Growth of the fungus Paecilomyces lilacinus with n-hexadecane in submerged and solid-state cultures and recovery of hydrophobin proteins

Multi-omics insights into the response of Aspergillus parasiticus to long-chain alkanes in relation to polyethylene modification

Plastic pollution presents a global challenge, with polyethylene (PE) being among the most persistent plastics due to its durability and environmental resilience. Long-chain alkane (lcAlk) degrading microbes are a potential source of PE-degrading enzymes, as both lcAlk and PE are large hydrophobic compounds that consist exclusively of C-C and C-H bonds. In this work, we employed a multi-omics approach to study the ability of Aspergillus parasiticus MM36, an isolate derived from Tenebrio molitor intestines, to metabolize lcAlk and secrete enzymes that are potentially capable of modifying PE. The fungus was grown with hexadecane (C16) or a mixture of lcAlk (C24 to C36) as carbon sources and culture supernatants were tested daily for their ability to modify PE. Proteomic analysis identified induced oxidases hypothetically involved in lcAlk and PE functionalization. Key enzymes include multicopper oxidases, peroxidases, an unspecific peroxygenase and FAD-dependent monooxygenases. Surfactant proteins facilitating enzymatic and cellular interaction with hydrophobic substrates, such as one hydrophobin, three hydrophobic surface-binding proteins (HsbA) and one cerato platanin, were present in all secretomes. Transcriptomic analysis comparing lcAlk to C16 cultures highlighted the enrichment of oxidoreductase activities and carboxylic acid metabolism in both lcAlk incubation days, with transmembrane transporters and transferases predominating on day 2 and biosynthetic processes on day 3. In C16 cultures, hydrolytic enzymes, including esterases, were upregulated alongside Baeyer-Villiger monooxygenases, suggesting a shift toward sub-terminal hydroxylation. Integrating transcriptomic and secretomic data, we propose a mechanism for lcAlk assimilation by A. parasiticus MM36, involving extracellular oxyfunctionalization, hydrocarbon uptake via surface-modifying proteins and channeling through membrane transporters for energy consumption and biosynthetic processes. This study provides insights into fungal mechanisms for alkane metabolism and highlights their potential relevance to plastic biotransformation.

Assembly of Hydrophobin class I from Agaricus bisporus produced different amyloid-like fibrils

This work studied the extraction, purification, characterization, and assembly of hydrophobin class I from Agaricus bisporus (ABH4). The highest soluble protein concentration was obtained from the pinhead, the extraction and purification were efficient for hydrophobin class I, obtaining a band of 12 kDa. The identified sequence of hydrophobin presented the eight cysteine residues; for the prediction of the structure, hydrophobin presented more alpha helix structures than beta sheets. It was observed that the hydrophobin managed to decrease and increase the contact angle in Teflon and glass, respectively, finding a micellar critical concentration of 221 μg mL-1. ThT experiments demonstrated that the production of fibrils decreased at basic pH, while acidic and neutral pH favoured the formation of fibrils. Likewise, the addition of colloidal Teflon affects the formation of fibrils. Circular dichroism spectra proved that hydrophobin class I undergo changes in its secondary structure, increasing its alpha helix and beta sheet content after vortexing. It was observed that the analysis by scanning electron microscopy and atomic force microscopy of the hydrophobin produced different amyloid-like structures in glass and mica.

Fungal biosurfactants, from nature to biotechnological product: bioprospection, production and potential applications

Biosurfactants are in demand by the global market as natural commodities that can be added to commercial products or use in environmental applications. These biomolecules reduce the surface/interfacial tension between fluid phases and exhibit superior stability to chemical surfactants under different physico-chemical conditions. Biotechnological production of biosurfactants is still emerging. Fungi are promising producers of these molecules with unique chemical structures, such as sophorolipids, mannosylerythritol lipids, cellobiose lipids, xylolipids, polyol lipids and hydrophobins. In this review, we aimed to contextualize concepts related to fungal biosurfactant production and its application in industry and the environment. Concepts related to the thermodynamic and physico-chemical properties of biosurfactants are presented, which allows detailed analysis of their structural and application. Promising niches for isolating biosurfactant-producing fungi are presented, as well as screening methodologies are discussed. Finally, strategies related to process parameters and variables, simultaneous production, process optimization through statistical and genetic tools, downstream processing and some aspects of commercial products formulations are presented.

Putative hydrophobins of black poplar mushroom (Agrocybe cylindracea)

Hydrophobin proteins were extracted from Agrocybe cylindracea mycelia, the culture media (potato dextrose broth, PDB), and fruiting bodies. The putative hydrophobins obtained showed approximate sizes ranging from 8.0 to 25.0 kDa, dependent on their source. Multiple hydrophobin protein bands were detected in fruiting bodies. The hydrophobin yielded from aerial mycelia, or fruiting bodies, was approximately 6 mg/g dried weight. The crude extracts were examined for their properties in regards to surface modification, emulsification, and surface activity. Coating of hydrophobic Teflon sheet with crude extract made the surface significantly hydrophilic, whereas exposure of glass surfaces to extracts resulted in enhanced hydrophobicity. Crude extracts from culture media of A. cylindracea displayed emulsifying activity when mixed with hexane and could significantly reduce the surface tension of 60% ethanol and deionised water. The putative hydrophobin protein band from culture media (9.6 kDa), as analysed using LC-MS/MS, contained an amino acid fragment structurally similar to class I hydrophobin proteins from Basidiomycetes.

Solid-state Co-cultivation of Bacillus subtilis, Bacillus mucilaginosus, and Paecilomyces lilacinus Using Tobacco Waste Residue

Agro-industrial wastes are excellent sources for solid-state culture to produce spores of microorganisms, whereas microbial co-cultivation is not fully exploited in solid-state culture. In this work, the co-cultivation of different strains of Bacillus subtilis, and three microbes of B. subtilis, Bacillus mucilaginosus, and Paecilomyces lilacinus was studied using a solid medium only composed of water and tobacco waste residue after extraction of nicotine and solanesol. The influences of matrix thickness, moister, temperature, and ratio of three microbes in seed on the cell growth and spore formation were studied. The maximum viable cells and spores of each microbe reached 1013 cfu/g when cultured alone at 30 °C in a medium containing 58.3% moisture. Co-cultivation of microbes stimulated cell growth and maximum viable cells of each microbe reached 1014 cfu/g, while spore production was inhibited and decreased to 1011 cfu/g. With decreasing amount of P. lilacinus in seed, total amount of spores was increased. When the seed with a ratio of 6:3:1 for B. mucilaginosus, B. subtilis, and P. lilacinus was inoculated, the total amount of spores reached 4.14 × 1012 cfu/g and the ratio was 1.7:0.7:1. These results indicate the potential of solid-state cultivation in the high production of spores from tobacco waste residue at low cost.

Diversity and degradative capabilities of bacteria and fungi isolated from oil-contaminated and hydrocarbon-polluted soils in Kazakhstan

Bacteria and fungi were isolated from eight different soil samples from different regions in Kazakhstan contaminated with oil or salt or aromatic compounds. For the isolation of the organisms, we used, on the one hand, typical hydrocarbons such as the well utilizable aliphatic alkane tetradecane, the hardly degradable multiple-branched alkane pristane, and the biaromatic compound biphenyl as enrichment substrates. On the other hand, we also used oxygenated derivatives of alicyclic and monoaromatic hydrocarbons, such as cyclohexanone and p-tert-amylphenol, which are known as problematic pollutants. Seventy-nine bacterial and fungal strains were isolated, and 32 of them that were clearly able to metabolize some of these substrates, as tested by HPLC-UV/Vis and GC-MS analyses, were characterized taxonomically by DNA sequencing. Sixty-two percent of the 32 isolated strains from 14 different genera belong to well-described hydrocarbon degraders like some Rhodococci as well as Acinetobacter, Pseudomonas, Fusarium, Candida, and Yarrowia species. However, species of the bacterial genus Curtobacterium, the yeast genera Lodderomyces and Pseudozyma, as well as the filamentous fungal genera Purpureocillium and Sarocladium, which have rarely been described as hydrocarbon degrading, were isolated and shown to be efficient tetradecane degraders, mostly via monoterminal oxidation. Pristane was exclusively degraded by Rhodococcus isolates. Candida parapsilosis, Fusarium oxysporum, Fusarium solani, and Rhodotorula mucilaginosa degraded cyclohexanone, and in doing so accumulate ε-caprolactone or hexanedioic acid as metabolites. Biphenyl was transformed by Pseudomonas/Stenotrophomonas isolates. When p-tert-amylphenol was used as growth substrate, none of the isolated strains were able to use it.

Growth and enzymatic activity of Leucoagaricus gongylophorus, a mutualistic fungus isolated from the leaf-cutting ant Atta mexicana, on cellulose and lignocellulosic biomass

A mutualistic fungus of the leaf-cutting ant Atta mexicana was isolated and identified as Leucoagaricus gongylophorus. This isolate had a close phylogenetic relationship with L. gongylophorus fungi cultivated by other leaf-cutting ants as determined by ITS sequencing. A subcolony started with ~500 A. mexicana workers could process 2 g day^-1 of plant material and generate a 135 cm³ fungus garden in 160 days. The presence of gongylidia structures of ~35 μm was observed on the tip of the hyphae. The fungus could grow without ants on semi-solid cultures with α-cellulose and microcrystalline cellulose and in solid-state cultures with grass and sugarcane bagasse, as sole sources of carbon. The maximum CO₂ production rate on grass (V_max  = 17·5 mg CO₂  L_g^-1  day^-1 ) was three times higher than on sugarcane bagasse (V_max  = 6·6 mg CO₂  L_g^-1 day^-1 ). Recoveries of 32·9 mg_glucose  g_biomass^-1 and 12·3 mg_glucose  g_biomass^-1 were obtained from the fungal biomass and the fungus garden, respectively. Endoglucanase activity was detected on carboxymethylcellulose agar plates. This is the first study reporting the growth of L. gongylophorus from A. mexicana on cellulose and plant material.

SIGNIFICANCE AND IMPACT OF THE STUDY

According to the best of our knowledge, this is the first report about the growth of Leucoagaricus gongylophorus, isolated from the colony of the ant Atta mexicana, on semisolid medium with cellulose and solid-state cultures with lignocellulosic materials. The maximum CO₂ production rate on grass was three times higher than on sugarcane bagasse. Endoglucanase activity was detected and it was possible to recover glucose from the fungal gongylidia. The cellulolytic activity could be used to process lignocellulosic residues and obtain sugar or valuable products, but more work is needed in this direction.