing classes of antibiotics. Antimicrobial peptides (AMPs) are part of the innate immune system, and an important component of immune defense. They are produced by plants, animals, insects, and single celled organisms, and possess anti-microbial properties. As such, they are an ideal target for future antibiotic production. Bacteriocins are a subgroup of AMPs, produced by various bacteria. It has been shown that the production of chimeric peptides consisting of bacteriocins and pheromones can be targeted toward the killing of specific bacterial species. In contrast to the clonal, acquired adaptive immunity, endogenous peptide antibiotics provide a fast and energy-effective mechanism as front line defense. This review will provide an overview of AMPs and their potential for target-specific anti-infective therapy.

The antimicrobial peptide tachyplesin III coated alone and in combination with intraperitoneal piperacillin-tazobactam prevents ureteral stent Pseudomonas infection in a rat subcutaneous pouch model

We investigated the efficacy of Tachyplesin III alone or combined with piperacillin-tazobactam (TZP) to prevent biofilm formation in vitro and in a rat model of Pseudomonas aeruginosa ureteral stent infection. We have observed that in vitro TZP, in presence of Tachyplesin III, showed minimal inhibitory concentrations (MIC)s twofold and minimal bactericidal concentrations (MBC)s eightfold lower. The in vivo study showed that rats that received intraperitoneal TZP showed the lowest bacterial numbers. Tachyplesin III combined with TZP showed efficacies higher than that of each single compound. Coating ureteral stents with Tachyplesin III is able to inhibit bacterial growth up to 1,000 times.

Cathelicidins and functional analogues as antisepsis molecules

The emergence of antibiotic-resistant bacteria together with the limited success of sepsis therapeutics has lead to an urgent need for the development of alternative strategies for the treatment of systemic inflammatory response syndrome and related disorders. Immunomodulatory compounds that do not target the pathogen directly (therefore limiting the development of pathogen resistance), and target multiple inflammatory mediators, are attractive candidates as novel therapeutics. Cationic host defence peptides such as cathelicidins have been demonstrated to be selectively immunomodulatory in that they can confer anti-infective immunity and modulate the inflammatory cascade through multiple points of intervention. The human cathelicidin LL-37, for example, has modest direct antimicrobial activity under physiological conditions, but has been demonstrated to have potent antiendotoxin activity in animal models, as well as the ability to resolve certain bacterial infections. A novel synthetic immunomodulatory peptide, IDR-1, built on this same theme has no direct antimicrobial activity, but is effective in restricting many types of infection, while limiting pro-inflammatory responses. The ability of these peptides to selectively suppress harmful pro-inflammatory responses, while maintaining beneficial infection-fighting components of host innate defences makes them a good model for antisepsis therapies that merit further investigation.

The lipopeptides Pal-Lys-Lys-NH(2) and Pal-Lys-Lys soaking alone and in combination with intraperitoneal vancomycin prevent vascular graft biofilm in a subcutaneous rat pouch model of staphylococcal infection

Staphylococcal infections are often associated with the use of implantable medical devices. Such infections are difficult to treat because of biofilm resistance to antibiotics and are common causes of morbidity and mortality. Graft infections were established in the back subcutaneous tissue of adult male Wistar rats by implantation of Dacron prostheses followed by topical inoculation with 2x10(7) colony-forming units of bacterial strains. The study included a control group, a contaminated group that did not receive any antibiotic prophylaxis and five contaminated groups that received intraperitoneal vancomycin, Pal-Lys-Lys-NH(2) and Pal-Lys-Lys-soacked graft, and vancomycin plus Pal-Lys-Lys-NH(2) or Pal-Lys-Lys-soacked graft, respectively. The infection was evaluated by using sonication and quantitative agar culture. Moreover, an in vitro antibiotic susceptibility assay for Staphylococcus aureus biofilms was performed to elucidate the same activity. When tested alone, vancomycin and lipopeptides showed comparable efficacies. All combinations showed efficacies significantly higher than that of each single compound. Vancomycin combined to Pal-Lys-Lys-NH(2) exerted the strongest anti-staphylococcal efficacies. The in vitro studies showed, that MIC and MBC values for vancomycin were lower in presence of lipopeptides. They reduce the bacterial load and to enhance the effect of vancomycin in the prevention of vascular graft staphylococcal infections.