Molecular precursor driven synthesis of phase pure tin sulfide nanosheets and investigation of their photoresponsive behaviour

Molecular precursor-mediated facile synthesis of phase pure metal-rich digenite (Cu1.8S) nanocrystals: an efficient anode for lithium-ion batteries

Copper sulfides have gained significant attention as alternative electrodes for rechargeable batteries. A simple and easily scalable synthetic pathway to access these materials is highly desirable. This paper describes the facile synthesis of metal-rich digenite Cu_1.8S nanocrystals from a structurally characterized new single-source molecular precursor in various high boiling solvents of varied polarity. The as-prepared nanostructures were thoroughly characterized by PXRD, Raman spectroscopy, EDS, XPS, electron microscopy techniques and diffuse reflectance spectroscopy to understand the crystal structure, phase purity, elemental composition, morphology and band gap. It was found that the reaction solvent has a profound role on their crystallite size, morphology and band gap, however the crystal structure and phase purity remained unaffected. Pristine Cu_1.8S nanostructures have been employed as an anode material in lithium-ion batteries (LIBs). The cell delivers a high initial charge capacity of ∼462 mA h g^-1 and retains a capacity of 240 mA h g^-1 even after 300 cycles at 0.1 A g^-1. DFT calculations revealed that multi-size polyhedron layers in the direction perpendicular to the two Li movement channels aid in the sustainable uptake of Li atoms with controlled volume expansion. The structure-mediated flexibility of the metal-rich Cu_1.8S lattice during lithiation permits high cyclability with reasonable retention of capacity.

Molecular precursor-mediated facile synthesis of photo-responsive stibnite Sb2S3 nanorods and tetrahedrite Cu12Sb4S13 nanocrystals

Stibnite Sb₂S₃ and tetrahedrite Cu₁₂Sb₄S₁₃ nanostructures being economical, environmentally benign and having a high absorption coefficient are highly promising materials for energy conversion applications. However, producing these materials especially tetrahedrite in the phase pure form is a challenging task. In this report we present a structurally characterized single source molecular precursor [Sb(4,6-Me₂pymS)₃] for the facile synthesis of binary Sb₂S₃ as well as ternary Cu₁₂Sb₄S₁₃ in oleylamine (OAm) at a relatively lower temperature. The as-prepared Sb₂S₃ and Cu₁₂Sb₄S₁₃ nanostructures were thoroughly checked for their phase purity, elemental composition and morphology by powder X-ray diffraction (pXRD), electron dispersive spectroscopy (EDS) and electron microscopy techniques. pXRD and EDS studies confirm the formation of phase pure, crystalline orthorhombic Sb₂S₃ and cubic Cu₁₂Sb₄S₁₃. The SEM, TEM and HRTEM images depict the formation of well-defined nanorods and nearly spherical nanocrystals for Sb₂S₃ and Cu₁₂Sb₄S₁₃, respectively. The Sb₂S₃ nanorods and Cu₁₂Sb₄S₁₃ nanocrystals exhibit an optical bandgap of ∼1.88 and 2.07 eV, respectively, which are slightly blue-shifted relative to their bulk bandgap, indicating the quantum confinement effect. Finally, efficient photoresponsivity and good photo-stability were achieved in the as-prepared Sb₂S₃ and Cu₁₂Sb₄S₁₃ nanostructure-based prototype photo-electrochemical cell, which make them promising candidates for alternative low-cost photon absorber materials.

Synthesis of photoresponsive and photoemissive ultrathin 2D nanosheets of In2S3 achieved through a new single source molecular precursor

Indium sulfide, a two-dimensional semiconductor material, has emerged as a promising candidate for cost-effective and sustainable solar cells. This report deals with the facile preparation of colloidal In₂S₃ with a new ultrathin nanosheet (NS) morphology. The synthesis was mediated through a new structurally characterized single source molecular precursor. The crystal structure, phase purity, and morphology of the NSs were thoroughly investigated by pXRD, Raman, XPS, and electron microscopic techniques. AFM studies revealed that the NSs have an average thickness of ∼1.76 nm. The optical studies confirm quantum confinement in the as-prepared NSs with a blue shift in the direct band gap, which lies in the optimal range suitable for solar cell application. Furthermore, photoluminescence studies indicate strong emission by these NSs in the blue region. The as-synthesized In₂S₃ NSs-based prototype photoelectrochemical cell exhibit high photostability and photoresponsivity, which make them suitable candidates for sustainable solar cells.

Quantum confined ultrathin nanosheets of In₂S₃ were synthesized from a new structurally characterized molecular precursor. The prototype photoelectrochemical cell based on the material exhibited high photostability and photoresponsivity.