Cross effect between temperature and consolidation on the flow behavior of granular materials in thermal energy storage systems

Review on the modifications of natural and industrial waste CaO based sorbent of calcium looping with enhanced CO2 capture capacity

The calcium looping cycle (CaL) possesses outstanding CO2 capture capacity for future carbon-capturing technologies that utilise CaO sorbents to capture the CO2 in a looping cycle. However, sorbent degradation and the presence of inert materials stabilise the sorbent, thereby reducing the CO2 capture capacity. Consequently, the CaO sorbent that has degraded must be replenished, increasing the operational cost for industrial use. CaO sorbents have been modified to enhance their CO2 capture capacity and stability. However, various CaO sorbents, including limestone, dolomite, biogenesis calcium waste and industrial waste, exhibit distinct behaviour in response to these modifications. Thus, this work comprehensively reviews the CO2 capture capacity of sorbent improvement based on various CaO sorbents. Furthermore, this study provides an understanding of the effects of CO2 capture capacity based on the properties of the CaO sorbent. The properties of various CaO sorbents, such as surface area, pore volume, particle size and morphology, are influential in exhibiting high CO2 capture capacity. This review provides insights into the future development of CaL technology, particularly for carbon-capturing technologies that focus on the modifications of CaO sorbents and the properties that affect the CO2 capture capacity.

Influence of Long-Term CaO Storage Conditions on the Calcium Looping Thermochemical Reactivity

Long-term storage capability is often claimed as one of the distinct advantages of the calcium looping process as a potential thermochemical energy storage system for integration into solar power plants. However, the influence of storage conditions on the looping performance has seldom been evaluated experimentally. The storage conditions must be carefully considered as any potential carbonation at the CaO storage tank would reduce the energy released during the subsequent carbonation, thereby penalizing the round-trip efficiency. From lab-scale to conceptual process engineering, this work considers the effects of storing solids at low temperatures (50-200 °C) in a CO2 atmosphere or at high temperatures (800 °C) in N2. Experimental results show that carbonation at temperatures below 200 °C is limited; thus, the solids could be stored during long times even in CO2. It is also demonstrated at the lab scale that the multicycle performance is not substantially altered by storing the solids at low temperatures (under CO2) or high temperatures (N2 atmosphere). From an overall process perspective, keeping solids at high temperatures leads to easier heat integration, a better plant efficiency (+2-4%), and a significantly higher energy density (+40-62%) than considering low-temperature storage. The smooth difference in the overall plant efficiency with the temperature suggests a proper long-term energy storage performance if adequate energy integration is carried out.

Efficacy of Nanosilica Coatings in Calcium Looping Reactors

Nanosilica coatings are considered a simple physical treatment to alleviate the effect of cohesion on powder flowability. In limestone powders, these coatings buffer the rise in cohesion at high temperatures. Here, we investigate the role of particle size in the efficiency (and resilience) of these layers. To this end, this work examines a series of four limestone powders with very sharp particle size distributions: average particle size ranged from 15 to 60 μm. All the samples were treated with nanosilica at different concentrations from 0 to 0.82 wt %. Powders were subjected to short- and long-term storage conditions in calcium looping based systems: temperatures that vary from 25 to 500 °C and moderate consolidations (up to 2 kPa). Experiments monitored powder cohesion and its ability to flow by tracking the tensile strength of different samples while fluidized freely. Fluidization profiles were also used to infer variation in packings and the internal friction of the powder bed. Interestingly, for particle sizes below 50 μm, the nanosilica treatment mitigated cohesion significantly-the more nanosilica content, the better the flowability performance. However, at high temperatures, the efficiency of nanosilica coatings declined in 60 μm samples. Scanning electron microscopy images confirmed that only 60 μm samples presented surfaces barely coated after the experiments. In conclusion, nanosilica coatings on limestone are not stable beyond the 50 μm threshold. This is a critical finding for thermochemical systems based on the calcium looping process, since larger particles can still exhibit a significant degree of cohesion at high temperatures.