Crystallization, spherulite growth, and structure of blends of crystalline and amorphous poly(lactide)s

Temperature-Enhanced Ordering in Plate-like Semicrystalline Block Copolymer Single-Crystal Suspensions Studied by Real-Time SAXS/WAXS

Self-assembly of hard platelet colloids into liquid crystalline phases is typically driven by entropy, making them less sensitive to temperature changes. However, soft interaction potentials often exist in real colloidal systems, which can lead to temperature-sensitive phase transitions. Despite significant progress in understanding phase behavior in the past 2 decades, studies on temperature-dependent phase behavior remain rare, and there is limited knowledge about how soft interactions influence phase transitions upon temperature changes. In this work, we investigated a platelet colloid system in isotropic and nematic phases using small- and wide-angle X-ray scattering techniques (SAXS/WAXS) and polarized optical microscopy (POM). The system consisted of polystyrene-block-poly(l-lactide) (PS-b-PLLA) block copolymer single crystals (BCSCs) with varying sizes dispersed in p-xylene. These crystals were truncated lozenge-shaped with effective diameters of 500 and 1000 nm and a uniform dry thickness of 18.0 nm. The ordering behaviors of BCSC500 in the isotropic phase and BCSC1000 in the N phase were monitored through SAXS/WAXS during heating, quenching, self-seeding, crystal growth, and final quenching. Enhanced ordering, specifically face-to-face correlation, was observed during heating prior to crystal melting. For BCSC500, ordering emerged at 105 °C during heating. In the case of BCSC1000 in the N phase, ordering was enhanced with increased heating and reached up to the ninth order of correlation peaks, indicating the formation of lamellar domains within the N phase. After seeding and crystal growth, both systems exhibited ordering. However, during the final cooling to room temperature, ordering disappeared for BCSC500 but persisted for BCSC1000. POM observations revealed that for both systems, initial heating resulted in a decrease in overall brightness; however, enhanced nematic domains or tactoids emerged prior to melting. Subsequent thermal treatments did not induce noticeable changes in the observed order. While both techniques revealed increased order, discrepancies were noted. SAXS indicated intensified short-range correlations, while POM showed the formation of local nematic domains or tactoids. We propose three distinct ordering regimes to reconcile these observations: large-scale nematic order, enhanced short-range order, and short-range clusters. We attributed the temperature-enhanced ordering phenomenon to lateral interactions between the BCSCs, annealing, and memory effects during melting and crystallization.

Hybrid interpenetrating network of polyester coronary stent with tunable biodegradation and mechanical properties

Poly(l-lactide) (PLLA) is an important candidate raw material of the next-generation biodegradable stent for percutaneous coronary intervention, yet how to make a polyester stent with sufficient mechanical strength and relatively fast biodegradation gets to be a dilemma. Herein, we put forward a hybrid interpenetrating network (H-IPN) strategy to resolve this dilemma. As such, we synthesize a multi-functional biodegradable macromer of star-like poly(d,l-lactide-co-ɛ-caprolactone) with six acrylate end groups, and photoinitiate it, after mixing with linear PLLA homopolymer, to trigger the free radical polymerization. The resultant crosslinked polymer blend is different from the classic semi-interpenetrating network, and partial chemical crosslinking occurs between the linear polymer and the macromer network. Combined with the tube blow molding and the postprocessing laser cutting, we fabricate a semi-crosslinked-polyester biodegradable coronary stent composed of H-IPN, which includes a physical network of polyester spherulites and a chemical crosslinking network of copolyester macromers and a part of homopolymers. Compared with the currently main-stream PLLA stent in research, this H-IPN stent realizes a higher and more appropriate biodegradation rate while maintaining sufficient radial strength. A series of polymer chemistry, polymer physics, polymer processing, and in vitro and in vivo biological assessments of medical devices have been made to examine the H-IPN material. The interventional implanting of the H-IPN stent into aorta abdominalis of rabbits and the follow-ups to 12 months have confirmed the safety and effectiveness.

A Review on Fully Bio-Based Materials Development from Polylactide and Cellulose Nanowhiskers

This review covers the development of eco-friendly, bio-based materials based on polylactide (PLA) and cellulose nanowhiskers (CNWs). As a biodegradable polymer, PLA is one of the promising materials to replace petroleum-based polymers. In the field of nanocomposites, CNWs offer many advantages; they are made from renewable resources and exhibit beneficial mechanical and thermal properties in combination with polymer matrix. A wide range of surface modifications has been done to improve the miscibility of CNW with the PLA homopolymer, which generally gives rise to hydrophobic properties. PLA–CNW nanocomposite materials are fully degradable and sustainable and also offer improved mechanical and thermal properties. Limitations pertaining to the miscibility of CNWs with PLA were solved through surface modification and chemical grafting on the CNW surfaces. Further development has been done by combining PLA-based material via stereocomplexation approaches in the presence of CNW particles, known as bio-stereo-nanocomposite PLA–CNW. The combination of stereocomplex crystalline structures in the presence of well-distributed CNW particles produces synergetic effects that enhance the mechanical and thermal properties, including stereocomplex memory (melt stability). The bio-based materials from PLA and CNWs may serve as eco-friendly materials owing to their sustainability (obtained from renewable resources), biodegradability, and tunability properties.

Effect of Cellulose and Cellulose Nanocrystal Contents on the Biodegradation, under Composting Conditions, of Hierarchical PLA Biocomposites

In this work, the effect of microfibrillated cellulose (MFC) and cellulose nanocrystals (CNCs) on the biodegradation, under composting conditions, of hierarchical PLA biocomposites (HBCs) was studied using a full 2² factorial experimental design. The HBCs were prepared by extrusion processing and were composted for 180 days. At certain time intervals, the specimens were removed from the compost for their chemical, thermal and morphological characterizations. An ANOVA analysis was carried out at different composting times to study MFC and CNCs’ effects on biodegradation. The specimen’s mass loss and molecular weight loss were selected as independent variables. The results show that the presence of MFC enhances the PLA biodegradation, while with CNCs it decreases. However, when both cellulosic fibers are present, a synergistic effect was evident—i.e., in the presence of the MFC, the inclusion of the CNCs accelerates the HBCs biodegradation. Analysis of the ANOVA results confirms the relevance of the synergistic role between both cellulosic fibers over the HBC biodegradation under composting conditions. The results also suggest that during the first 90 days of incubation, the hydrolytic PLA degradation prevails, whereas, beyond that, the enzymatic microbial biodegradation dominates. The SEM results show MFC’s presence enhances the surface biodeterioration to a greater extent than the CNCs and that their simultaneous presence enhances PLA biodegradation. The SEM results also indicate that the biodegradation process begins from hydrophilic cellulosic fibers and promotes PLA biodegradation.

Poly(lactic acid) (PLA) and polyhydroxyalkanoates (PHAs), green alternatives to petroleum-based plastics: a review

In spite of the fact that petroleum-based plastics are convenient in terms of fulfilling the performance requirements of many applications, they contribute significantly to a number of ecological and environmental problems. Recently, the public awareness of the negative effects of petroleum-based plastics on the environment has increased. The present utilization of natural resources cannot be sustained forever. Furthermore, oil is often subjected to price fluctuations and will eventually be depleted. The increase in the level of carbon dioxide due to the combustion of fossil fuel is causing global warming. Concerns about preservation of natural resources and climate change are considered worldwide motivations for academic and industrial researchers to reduce the consumption and dependence on fossil fuel. Therefore, bio-based polymers are moving towards becoming the favorable option to be utilized in polymer manufacturing, food packaging, and medical applications. This paper represents an overview of the feasibility of both Poly Lactic Acid (PLA) and polyhydroxyalkanoates (PHAs) as alternative materials that can replace petroleum-based polymers in a wide range of industrial applications. Physical, thermal, rheological, and mechanical properties of both polymers as well as their permeability and migration properties have been reviewed. Moreover, PLA's recyclability, sustainability, and environmental assessment have been also discussed. Finally, applications in which both polymers can replace petroleum-based plastics have been explored and provided.

Polyvinylidene Fluoride-Added Ceramic Powder Composite Near-Field Electrospinned Piezoelectric Fiber-Based Low-Frequency Dynamic Sensors

In this study, near-field electrospinning (NFES) is used to fabricate Ba x Sr1-x TiO3 (BST)/poly(vinylidene fluoride) (PVDF) piezoelectric fiber composites with excellent mechanical properties and chemical properties. BST ceramic powder is blended with PVDF solution uniformly to prepare a solution of appropriate conductance. The parameter for BST/PVDF fiber processing is based on PVDF fibers. Scanning electron microscopy, differential scanning calorimetry, microtensile testing, Fourier transform infrared spectroscopy, and electricity test of the blends of BST/PVDF fibers are incorporated. Mechanical properties of the fibers are then measured by microtensile testing. Effects of distinct ratios of Ba/Sr and the content of Ba0.7Sr0.3TiO3 ceramic powder on BST/PVDF piezoelectric fibers are discussed. Finally, BST/PVDF piezoelectric fiber composites are patterned on a poly(ethylene terephthalate) (PET)-based structure with an interdigital electrode as a BST/PVDF flexible energy harvester to capture ambient energy. The results show that the BST ceramic powder is ∼58-93 nm, and the diameters of piezoelectric fiber composites are ∼6.8-13.7 μm. The tensile strength of piezoelectric fiber composites is ∼74.92 MPa, and the Young's coefficient tensile strength is ∼3.74 GPa. Mechanical properties are 2-3 times higher than those of pure PVDF piezoelectric fibers. The maximum open-circuit voltage and closed-loop current of BST/PVDF fibers reached ∼1025 mV and ∼391 nA, respectively. The electromechanical energy conversion efficiency of the BST/PVDF energy harvester is found to be 1-2 times higher than that of the PVDF energy harvester. It is confirmed and validated that the addition of BST ceramic powder could effectively increase the piezoelectric constant of PVDF piezoelectric fibers.

Crystallization behavior, structure, morphology, and thermal properties of crystalline and amorphous stereo diblock copolymers, poly(l-lactide)-b-poly(dl-lactide)

Some fractions of poly(dl-lactide) chains were confined in the amorphous regions between the crystalline regions, but the remaining parts of the poly(dl-lactide) chains should have been located outside of the alternately layered crystalline and amorphous regions.

Stereocomplex-affected crystallization behaviour of PDLA in PDLA/PLDLA blends

In the presence of SC crystals, the spherulite growth rate of PDLA decreased, whereas its overall crystallization rate increased.

Nanopharmaceuticals for wound healing - Lost in translation?

Today, many of the newly developed pharmaceuticals and medical devices take advantage of nanotechnology and with a rising incidence of chronic diseases such as diabetes and cardiovascular disease, the number of patients afflicted globally with non-healing wounds is growing. This has created a requirement for improved therapies and wound care. However, converting the strategies applied in early research into new products is still challenging. Many of them fail to comply with the market requirements. This review discusses the legal and scientific challenges in the design of nanomedicines for wound healing. Are they lost in translation or is there a new generation of therapeutics in the pipeline?

Crystallization and Stereocomplexation of PLA-mb-PBS Multi-Block Copolymers

The crystallization and morphology of PLA-mb-PBS copolymers and their corresponding stereocomplexes were studied. The effect of flexible blocks (i.e., polybutylene succinate, PBS) on the crystallization of the copolymers and stereocomplex formation were investigated using polarized light optical microscopy (PLOM), differential scanning calorimetry (DSC), infrared spectroscopy (FTIR), and carbon-13 nuclear magnetic resonance spectroscopy (¹³C-NMR). The PLA and PBS multiple blocks were miscible in the melt and in the glassy state. When the PLA-mb-PBS copolymers are cooled from the melt, the PLA component crystallizes first creating superstructures, such as spherulites or axialites, which constitute a template within which the PBS component has to crystallize when the sample is further cooled down. The Avrami theory was able to fit the overall crystallization kinetics of both semi-crystalline components, and the n values for both blocks in all the samples had a correspondence with the superstructural morphology observed by PLOM. Solution mixtures of PLLA-mb-PBS and PLDA-mb-PBS copolymers were prepared, as well as copolymer/homopolymer blends with the aim to study the stereocomplexation of PLLA and PDLA chain segments. A lower amount of stereocomplex formation was observed in copolymer mixtures as compared to neat L₁₀₀/D₁₀₀ stereocomplexes. The results show that PBS chain segments perturb the formation of stereocomplexes and this perturbation increases with the amount of PBS in the samples. However, when relatively low amounts of PBS in the copolymer blends are present, the rate of stereocomplex formation is enhanced. This effect dissappears when higher amounts of PBS are present. The stereocomplexation was confirmed by FTIR and solid state ¹³C-NMR analyses.

Influence of melt-draw ratio on the crystalline behaviour of a polylactic acid cast film with a chi structure

Herein, polylactic acid cast films were prepared with different melt-draw ratios via an extrusion casting process. The oriented structure appeared at first and then a chi structure crystal was formed at higher MDR.

Physical and mechanical properties of PLA, and their functions in widespread applications - A comprehensive review

Poly(lactic acid) (PLA), so far, is the most extensively researched and utilized biodegradable aliphatic polyester in human history. Due to its merits, PLA is a leading biomaterial for numerous applications in medicine as well as in industry replacing conventional petrochemical-based polymers. The main purpose of this review is to elaborate the mechanical and physical properties that affect its stability, processability, degradation, PLA-other polymers immiscibility, aging and recyclability, and therefore its potential suitability to fulfill specific application requirements. This review also summarizes variations in these properties during PLA processing (i.e. thermal degradation and recyclability), biodegradation, packaging and sterilization, and aging (i.e. weathering and hygrothermal). In addition, we discuss up-to-date strategies for PLA properties improvements including components and plasticizer blending, nucleation agent addition, and PLA modifications and nanoformulations. Incorporating better understanding of the role of these properties with available improvement strategies is the key for successful utilization of PLA and its copolymers/composites/blends to maximize their fit with worldwide application needs.

A constitutive law for degrading bioresorbable polymers

This paper presents a constitutive law that predicts the changes in elastic moduli, Poisson's ratio and ultimate tensile strength of bioresorbable polymers due to biodegradation. During biodegradation, long polymer chains are cleaved by hydrolysis reaction. For semi-crystalline polymers, the chain scissions also lead to crystallisation. Treating each scission as a cavity and each new crystal as a solid inclusion, a degrading semi-crystalline polymer can be modelled as a continuum solid containing randomly distributed cavities and crystal inclusions. The effective elastic properties of a degrading polymer are calculated using existing theories for such solid and the tensile strength of the degrading polymer is predicted using scaling relations that were developed for porous materials. The theoretical model for elastic properties and the scaling law for strength form a complete constitutive relation for the degrading polymers. It is shown that the constitutive law can capture the trend of the experimental data in the literature for a range of biodegradable polymers fairly well.

Photoinduced topological transformation of cyclized polylactides for switching the properties of homocrystals and stereocomplexes

A new methodology for a stimuli-responsive polymer was proposed on the basis of cyclization and photocleavage. This requires only a single reaction per polymer molecule.