Calorimetric and thermogravimetric studies of UV-irradiated polypropylene/starch-based materials aged in soil

Microbial strategies for degradation of microplastics generated from COVID-19 healthcare waste

COVID-19 pandemic has led to the generation of massive plastic wastes, comprising of onetime useable gloves, masks, tissues, and other personal protective equipment (PPE). Recommendations for the employ of single-use disposable masks made up of various polymeric materials like polyethylene, polyurethane, polyacrylonitrile, and polypropylene, polystyrene, can have significant aftermath on environmental, human as well as animal health. Improper disposal and handling of healthcare wastes and lack of proper management practices are creating serious health hazards and an extra challenge for the local authorities designated for management of solid waste. Most of the COVID-19 medical wastes generated are now being treated by incineration which generates microplastic particles (MPs), dioxin, furans, and various toxic metals, such as cadmium and lead. Moreover, natural degradation and mechanical abrasion of these wastes can lead to the generation of MPs which cause a serious health risk to living beings. It is a major threat to aquatic lives and gets into foods subsequently jeopardizing global food safety. Moreover, the presence of plastic is also considered a threat owing to the increased carbon emission and poses a profound danger to the global food chain. Degradation of MPs by axenic and mixed culture microorganisms, such as bacteria, fungi, microalgae etc. can be considered an eco-sustainable technique for the mitigation of the microplastic menace. This review primarily deals with the increase in microplastic pollution due to increased use of PPE along with different disinfection methods using chemicals, steam, microwave, autoclave, and incineration which are presently being employed for the treatment of COVID-19 pandemic-related wastes. The biological treatment of the MPs by diverse groups of fungi and bacteria can be an alternative option for the mitigation of microplastic wastes generated from COVID-19 healthcare waste.

The role of (bio)degradability on the management of petrochemical and bio-based plastic waste

In order to mitigate the social and ecological impacts of post-consumer plastic made of conventional petrochemical polymers, the market of (bio)degradable plastics have recently become more widespread. Although (bio)degradable plastics could be an environmentally friendly substitute of petrochemical ones, the consequences of their presence in the waste management system and in the environment (if not correctly disposed) are not always positive and plastic pollution is not automatically solved. Consequently, this work aims to review how plastic (bio)degradability affects the municipal solid waste management cycle. To this end, the state-of-the-art of the intrinsic (bio)degradability of conventional and unconventional petrochemical and bio-based polymers has been discussed, focusing on the environment related to the waste management system. Then, the focus was on strategies to improve polymer (bio)degradability: different types of eco-design and pre-treatment approach for plastics has been investigated, differently from other works that focused only on specific topics. The information gathered was used to discuss three typical disposal/treatment routes for plastic waste. Despite many of the proposed materials in eco-design have increased the plastics (bio)degradability and pre-treatments have showed interesting results, these achievements are not always positive in the current MSW management system. The effect on mechanical recycling is negative in several cases but the enhanced (bio)degradability can help the treatment with organic waste. On the other hand, the current waste treatment facility is not capable to manage this waste, leading to the incineration the most promising options. In this way, the consumption of raw materials will persist even by using (bio)degradable plastics, which strength the doubt if the solution of plastic pollution leads really on these materials. The review also highlighted the need for further research on this topic that is currently limited by the still scarce amount of (bio)degradable plastics in input to full-scale waste treatment plants.

Bioactive Propolis-Silane System as Antifungal Agent in Lignocellulosic-Polymer Composites

Polymer composites with renewable lignocellulosic fillers, despite their many advantages, are susceptible to biodegradation, which is a major limitation in terms of external applications. The work uses an innovative hybrid propolis-silane modifier in order to simultaneously increase the resistance to fungal attack, as well as to ensure good interfacial adhesion of the filler-polymer matrix. Polypropylene composites with 30% pine wood content were obtained by extrusion and pressing. The samples were exposed to the fungi: white-rot fungus Coriolus versicolor, brown-rot fungus Coniophora puteana, and soft-rot fungus Chaetomium globosum for 8 weeks. Additionally, biological tests of samples that had been previously exposed to UV radiation were carried out, which allowed the determination of the influence of both factors on the surface destruction of composite materials. The X-ray diffraction, attenuated total reflectance-Fourier transform infrared spectroscopy, and mycological studies showed a significant effect of the modification of the lignocellulose filler with propolis on increasing the resistance to fungi. Such composites were characterized by no changes in the supermolecular structure and slight changes in the intensity of the bands characteristic of polysaccharides and lignin. In the case of systems containing pine wood that had not been modified with propolis, significant changes in the crystalline structure of polymer composites were noted, indicating the progress of decay processes. Moreover, the modification of the propolis-silane hybrid system wood resulted in the inhibition of photo- and biodegradation of WPC materials, as evidenced only by a slight deterioration in selected strength parameters. The applied innovative modifying system can therefore act as both an effective and ecological UV stabilizer, as well as an antifungal agent.

REVIEW OF EVALUATION METHODS FOR BIODEGRADABILITY OF POLYMERIC MATERIALS

Development and further use of biodegradable polymeric materials requires prior assessment the degree of their biodegradation. There are a large number of methods developed taking into account the specifics of the destruction of polymeric materials. The purpose of this review is to systematize scientific and technical information regarding methods for assessing the biodegradation of polymeric materials. Laboratory methods of researches, including the following: influence of abiotic factors (temperature, moisture, UV irradiation), impact of microorganisms (fungi, bacteria, yeast), respiratory methods (Sturm, Zahn-Wellness, etc.), conditions of composting, enzyme analysis methods, ecotoxicity tests are given. Test methods in both aqueous and solid media are also presented. The parameters of biodegradability, which determine the degree of destruction (mass, strain strength, molecular weight distribution, temperature characteristics, macro-and microstructure of samples, etc.) or the composition and properties of the biological system in which biodegradation takes place (acidity, respiratory activity, chemical and microbiological composition of soil or other biological environment, etc.) are considered as well. Advantages of laboratory methods for studying the biodegradation of polymeric materials could be realized in the given directions: varying of the experimental conditions (temperature, humidity, UV and IR radiation, the presence of aggressive media, etc.), biochemical compositions of the environment; study of the ability of individual strains of microorganisms to dispose of polymer composites and targeted selection of the most active microbial associations (in particular, for the manufacture of special biocomposts); utilize of simple and fast methodical approaches and modern devices for evaluation experiments. However, laboratory methods do not always allow modeling a set of endogenous and exogenous factors that define the process of biodegradation in the natural environment. Therefore, this review also considers methods for assessing biodegradation in the environment. So, the essence of the test regarding the samples’ burial in the ground is given. International standards governing methods for assessing the biodegradability of organic substances and polymeric materials are summarized. Applying different test methods, one can evaluate the whole process of biodegradation of polymeric materials, consisting of several stages, which occur regardless the type of microorganisms and accompanying abiotic factors, and can be represented as follows: adhesion → colonization → biodeterioration → biofragmentation → assimilation → mineralization. Thus, the adhesion and colonization of microorganisms can be estimated by visual, bioindicator and spectral methods. Abiotic degradation and biodeterioration are associated with physical tests (e.g., thermal and physico-mechanical). Biofragmentation is detected by identifying fragments of lower molecular weight (i.e. by chromatographic methods). In turn, assimilation is assessed by the amount of metabolites produced using, for example, respirometric methods or involving analysis of microbial biomass (e.g., macroscopic and microscopic observations). The most productive should be considered a comprehensive approach to the study of biodegradation of polymers. To determine the reliable kinetic parameters and link the mechanism of this process, it is necessary to carry out a comparative analysis of the results of physical, chemical, microbiological experiments, which are carried out in both laboratory and natural conditions.

Microbial and Enzymatic Degradation of Synthetic Plastics

Synthetic plastics are pivotal in our current lifestyle and therefore, its accumulation is a major concern for environment and human health. Petroleum-derived (petro-)polymers such as polyethylene (PE), polyethylene terephthalate (PET), polyurethane (PU), polystyrene (PS), polypropylene (PP), and polyvinyl chloride (PVC) are extremely recalcitrant to natural biodegradation pathways. Some microorganisms with the ability to degrade petro-polymers under in vitro conditions have been isolated and characterized. In some cases, the enzymes expressed by these microbes have been cloned and sequenced. The rate of polymer biodegradation depends on several factors including chemical structures, molecular weights, and degrees of crystallinity. Polymers are large molecules having both regular crystals (crystalline region) and irregular groups (amorphous region), where the latter provides polymers with flexibility. Highly crystalline polymers like polyethylene (95%), are rigid with a low capacity to resist impacts. PET-based plastics possess a high degree of crystallinity (30-50%), which is one of the principal reasons for their low rate of microbial degradation, which is projected to take more than 50 years for complete degraded in the natural environment, and hundreds of years if discarded into the oceans, due to their lower temperature and oxygen availability. The enzymatic degradation occurs in two stages: adsorption of enzymes on the polymer surface, followed by hydro-peroxidation/hydrolysis of the bonds. The sources of plastic-degrading enzymes can be found in microorganisms from various environments as well as digestive intestine of some invertebrates. Microbial and enzymatic degradation of waste petro-plastics is a promising strategy for depolymerization of waste petro-plastics into polymer monomers for recycling, or to covert waste plastics into higher value bioproducts, such as biodegradable polymers via mineralization. The objective of this review is to outline the advances made in the microbial degradation of synthetic plastics and, overview the enzymes involved in biodegradation.

Effect of pro-oxidant concentration on characteristics of packaging films of cobalt stearate filled polypropylene

In this work, polypropylene (PP) filled with different proportions of CoSt were prepared in a twin-screw extruder by compounding technique. Eight films of these compounds were prepared using compression moulding. The modified PP films were characterized for chemical, physical, thermal, and morphological properties (before and after biodegradation). The biodegradation of the CoSt filled PP films was studied under controlled composting conditions, and the degradation intermediates were evaluated for their ecotoxicological impact. The CoSt present in the PP film was confirmed by Fourier transform infrared spectroscopy. As the addition of CoSt was progressively increased, the tensile strength and thermal stability decreased as shown by UTM and thermogravimetric analysis. The compounding of CoSt in PP reduced its crystallinity as revealed by the differential scanning calorimetry and X-ray diffraction analysis, and this led to enhanced degradation of PP. After biodegradation, SEM results of modified PP films showed rougher morphology than before biodegradation. The maximum biodegradation (19.78%) was shown by the film having 2 phr CoSt. The ecotoxicity tests of the degraded material, namely, microbial test, plant growth test, and earthworm acute-toxicity test demonstrated that the biodegradation intermediates were nontoxic. Hence, CoSt filled PP has high industrial potential to make biodegradable flexible packaging.

Thermal Response and Degressive Reaction Study of Oxo-Biodegradable Plastic Products Exposed to Various Degradation Media

In this work, three plastic film products commonly used as commodity thermoplastic articles were analysed with the aim of characterizing their thermal behaviour and stability. The test specimens were subjected to a series of analytical tests to confirm their biodegradable nature. The specimens ranged between 30 and 70 μm in thickness and showed high concentrations of regulated metals, namely, lead (Pb), postchemical analysis which can lead to its migration to natural sinks. The specimens were also exposed to degressive media, namely, accelerated (UV induced) weathering and soil burial field testing. The weight loss measured exceeded 58% after soil burial indicating deterioration under natural environmental stressors. In addition, the thermal characterization campaign executed with the aim of determining the product’s thermal response followed internationally recognised experimental protocols for the determination of thermal stability. The methodology used followed the International Confederation for Thermal Analysis and Calorimetry (ICTAC) recommendation for thermal stability and the computation of kinetic parameters. The degradation reaction kinetics were also determined postexposure to degressive media. Thermogravimetric analysis coupled with differential scanning calorimetry heat flow analysis and Fourier infrared spectroscopy results was also used in studying the degradation behaviour of the specimens. Analytical kinetic estimation methods relying on model free solutions enabled the determination of the apparent activation energy (Ea) of the specimens postexposure to degradation media. A shift in the degradation mechanism was also detected after studying the kinetic parameters which showed a range of Ea between 86.64 and 226.90 kJ mol-1 depending on the type of specimens and exposure media. It can be concluded that the oxo-biodegradable films are well suited for thermal treatment in the future as discarded plastic solid waste (PSW) articles. This work also paves the way for developing national standards and future plans for societies burdened with PSW accumulation.

Morphology, rheology and biodegradation of oxo-degradable polypropylene/polylactide blends

The blends of polypropylene (PP)/polylactide (PLA) with or without compatibilizer, and with pro-oxidant (cobalt stearate/calcium stearate) and pro-oxidant filled PP were prepared by using the melt blending technique. Films of these blends were prepared by compression molding. PP85PL15 and PP85PL15MA4 were the optimum blends from the tensile strength point of view. The improvement in the tensile strength of PP85PL15MA4 blend was achieved by addition of 4 phr compatibilizer. Cobalt stearate and calcium stearate were added separately to PP85PL15MA4 blend in 0.2% (w/w) ratio. The optimized blends were further characterized by differential scanning calorimetry, X-ray diffraction, rheological studies, scanning electron microscopy (SEM) and biodegradability test. Rheological studies confirmed the pseudo-plastic nature of all the blend samples. SEM studies have revealed that the addition of PLA in PP85PL15 enhances the void and roughness on the blend. All the prepared blends have biodegraded in the composting environment and the blend containing pro-oxidant biodegraded to the maximum extent.

Polymer biodegradation: mechanisms and estimation techniques

Within the frame of the sustainable development, new materials are being conceived in order to increase their biodegradability properties. Biodegradation is considered to take place throughout three stages: biodeterioration, biofragmentation and assimilation, without neglect the participation of abiotic factors. However, most of the techniques used by researchers in this area are inadequate to provide evidence of the final stage: assimilation. In this review, we describe the different stages of biodegradation and we state several techniques used by some authors working in this domain. Validate assimilation (including mineralisation) is an important aspect to guarantee the real biodegradability of items of consumption (in particular friendly environmental new materials). The aim of this review is to emphasise the importance of measure as well as possible, the last stage of the biodegradation, in order to certify the integration of new materials into the biogeochemical cycles. Finally, we give a perspective to use the natural labelling of stable isotopes in the environment, by means of a new methodology based on the isotopic fractionation to validate assimilation by microorganisms.

Evaluación de la degradación ambiental de materiales termoplásticos empleados en labores agrícolas en el cultivo de banano en Colombia

La producción de banano es una dinámica actividad económica en Colombia, sin embargo durante las labores agrícolas, las plantas deben ser unidas unas a otras a través de cuerdas. Esta prácticas contribuye a solventar el peso de los frutos antes de la cosecha. Cuerdas de polipropileno son utilizadas para este fin. Sin embargo, esta práctica genera problemas ambientales en las regiones de cultivo, haciendo necesario identificar materiales biodegradables alternativos. En este estudio, muestras de polipropileno, mezclas de polipropileno con almidón, así como un biopolímero conocido como Mater-Bi y éste combinado con PP fueron analizados. Su estabilidad fue evaluada al ser expuestas a las condiciones medioambientales de la región tropical de Urabá (Colombia). Los cambios en la estructura de los materiales expuestos fueron analizados utilizando calorimetría diferencial de barrido (DSC) y espectroscopía infrarroja FTIR. Pequeñas diferencias en el comportamiento mecánico y físico de las muestras expuestas fueron observadas, y pese a que la adición tanto del almidón como del biopolímero reducen el comportamiento a tracción del polipropileno, estas mezclas pueden ser útiles para esta aplicación.