Effect of HAF carbon black on curing, mechanical, thermal and neutron shielding properties of natural rubber - Low-density polyethylene composites

Starch consolidation of calcium carbonate as a tool to develop lightweight fillers for LDPE-based plastics

Calcium carbonate (CaCO3) is used as a filler to improve the stiffness and processability of plastics at low cost. However, its high density limits the quantity to be used. In this work, the feasibility of using starch consolidation of eggshells-derived CaCO3 (ES) to develop lightweight fillers for low density polyethylene (LDPE)-based materials was studied. Starch, recovered from potato by-products, was combined with ES, gelatinized, dried, and milled as a fine powder. The obtained ES/starch-based particles were then compounded with LDPE and their influence on chromatic, mechanical, morphological, and density properties of mold injected LDPE-based materials was studied. Commercially available CaCO3 (COM) was used as control. ES/starch particles were 18 times less dense than the commercially available CaCO3 (2.62 g cm-3). When incorporated into LDPE-based formulations, ES/starch originated brownish materials with lower density (1.18 g cm-3) and higher stiffness (542 MPa of Young's modulus) than those produced with the COM sample (1.33 g cm-3 of density; 221 MPa of Young's modulus). Therefore, starch consolidation of ES revealed to be a promising approach to develop lightweight fillers able to provide stiffness and color to LDPE-based plastics, while valorizing biomolecules-rich by-products.

A Review on the Thermal Characterisation of Natural and Hybrid Fiber Composites

The thermal stability of natural fiber composites is a relevant aspect to be considered since the processing temperature plays a critical role in the manufacturing process of composites. At higher temperatures, the natural fiber components (cellulose, hemicellulose, and lignin) start to degrade and their major properties (mechanical and thermal) change. Different methods are used in the literature to determine the thermal properties of natural fiber composites as well as to help to understand and determine their suitability for a certain applications (e.g., Thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and differential mechanical thermal analysis (DMA)). Weight loss percentage, the degradation temperature, glass transition temperature (T_g), and viscoelastic properties (storage modulus, loss modulus, and the damping factor) are the most common thermal properties determined by these methods. This paper provides an overview of the recent advances made regarding the thermal properties of natural and hybrid fiber composites in thermoset and thermoplastic polymeric matrices. First, the main factors that affect the thermal properties of natural and hybrid fiber composites (fiber and matrix type, the presence of fillers, fiber content and orientation, the treatment of the fibers, and manufacturing process) are briefly presented. Further, the methods used to determine the thermal properties of natural and hybrid composites are discussed. It is concluded that thermal analysis can provide useful information for the development of new materials and the optimization of the selection process of these materials for new applications. It is crucial to ensure that the natural fibers used in the composites can withstand the heat required during the fabrication process and retain their characteristics in service.