Preparation of PbO nanocrystals via decomposition of lead oxalate

Selective lead ion sensing via cotton pad-based Na2EDTA capped AuNPs: A smartphone-assisted colorimetric method

Herein, Na2EDTA-capped AuNPs specifically designed for selective smartphone-assisted colorimetric detection are synthesized and characterized. Na2EDTA-capped AuNPs was synthesized and characterized by UV-Visible spectroscopy, ATR, Raman, XRD, SEM and EDX. The calculated activation energy of the produced nanoparticles was 0.2 eV. Using XRD and SEM, the average crystallite size was found to be approximately 25 nm. Only Pb2+ and Cd2+, among the following metal ions: Mg2+, K+, Ca2+, Co2+, Ni2+, Ba2+, Hg+, Bi2+, Pb2+, and Cd2+, caused the AuNa2EDTA solution's hue to shift from reddish in color to blue. Pb2+ and Cd2+ were distinguished using a Na2S solution. Cotton pad with AuNa2EDTA integrated served as the substrate for metal ion adsorption. The GIMP software-supported smartphone was used to implement the color contrast (R) method. In the 10-2000 μM range, a straight line represented the relationship between 1/R and Pb2+ ion concentrations, with a limit of detection (LOD) of 0.28 μM was revealed. Real water sample collected from Rupsa River, Khulna, Bangladesh was tested by the developed colorimetric method to be 80 μM of Pb2+ ion. Combining the prevalence of smartphones and the potential of nanotechnology, a cotton-pad based platform functionalized with AuNa2EDTA may be a ground-breaking method for the detection of Pb2+ ions in various media.

Isolation and screening of phosphorus solubilizing bacteria from saline alkali soil and their potential for Pb pollution remediation

The high pH and salinity of saline alkali soil not only seriously restrict the growth of crops, but also aggravate the pollution of heavy metals. The fixation of heavy metals and the regulation of pH by phosphorus solubilizing microorganisms may become a new way to repair heavy mental and improve saline alkali soil. In this study, a saline-alkali resistant bacteria (CZ-B1, CGMCC No: 1.19458) was screened from saline-alkali soil, and its tolerance to salt/alkali/lead stress was investigated by shaking flask experiment. The strain was identified as Bacillus amyloliquefaciens by morphology and 16S rRNA gene sequence analysis. The optimum growth temperature of CZ-B1 is about 35°C-40℃. The maximum salt stress and pH that it can tolerance are 100 g/L and 9 respectively, and its tolerance to Pb²⁺ can reach 2000 mg/L. The phosphorus release amount of CZ-B1 to Ca₃(PO₄)₂ within 72 h is 91.00-102.73 mg/L. The phosphate solubilizing index in PVK agar medium and NBRIP agar medium are more than 2, which can be defined as phosphate solubilizing bacteria. Moreover, the dissolution of CZ-B1 to phosphorus is mainly attributed to tartaric acid, citric acid and succinic acid in inorganic medium. In addition, the removal rate of Pb²⁺ by CZ-B1 can reach 90.38% for 500 mg/L. This study found that CZ-B1 can immobilize Pb through three biological mechanisms (organic acid, extracellular polymers and mineralization reaction). The release of succinic acid (10.97 g/L) and citric acid (5.26 g/L) may be the main mechanism to promote the mineralization reaction of CZ-B1 (phosphate and oxalate) and resistance to Pb stress. In addition, the high enrichment of Pb²⁺ by EPS can increase the rate of extracellular electron transfer and accelerate the mineralization of CZ-B1. The screening and domestication of saline-tolerant phosphorus-solubilizing bacteria not only help to remediate Pb contamination in saline soils, but also can provide P element for plant growth in saline soil.

Comparing the effects of humic acid and oxalic acid on Pb(II) immobilization by a green synthesized nanocrystalline hydroxyapatite

Dissolved organic matter (DOM) is one of the most significant parameters to affect the remediation efficiency of Pb(II) by apatites. Numerous studies chose humic substances as a surrogate of DOM to investigate its influence on Pb(II) immobilization. However, the effect of low-molecular-weight organic acids such as oxalic acid (OA), which is ubiquitous in the environment and a primary component of DOM, in immobilizing Pb(II) was still not fully understood. Herein, humic acid (HA) and OA were examined to distinguish their influence on Pb(II) immobilization by a green synthesized nanocrystalline hydroxyapatite (nHAP). Various parameters were considered to evaluate the removal performance of nHAP towards Pb(II) as affected by HA/OA. Results indicated that Pb(II) immobilization was significantly promoted in the coexistence of OA owing to the precipitation of hydroxypyromorphite (HPY) as well as PbC₂O₄, but was independent on the addition sequence and slightly hindered by HA, disclosing that Pb(II) preferred to bind directly with nHAP instead of via HA. Characterization of the Pb(II) loaded solids by multiple technologies revealed that HPY was the predominant precipitate both in the absence and presence of HA, while the formation of PbC₂O₄ was preferred over that of HPY in the existence of OA. X-ray photoelectron spectroscopy indicated that PbC₂O₄ was the prevalent solid phase with the ratio of 62.97% after Pb(II) immobilization by nHAP in the presence of OA. These findings implied that the transformation efficiency of Pb(II) to HPY by apatites can be overestimated in the presence of OA due to the precipitation of PbC₂O₄.

Study of double-using ultrasonic effects on the structure of PbO nanorods fabricated by the sonochemical method

In this study, lead oxide (PbO) nanostructures are fabricated by an ultrasound-assisted sonochemical method, and re-ultrasonic effects on them are investigated. In the synthesis process, lead nitrate powder is used as a precursor, and potassium hydroxide serves as a precipitation agent. The resulting samples are characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), and Fourier transform-infrared spectroscopy (FT-IR). Re-ultrasound is also performed to terminate the growth of the PbO nanorods, stabilize them, and preserve their morphology. According to the XRD results, the re-ultrasonic effect did not change the crystal phases, and the tetragonal and orthorhombic crystal phases were preserved. The effect of the calcination time was investigated too; an increase in it led to a decrease in the irregular nanorods size but an increase in the crystallite size.

CuO/PbO Nanocomposite: Preparation and Catalysis for Ammonium Perchlorate Thermal Decomposition

In this present article, we reported a facile and efficient milling method to prepare a series of CuO/PbO nanocomposite metal oxides (CuO/PbO NMOs), with CuO/PbO molar ratios of 1:2, 1:1, 1:0.5, and 1:0.25 as a potential catalyst to catalyze the thermal decomposition of ammonium perchlorate (AP). The obtained CuO/PbO NMOs were systematically characterized. X-ray diffraction (XRD), X-ray energy-dispersive spectrometry (EDS) and X-ray photoelectron spectroscopy (XPS) analyses showed that the characteristic peaks of CuO/PbO NMOs were almost the superposition of nano CuO and nano PbO, while few new weak peaks were observed resulting from the lattice defects and new structural arrangements and chemical bonds between nano CuO and nano PbO during a high-energy grinding process. Scanning electron microscopy (SEM) and transition electron microscopy (TEM) observations exhibited that the particle sizes of the CuO/PbO NMOs were distributed in the range of 10-20 nm. Thermogravimetric (TG) analysis coupled with differential scanning calorimetric (DSC) techniques verified that CuO/PbO NMOs with a CuO/PbO molar ratio of 1:1 presented the best catalytic effect for AP thermal decomposition among the other CuO/PbO NMOs, as well as the single nano CuO and nano PbO. The outstanding catalytic performance is mainly reflected as follows: shifting the peak temperature of AP in high-temperature decomposition stages from 441.3 to 347.6 °C, increasing the decomposition heat of AP from 941 to 1711 J/g, and decreasing the Gibbs free energy of AP from 199.8 to 172.1 kJ/mol, supporting the existence of a synergistic catalytic effect between nano CuO and nano PbO.

Lignin-based dual component additives as effective electrode material for energy management systems

A functional PbO-lignin electrode hydrid material composite was designed and manufactured. Moreover, its connection efficiency was confirmed using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). We noted that the superficial layers of PbO combined with layers of the biopolymer and that oxygen atoms present in both materials had influence on the chemical environment of the neighboring compound. Hence, it can be said that the addition of PbO significantly contributes to the improvement of thermal stability of the final inorganic-organic system. In the framework of the study, the dispersive, morphological and structural characteristics were determined using scanning electron microscopy (SEM) and laser diffraction method. Electrochemical studies indicated that the PbO-lignin material exhibits better electrochemical properties compared to PbO without the addition of kraft lignin (increased capacitance, lower charge transfer resistance), as the specific capacitance after 5000 charge/discharge cycles was still at 95% of the initial value. Such promising operating parameters show that this material can be successfully used as an electrode material for energy management systems.

Ultrasonic-assisted synthesis of the nanostructures of a Co(II) metal organic framework as a highly sensitive fluorescence probe of phenol derivatives

Nanostructures of a metal-organic framework with chemical formula, [Co(BDC)(L*)]_n.DMF (TMU-40), BDC = 1,4-benzendicarboxylate, L* = 5,6-dipyridin-4-yl-1,2,3,4-tetrahydropyrazine, under ultrasonic irradiation at ambient temperature and atmospheric pressure were prepared and characterized by Fourier-transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). Sonication time, concentration of initial reagents and ultrasonic generator power effects on the size and morphology of nano-structured compounds were studied. TMU-40 (for Tarbiat Modares University) displayed a good potential as a luminescent sensor against phenol derivatives consist of phenol, 4-aminophenol, 4-methylphenol and 4-chlorophenol. Nano-sized TMU-40 showed the better sensing performance in comparison to its bulk phase. The nano TMU-40 displayed very selective and sensitive in detection of phenol derivatives. The detection limit amounts of 15 nM and 63 nM were achieved for 4-aminophenol in nano TMU-40 and bulk TMU-40, respectively. The special structure and fluorescent character of L* ligand and high surface area of nano MOF provide an effective interaction between MOF and phenolic analytes to selectively and sensitively detect of the analyte molecules.

Mineralization of aniline in aqueous solution by sono-activated peroxydisulfate enhanced with PbO semiconductor

Oxidative degradation of aniline in aqueous solution was performed by the sono-activated peroxydisulfate coupled with PbO process, wherein a dramatic synergistic effect was found. Experiments were carried out in the batch-wise mode to investigate the influence of various operation parameters on the sonocatalytic behavior, such as ultrasonic power intensity, peroxydisulfate anion concentrations and PbO dosages. According to the scavenging effect of ethanol, methanol and tert-butyl alcohol, the principal oxidizing agents were presumed to be sulfate radicals descended from peroxydisulfate anions, activated via ultrasound or sonocatalysis of PbO. Based on the results attained from gas chromatograph-mass spectrometer, it was hypothesized that aniline was initially oxidized into iminobenzene radicals, followed with formation of nitrosobenzene, p-benzoquinonimine and nitrobenzene respectively. Condensation of nitrosobenzene with aniline generated azobenzene. Phenol was detected as one of degradation intermediates, which was sequentially converted into hydroquinone and p-benzoquinone.

A novel synthesis of new antibacterial nanostructures based on Zn-MOF compound: design, characterization and a high performance application

In this study, the novel zinc metal-organic frameworks (MOF) nanostructure has been employed, which was developed using an affordable, environmental friendly, efficient and fast method of ultrasound-assisted reverse micelle (UARM). These nanostructures were identified with various techniques such as FT-IR, XRD, BET, SEM, TG-DSC, TEM and EDS. It was found that the Zn-MOF samples have favorable physicochemical properties. The impact of experimental parameters of the UARM method is effective on the resulting properties, such as high surface area of the products that increases the interactions between the Zn-MOF nanostructure and bacteria.Their antibacterial activities were investigated using diffusion methods in agar and also with dilutions of Zn-MOF samples. Antibiotics (tetracycline and ampicillin) and their anti-biofilm effects were evaluated using microplate method. Obtained results revealed that the Zn-MOF nanostructures have high antibacterial properties which, could be due to the nature of the applied Zn-MOF as well as the optimization process. The Zn- MOF nanostructures could be a novel antibacterial material as biocatalyst processes.

Nanoscale chemical and mechanical heterogeneity of human dentin characterized by AFM-IR and bimodal AFM

•

AFM-IR technique was used to detect the chemical heterogeneity of human dentin for the first time.

•

The heterogeneity of mechanical properties of human dentin was explored by AFM AM-FM technique.

•

A band at 1336 cm⁻¹ assigned to S Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]>O stretching vibrations was found only in peritubular dentin.

•

Peritubular dentin had a higher Young’s modulus (32.25 ± 4.67 GPa) than intertubular dentin.

•

AFM-IR and AFM AM-FM are useful for understanding the mineral deposition mechanisms of dentin.

Human dentin, as an important calcified tissue in the body, plays significant roles in withstanding masticatory forces and has a complex hierarchical organization. Understanding the composition and ultrastructure of dentin is critical for elucidating mechanisms of biomineralization under healthy and pathological states. Here, atomic force microscope infrared spectroscopy (AFM-IR) and AFM-based amplitude modulation-frequency modulation (AM-FM) techniques were utilized to detect the heterogeneity in chemical composition and mechanical properties between peritubular and intertubular dentin at the nanoscale. AFM-IR spectra collected from peritubular and intertubular dentin contained similar vibrational bands in the amide regions (I, II and III), suggesting that collagen may exist in both structures. A distinctive band at 1336 cm⁻¹ indicative of SO stretching vibrations was detected only in peritubular dentin. AFM-IR imaging showed an uneven distribution of chemical components at different locations, confirming the heterogeneity of dentin. The Young’s modulus of peritubular dentin was higher, and was associated to a higher mineral content. This study demonstrated distinctive chemical and mechanical properties of peritubular dentin, implying the different development and mineralization processes between peritubular and intertubular dentin. AFM-IR is useful to provide compositional information on the heterogeneity of human dentin, helping to understand the mineral deposition mechanisms of dentin.

Magnetic, Pseudocapacitive, and H2O2-Electrosensing Properties of Self-Assembled Superparamagnetic Co0.3Zn0.7Fe2O4 with Enhanced Saturation Magnetization

The present work explores the structural, microstructural, optical, magnetic, and hyperfine properties of Co0.3Zn0.7Fe2O4 microspheres, which have been synthesized by a novel template-free solvothermal method. Powder X-ray diffraction, electron microscopic, and Fourier transform infrared spectroscopic techniques were employed to thoroughly investigate the structural and microstructural properties of Co0.3Zn0.7Fe2O4 microspheres. The results revealed that the microspheres (average diameter ∼121 nm) have been formed by self-assembly of nanoparticles with an average particle size of ∼12 nm. UV-vis diffuse reflectance spectroscopic and photoluminescence studies have been performed to study the optical properties of the sample. The studies indicate that Co0.3Zn0.7Fe2O4 microspheres exhibit a lower band gap value and enhanced PL intensity compared to their nanoparticle counterpart. The outcomes of dc magnetic measurement and Mössbauer spectroscopic study confirm that the sample is ferrimagnetic in nature. The values of saturation magnetization are 76 and 116 emu g-1 at 300 and 5 K, respectively, which are substantially larger than its nanosized counterpart. The infield Mössbauer spectroscopic study and Rietveld analysis of the PXRD pattern reveal that Fe3+ ions have migrated from [B] to (A) sites resulting in the cation distribution: (Zn2+ 0.46Fe3+ 0.54)A[Zn2+ 0.24Co2+ 0.3Fe3+ 1.46]BO4. Comparison of electrochemical performance of the Co0.3Zn0.7Fe2O4 microspheres to that of the Co0.3Zn0.7Fe2O4 nanoparticles reveals that the former displays greater specific capacitance (149.13 F g-1) than the latter (80.06 F g-1) due to its self-assembled porous structure. Moreover, it was found that Co0.3Zn0.7Fe2O4 microspheres possess a better electrochemical response toward H2O2 sensing than Co0.3Zn0.7Fe2O4 nanoparticles in a wide linear range.

A novel heterometallic compound for design and study of electrical properties of silver nanoparticles-decorated lead compounds

A novel Ag-NPs decorated on hexagonal-like PbCO₃ was constructed with a novel heterometallic compound (AgPb(C₂O₄)(NO₃)) through thermal heating at 523 K.

Reduction of lead dioxide with oxalic acid to prepare lead oxide as the positive electrode material for lead acid batteries

Sponge-like lead oxides prepared from PbO₂can discharge a capacity of 115.2 mA h g⁻¹after 50 cycles at 100 mA g⁻¹.

Highly stable cycling of a lead oxide/copper nanocomposite as an anode material in lithium ion batteries

Nanostructure composites of PbO/Cu–C were synthesized byin situsolvothermal synthesis and heat treatment of PbO/Cu with PVP, used as lithium battery anodes. It exhibits >90% capacity retention after 9500 cycles at a current density of 5.5 A g⁻¹.

Recycling lead from spent lead pastes using oxalate and sodium oxalate and preparation of novel lead oxide for lead-acid batteries

A sustainable method, with minimal pollution and low energy cost in comparison with the conventional smelting method, is proposed for treating components of spent lead acid batteries with oxalate and sodium oxalate.

Preparation and characterization of nano-structured lead oxide from spent lead acid battery paste

As part of contribution for developing a green recycling process of spent lead acid battery, a nanostructural lead oxide was prepared under the present investigation in low temperature calcination of lead citrate powder. The lead citrate, the precursor for preparation of this lead oxide, was synthesized through leaching of spent lead acid battery paste in citric acid solution. Both lead citrate and oxide products were characterized by means of thermogravimetric-differential thermal analysis (TG-DTA), X-ray diffraction (XRD), and scanning electron microscope (SEM). The results showed that the lead citrate was sheet-shape crystal of Pb(C(6)H(6)O(7)) · H(2)O. When the citrate was calcined in N(2) gas, β-PbO in the orthorhombic phase was the main product containing small amount of Pb and C and it formed as spherical particles of 50-60 nm in diameter. On combusting the citrate in air at 370°C (for 20 min), a mixture of orthorhombic β-PbO, tetragonal α-PbO and Pb with the particle size of 100-200 nm was obtained, with β-PbO as the major product. The property of the nanostructural lead oxide was investigated by electrochemical technique, such as cyclic voltammetry (CV). The CV measurements presented the electrochemical redox potentials, with reversibility and cycle stability over 15 cycles.