Highly branched linear-comb random copolyesters of ε-caprolactone and δ-valerolactone: Isodimorphism, mechanical properties and enzymatic degradation behavior

Study of Polyethylene Oxide-b-Poly(ε-caprolactone-ran-δ-valerolactone) Amphiphilic Architectures and Their Effects on Self-Assembly as a Drug Carrier

Amphiphilic block copolymers with complex topologies (e.g., star and brush topologies) have attracted significant attention in drug delivery owing to their superior performance over linear micelles. However, their precise synthesis and structure-property relationships require further investigation. In this study, hydroxylated polybutadiene with adjustable topology and hydroxyl group density was employed as a macroinitiator to synthesize well-defined amphiphilic poly (ethylene oxide)-b-poly(ε-caprolactone-ran-δ-valerolactone) (PEO-b-P(CL-ran-VL)) copolymers via ring-opening polymerization (ROP). A series of linear, star, linear-comb, and star-comb copolymers were prepared as curcumin-loaded micellar carriers for the study. The self-assembly behavior, drug encapsulation efficiency, and in vitro release profiles of these copolymers in aqueous environments were systematically investigated. The results demonstrated that increasing the branch length of star-comb copolymers effectively reduced micelle size from 143 to 96 nm and enhanced drug encapsulation efficiency from 27.3% to 39.8%. Notably, the star-comb architecture exhibited 1.2-fold higher curcumin encapsulation efficiency than the linear counterparts. Furthermore, the optimized star-comb nanoparticles displayed sustained release kinetics (73.38% release over 15 days), outperforming conventional linear micelles. This study establishes a quantitative structure-property relationship between copolymer topology and drug delivery performance, providing a molecular design platform for programmable nanocarriers tailored to diverse therapeutic requirements of various diseases.

How the Aliphatic Glycol Chain Length Determines the Pseudoeutectic Composition in Biodegradable Isodimorphic poly(alkylene succinate-ran-caprolactone) Random Copolyesters

We synthesize four series of novel biodegradable poly(alkylene succinate-ran-caprolactone) random copolyesters using a two-step ring-opening/transesterification and polycondensation process with ε-caprolactone (PCL) as a common comonomer. The second comonomers are succinic acid derivatives, with variations in the number of methylene groups (nCH2) in the glycol segment, nCH2 = 2, 4, 8, and 12. The obtained copolyesters were poly(ethylene succinate-ran-PCL) (ESxCLy), poly(butylene succinate-ran-PCL) (BSxCLy), poly(octamethylene succinate-ran-PCL) (OSxCLy), and poly(dodecylene succinate-ran-PCL) (DSxCLy). We discovered a new mixed isodimorphic/comonomer exclusion crystallization in ESxCLy copolymers. The BSxCLy, OSxCLy, and DSxCLy copolymers display isodimorphic behavior. Our findings revealed a significant variation in the pseudoeutectic point position, from mixed isodimorphism/comonomer exclusion crystallization to isodimorphism with pseudoeutectic point variation from 54% to up to 90%. Moreover, we established a link between the melting temperature depression slope variation and the comonomer inclusion/exclusion balance, providing valuable insights into the complex topic of isodimorphic random copolymers.

Lipoic acid-based vitrimer-like elastomer

Dynamic covalent networks (DCNs) are materials that feature reversible bond formation and breaking, allowing for self-healing and recyclability. To speed up the bond exchange, significant amounts of catalyst are used, which creates safety concerns. To tackle this issue, we report the synthesis of a lipoic acid-based vitrimer-like elastomer (LAVE) by combining (i) ring-opening polymerization (ROP) of lactones, (ii) lipoic acid modification of polylactones, and (iii) UV crosslinking. The melting temperature (Tm) of LAVE is below room temperature, which ensures the elastic properties of LAVE at service temperature. By carefully altering the network, it is possible to tune the Tm, as well as the mechanical strength and stretchability of the material. An increase in polylactone chain length in LAVE was found to increase strain at break from 25% to 180% and stress at break from 0.34 to 1.41 MPa. The material showed excellent network stability under cyclic strain loading, with no apparent hysteresis. The introduction of disulfide bonds allows the material to self-heal under UV exposure, extending its shelf life. Overall, this work presents an environmentally friendly approach for producing a sustainable elastomer that has potential for use in applications such as intelligent robots, smart wearable technology, and human-machine interfaces.

Scalable and Degradable Dextrin-Based Elastomers for Wearable Touch Sensing

Elastomer-based wearables can improve people's lives; however, frictional wear caused by manipulation may pose significant concerns regarding their durability and sustainability. To address the aforementioned issue, a new class of advanced scalable supersoft elastic transparent material (ASSETm) is reported, which offers a unique combination of scalability (20 g scale), stretchability (up to 235%), and enzymatic degradability (up to 65% in 30 days). The key feature of our design is to render native dextrin hydrophobic, which turns it into a macroinitiator for bulk ring-opening polymerization. Based on ASSETm, a self-powered touch sensor (ASSETm-TS) for touch sensing and non-contact approaching detection, possessing excellent electrical potential (up to 65 V) and rapid response time (60 ms), is fabricated. This work is a step toward developing sustainable soft electronic systems, and ASSETm's tunability enables further improvement of electrical outputs, enhancing human-interactive applications.

The Relationship between Microstructure and Mechanical Properties of PBST Two-Component Crystalline Random Copolymers with Different BT Contents

The mechanical properties of two-component crystalline random copolymers are primarily based on their microstructure. At the same time, the influence of the composition on the crystallization behavior and crystal structure of these materials is also well known. Thus, in this study, a poly (butylene succinate-co-butylene terephthalate) random copolymer (PBST) with different molar ratios of butylene terephthalate (BT) was prepared. A systematic analysis of the crystallization behavior, crystal structure, and mechanical properties of PBST with different BT contents was carried out using WAXD, SAXS, and DSC analyses. The investigations showed that PBST-37.5 containing 37.5 mol% of BT content had the lowest strength and highest elasticity among the different compositions. This was because the two-component crystallization of poly (butylene terephthalate) (PBT) and poly (butylene succinate) (PBS) was greatly inhibited at the corresponding BT composition and the crystal growth was the least perfect, imparting poor strength to the PBT-37.5. Alternately, when the content of BT was 32.5 mol% in the PBST, the PBS segment could crystallize, and both PBT and PBS crystals were formed in the PBST-32.5. Thus, PBST-32.5 showed a higher material hardness than PBST-37.5. In contrast, when the BT content was greater than 37.5 mol% in the PBST, only PBT crystals existed in the PBST copolymer. Further, as the BT content increased, the crystal size of PBT gradually increased, which led to a closer packing of the crystal arrangement, increasing the crystallinity. This led to a gradual increase in the strength of the PBST material and a gradual decrease in its elasticity.

Lead calix[n]arenes (n = 4, 6, 8): structures and ring opening homo-/co-polymerization capability for cyclic esters

Reaction of [LiPb(OiPr)₃]₂ (generated in situ) with either p-tert-butylcalix[4]areneH₄ (L⁴H₄) or p-tert-butylcalix[6]areneH₆ (L⁶H₆) resulted in the heterometallic lithium/lead complexes [Pb₄Li₂(L⁴)₄H₆(MeCN)₃]·4.5MeCN (1·4.5MeCN) and [Pb₈Li₁₀Cl₂(L⁶H₂)₃(L⁶)(OH)₂(O)₂(H₂O)₂(MeCN)₄]·14MeCN (2·14MeCN), respectively. Use of the dimethyleneoxa-bridged p-tert-butyltetrahomodioxacalix[6]areneH₆ (L^6'H₆) with five equivalents of [Pb(OiPr)₂] afforded [Pb₁₃(L^6')₃O₄(iPrOH)]·11MeCN (3·11MeCN). Use of the larger p-tert-butylcalix[8]areneH₈ (L⁸H₈) with [Pb(OtBu)₂] or {Pb[N(TMS)₂]} (TMS = SiMe₃) afforded the products [Pb₁₂(L⁸)₂O₄]·8.7C₇H₈ (4·8.7C₇H₈) or [Pb₆(SiMe₃)₂(L⁸)O₂Cl₂] (5), respectively. Reaction of {Pb[N(TMS)₂]} (generated in situ from (Me₃Si)₂NH, nBuLi and PbCl₂) with L⁶H₆ afforded, after work-up (MeCN), the mixed-metal complex [Pb₁₀Li₂(L⁶)₂(OH)Cl(O)₄]·9.5MeCN (6·9.5MeCN). Reaction of distilled {Pb[N(TMS)₂]} (six equivalents) with L⁸H₈ resulted in the complex [Pb₁₂(L⁸)₂O₄]·12MeCN (7·12MeCN). Complexes 1-7, Pb(OiPr)₂ and [Pb(N(TMS)₂)₂] have been screened for their potential to act as pre-catalysts in the ring opening polymerization (ROP) of ε-caprolactone (ε-CL) and δ-valerolactone (δ-VL) and the copolymerization thereof. Generally, the lithiated complexes 1 and 2 exhibited better activities than the other pre-catalysts screened herein. For ε-CL and δ-VL, moderate activity at 130 °C over 24 h was observed for 1-7. In the case of the co-polymerization of ε-CL with δ-VL, 1-7, Pb(OiPr)₂ and [Pb(N(TMS)₂)₂] afforded reasonable conversions and high molecular weight polymers. The systems 1-7, Pb(OiPr)₂ and [Pb(N(TMS)₂)₂] also proved to be active in the ROP of the rac-lactide (r-LA); the activity trend was found to be 1 > 2 ≈ Pb(OiPr)₂ ≈ [Pb(N(TMS)₂)₂] > 4 > 5 ≈ 6 ≈ 7 > 3.

Vanadium complexes derived from oxacalix[6]arenes: structural studies and use in the ring opening homo-/co-polymerization of ε-caprolactone/δ-valerolactone and ethylene polymerization

Oxacalix[6]arene vanadium complexes have been employed for the ROP of cyclic esters and ethylene polymerization.

Ring-opening copolymerization of ε-caprolactone and δ-valerolactone by a titanium-based metal–organic framework

Copolymerization of ε-caprolactone and δ-valerolactone without any co-catalyst in a solvent-free medium under eco-friendly conditions using earth abundant Ti-metal based MOF, MIL-125.

INSIGHTS into the structures adopted by titanocalix[6 and 8]arenes and their use in the ring opening polymerization of cyclic esters

Interaction of p-tert-butylcalix[6]areneH6, L1H6, with [TiCl4] afforded the complex [Ti2Cl3(MeCN)2(OH2)(L1H)][Ti2Cl3(MeCN)3(L1H)]·4.5MeCN (1·4.5MeCN), in which two pseudo-octahedral titanium centres are bound to one calix[6]arene. A similar reaction but employing THF resulted in the THF ring-opened product [Ti4Cl2(μ3-O)2(NCMe)2(L)2(O(CH2)4Cl)2]·4MeCN (2·4MeCN), where LH4 = p-tert-butylcalix[4]areneH4. Interaction of L1H6 with [TiF4] (3 equiv.) led, after work-up, to the complex [(TiF)2(μ-F)L1H]2·6.5MeCN (3·6.5MeCN). Treatment of p-tert-butylcalix[8]areneH8, L2H8, with [TiCl4] led to the isolation of the complex [(TiCl)2(TiClNCMe)2(μ3-O)2(L2)]·1.5MeCN (4·1.5MeCN). From a similar reaction, a co-crystallized complex [Ti4O2Cl4(MeCN)2(L2)][Ti3Cl6(MeCN)5(OH2)(L2H2)]·H2O·11MeCN (5·H2O 11MeCN) was isolated. Extension of the L2H8 chemistry to [TiBr4] afforded, depending on the stoichiometry, the complexes [(TiBr)2(TiBrNCMe)2(μ3-O)2(L2)]·6MeCN (6·6MeCN) or [[Ti(NCMe)2Br]2[Ti(O)Br2(NCMe)](L2)]·7.5MeCN (7·7.5MeCN), whilst use of [TiF4] afforded complexes containing Ca2+ and Na+, thought to originate from drying agents, namely [Ti8CaF20(OH2)Na2(MeCN)4(L2)2]·14MeCN (8·14MeCN), [Na(MeCN)2][Ti8CaF20NaO16(L2)2]·7MeCN (9·7MeCN) or [Na]6[Ti8F20Na(MeCN)2(L2)][Ti8F20Na(MeCN)0.5(L2)]·15.5(C2H3N) (10·15.5MeCN). In the case of [TiI4], the ladder [(TiI)2(TiINCMe)2(μ3-O)2(L2)]·7.25CH2Cl2 (11·7.25CH2Cl2) was isolated. These complexes have been screened for their potential to act as catalysts in the ring opening polymerization (ROP) of ε-caprolactone (ε-CL), δ-valerolactone (δ-VL) and rac-lactide (r-LA), both in air and N2. For ε-CL and δ-VL, moderate activity at 130 °C over 24 h was observed for 1, 9 and 11; for r-LA, only 1 exhibited reasonable activity. In the case of the co-polymerization of ε-CL with δ-VL, the complexes 1 and 11 afforded reasonable conversions and low molecular weight polymers, whilst 4, 6, and 9 were less effective. None of the complexes proved to be active in the co-polymerization of ε-CL and r-LA under the conditions employed herein.

Use of titanocalix[4]arenes in the ring opening polymerization of cyclic esters

Titanocalix[4]arenes are shown to be active for the ROP of cyclic esters under N₂ or air with the mono-methoxy complex [Ti(NCMe)Cl(p-tert-butylcalix[4]arene(O)₃(OMe))] performing best.

Synthesis, microstructure and mechanical properties of partially biobased biodegradable poly(ethylene brassylate-co-ε-caprolactone) copolyesters

High-molecular-weight poly(ethylene brassylate-co-ε-caprolactone) copolyesters within a wide composition range were prepared via triphenyl bismuth catalyzed copolymerization of ethylene brassylate (EB) and ε-caprolactone (ε-CL) in bulk. Microstructural analysis of the resulting copolyesters demonstrated that the comonomer units were completely random distribution. DSC and WAXD recognized that the copolyesters cocrystallize within the lattices analogous to either of the parent homopolymers. It confirmed the isodimorphism behavior with a pseudo-eutectic point of melting temperatures as well as lattice spacings at 75 mol% ε-CL units. The crystal cell would be stretched in one dimension rather than expanding in both dimensions with the incorporation of comonomer units according to the result of WAXD. The mechanical properties of the copolyesters are well tunable by the composition, and its trend is consistent with the isodimorphism behavior, in particular, the maximum elongation at break over 2000% is located at the pseudo-eutectic point. The intralamellar shear occurred at the low tensile rate while both intralamellar shear and interlamellar shear occurred at high tensile rate. The copolymers exhibit excellent hydrolytic stability.