Optimizing performance of a microbial carbon-capture cell using Box-Behnken design

Engineered nanomaterials for carbon capture and bioenergy production in microbial electrochemical technologies: A review

The mounting threat of global warming, fuelled by industrialization and anthropogenic activities, is undeniable. In 2017, atmospheric carbon dioxide (CO2), the primary greenhouse gas, exceeded 410 ppm for the first time. Shockingly, on April 28, 2023, this figure surged even higher, reaching an alarming 425 ppm. Even though extensive research has been conducted on developing efficient carbon capture and storage technologies, most suffer from high costs, short lifespans, and significant environmental impacts. Recently, the use of engineered nanomaterials (ENM), particularly in microbial electrochemical technologies (METs), has gained momentum owing to their appropriate physicochemical properties and catalytic activity. By implementing ENM, the MET variants like microbial electrosynthesis (MES) and photosynthetic microbial fuel cells (pMFC) can enhance carbon capture efficiency with simultaneous bioenergy production and wastewater treatment. This review provides an overview of ENMs' role in carbon capture within MES and pMFC, highlighting advancements and charting future research directions.

Study on modified SA-H3BO3 immobilization microorganism method for wastewater treatment in seawater recirculating aquaculture system

The sodium alginate-H₃BO₃ (SA-H₃BO₃) is traditionally used as bioremediation method for wastewater treatment in recirculating aquaculture system. Even though this method has many advantages (e.g., high cell loading) for immobilization, the remove of ammonium is not very effective. In this study, a modified method was built by adding polyvinyl alcohol and activated carbon into SA solution, and then crosslinked with saturated H₃BO₃-CaCl₂ solution for creating new beads. Moreover, response surface methodology was utilized for optimizing the immobilization based on Box-Behnken design. The removal rate of ammonium in 96 h was taken as the primary performance criterion to characterize the biological activity of immobilized microorganisms (i.e., Chloyella pyrenoidosa, Spirulina platensis, Nitrifying bacteria, and Photosynthetic bacteria). Based on the results, the optimal parameter of immobilization as follows: the concentration of SA was 1.46%, the concentration of polyvinyl alcohol was 0.23%, the concentration of activated carbon was 0.11%, the crosslinking time was 29.33 h, and the pH was 6.6.

Microalgal-bacterial consortia for efficient wastewater treatment: Optimization using response surface methodology

The performance of microalgal-bacterial consortia in wastewater treatment and biomass production needs to be further optimized to meet increasingly stringent effluent standards and operating costs. Besides, due to uncontrollability of ambient conditions, it is generally believed that operating conditions (e.g., aeration) respond to ambient conditions (e.g., illumination). Therefore, response surface methodology (RSM) based on Box-Behnken design was used in this study to analyze the removal of chemical oxygen demand (COD), NH₃ -N and TP, and algal biomass of the microalgal-bacterial consortia within 48 h. The results showed that under medium illumination intensity (5000 lx), photoperiod (12:12) and aeration rate (0.55 L min ^-1 ), the removal efficiency of COD, NH₃ -N and TP was the highest, and the maximal biomass growth rates were 95.43%, 95.49%, 89.42% and 99.63%, respectively. However, as the limited critical removal requirements of TP, the effluent standards can only be achieved within the small illumination intensity and photoperiod available range, even under medium aeration conditions, which means that under fixed operating conditions, the effective operation range will be very limited. In addition, based on RSM and differential equation analysis, the further study indicated that the effective treatment range can be greatly expanded within aeration responding, which meets the discharge standard of pollutants in China. PRACTITIONER POINTS: Illumination was responded by aeration for optimizing performance of microalgal-bacterial consortium for wastewater treatment and biomass productivity. The strategy of optimization was based on response surface methodology. The maximum effect on wastewater treatment and biomass productivity was based on partial differential equations and quadratic inhomogeneous equations. Limited to critical TP-removal requirements, effluent standards can meet only in the small-usable range of illumination, under medium aeration.