Effect of clay type on morphology and thermal stability of PMMA–clay nanocomposites prepared by heterocoagulation method

Structured clay minerals-based nanomaterials for sustainable photo/thermal carbon dioxide conversion to cleaner fuels: A critical review

In efforts to achieve a sustainable development goal, the utilization of CO₂ to generate renewable fuels is promising, as it is a sustainable technology that provides affordable and clean energy. To realize the production of renewable green fuels, a proficient and low-cost technology is required. Using photo/thermal catalytic process, the goal of sustainable CO₂ hydrogenation can be achieved. There have been several types of catalysts under exploration, however, they are expensive with limited availability. In the current development, green materials such as mineral clays are emerging as cocatalyst/supports for CO₂ hydrogenation. Clays are bestowed with various beneficial properties such as a large surface area, high porosity, abundant basic sites, excellent thermal stability and chemical corrosion resistance. Clays are promising materials that can drastically reduce the cost in catalyst preparation, partially fulfil the energy demand and reduce greenhouse gas emission. This review aims to focus on the various types of clays and their applications in the field of photo/thermal CO₂ hydrogenation to renewable fuels. Firstly, the classifications of clays are provided, whereby they can be differentiated based on their silicate layers, namely 1:1 and 2:1 type clay and their properties are thoroughly discussed to provide advantages and applications. The applications of various clays such as kaolinite, halloysite, montmorillonite, attapulgite, saponite and volkonskoite for CO₂ hydrogenation reactions are systematically discoursed. In addition, various approaches to improve the capability of raw clays as catalyst support are critically discussed, which include thermal treatment, exfoliation, acid-leaching and pillaring approaches. A critical discussion regarding the engineering aspects to further enhance clay-based catalyst for CO₂ hydrogenation are further disclosed. In short, clays are freely available materials that can be found in abundance. However, there are many more different types of natural green clays that have not been studied and explored in various energy applications.

The effects on antioxidant enzymes of PMMA/hydroxyapatite nanocomposites/composites

In this study, polymer-ceramic nanocomposites and/or composites were prepared by solution removal method using poly(methylmethacrylat) (PMMA) and nano-hydroxyapatite (nHA). They were characterized using X-ray diffraction (XRD), Fourier transform infrared-attenuated total reflection spectroscopy (FTIR-ATR), and differential thermal analysis/thermogravimetry (DTA/TG). Their effects and biocompatibilities on antioxidant enzymes were also investigated in detail. It has been shown that nHA was dramatically dispersed at nanoscale in the polymer matrix. The interaction occurred between OH groups of nHA and carbonyl groups of polymer and introduction of ceramic into the polymer matrix generally resulted in an increase in thermal stability. Nanocomposites and composites had different effects on enzyme activities. Samples synthesized in acetone increased enzyme activities for glutathione reductase (GR) and glucose-6 phosphate dehydrogenase (G6PD) enzymes, while inhibiting glutathione peroxidase (GPx) and catalase (CAT) enzyme activities. On the other hand, samples synthesized in tetrahydrofuran (THF) exhibited inhibitory behavior for G6PD and CAT enzymes. The samples synthesized in different media did not show any regularity on enzyme activities. The nanocomposites and/or composites prepared in acetone media were better hemocompatible than those in THF.

Depolymerization of waste poly(methyl methacrylate) scraps and purification of depolymerized products

A big challenge for the civilization in energy saving/waste management can be "the regeneration of monomers from the waste plastics followed by their re-polymerization" using an ideal recycling method. Herein, we investigate the thermal depolymerization of poly(methyl methacrylate) (PMMA) using thermogravimetric analysis coupled with mass spectrometry (TGA-MS). In this process, the polymer chains were decomposed to methyl methacrylate (MMA) in high yield and the degradation species were thoroughly characterized. The obtained MMA contained traces of byproducts. Firstly, the byproducts were found to be nonpolymerizable, secondly, their presence interrupt the polymerization reaction, and thirdly, they reduce the quality of re-polymerized PMMA (r-PMMA). This study reclaims that besides the main byproduct (methyl isobutyrate), traces of methyl pyruvate and 2,3-butanedione were also formed during the thermal depolymerization of PMMA. The formed 2,3-butanedione was found to be responsible for the unpleasant smell in the recovered MMA that also found itself in the r-PMMA. Further, the generated byproducts were eliminated from the r-PMMA by a dissolution/re-precipitation method. The structural characterizations of the recycled and purified PMMA were carried out by Fourier-transform-infrared spectroscopy (FT-IR), Hydrogen-1 (¹H)- and Carbon-13 (¹³C)-nuclear magnetic resonance (NMR), differential scanning calorimetry (DSC) and gel permeation chromatography (GPC). The chemical properties of the r-PMMA and purified PMMA proved to be similar to that of the virgin commercial PMMA. This study can provide an effective and practical prototype for the recycling of waste PMMA scraps and thus reduction in pollution caused by the landfilling of waste PMMA scraps.

Hysteresis-Free Carbon Nanotube Field-Effect Transistors

While carbon nanotube (CNT) field-effect transistors (CNFETs) promise high-performance and energy-efficient digital systems, large hysteresis degrades these potential CNFET benefits. As hysteresis is caused by traps surrounding the CNTs, previous works have shown that clean interfaces that are free of traps are important to minimize hysteresis. Our previous findings on the sources and physics of hysteresis in CNFETs enabled us to understand the influence of gate dielectric scaling on hysteresis. To begin with, we validate through simulations how scaling the gate dielectric thickness results in greater-than-expected benefits in reducing hysteresis. Leveraging this insight, we experimentally demonstrate reducing hysteresis to <0.5% of the gate-source voltage sweep range using a very large-scale integration compatible and solid-state technology, simply by fabricating CNFETs with a thin effective oxide thickness of 1.6 nm. However, even with negligible hysteresis, large subthreshold swing is still observed in the CNFETs with multiple CNTs per transistor. We show that the cause of large subthreshold swing is due to threshold voltage variation between individual CNTs. We also show that the source of this threshold voltage variation is not explained solely by variations in CNT diameters (as is often ascribed). Rather, other factors unrelated to the CNTs themselves (i.e., process variations, random fixed charges at interfaces) are a significant factor in CNT threshold voltage variations and thus need to be further improved.

Highly ductile UV-shielding polymer composites with boron nitride nanospheres as fillers

Polymer composites with enhanced mechanical, thermal or optical performance usually suffer from poor ductility induced by confined mobility of polymer chains. Herein, highly ductile UV-shielding polymer composites are successfully fabricated. Boron nitride (BN) materials, with a wide band gap of around ∼6.0 eV, are used as fillers to achieve the remarkably improved UV-shielding performance of a polymer matrix. In addition, it is found that spherical morphology BN as a filler can keep the excellent ductility of the composites. For a comparison, it is demonstrated that traditional fillers, including conventional BN powders can achieve the similar UV-shielding performance but dramatically decrease the composite ductility. The mechanism behind this phenomenon is believed to be lubricant effects of BN nanospheres for sliding of polymer chains, which is in consistent with the thermal analyses. This study provides a new design to fabricate UV-shielding composite films with well-preserved ductility.