Improving the production of fungal exopolysaccharides with application of repeated batch fermentation technology coupling with foam separation in the presence of surfactant

Development of nanocomposite-selenium filter for water disinfection and bioremediation of wastewater from Hg and AgNPs

Selenium nanoparticles (SeNPs) are used in several sectors as antitumor, antimicrobial, and environmental adsorbents. Thus, the present research objective was the production of bacterial-SeNPs as an active and environmentally-friendly antibacterial and adsorbent agents and application into novel nanocomposite filter. From a total of 25 samples (soil, wastewater, and water) obtained from different locations in Egypt, 60 selenium-resistant bacterial isolates were obtained (on a mineral salt medium supplemented with selenium ions). After screening (based on the conversion of selenium from ionic form to nanoform), a superior bacterial isolate for SeNPs formation was obtained and molecular identified as Bacillus pumilus isolate OR431753. The high yield of SeNPs was noted after optimization (glucose as carbon source, pH 9 at 30 °C). The produced SeNPs were characterized as approximately 15 nm-diameter spherical nanoparticles, in addition to the presence of organic substances around these particles like polysaccharides and aromatic amines (protein residues). Also, they have antibacterial activity increased after formation of nanocomposite with nano-chitosan (SeNPs/NCh) against several pathogens. The antibacterial activity (expressed as a diameter of the inhibitory zone) averaged between 2.1 and 4.3, 2.7 and 4.8 cm for SeNPs and SeNPs/NCh, respectively compared with 1.1 to 1.8 cm for Amoxicillin. The produced nanoselenium/chitosan was used as a biofilter to remove mercury (Hg) and AgNPs as model chemicals with serious toxicity and potential pollutant for water bodies in many industries. The new SeNPs/NCh biofilter has proven highly effective in individually removing mercury and AgNPs from their synthetic wastewaters, with an efficiency of up to 99%. Moreover, the removal efficiency of AgNPs stabilized at 99% after treating them with the syringe filter-Se nanocomposite for 4 cycles of treatment (5 min each).

β-(1 → 3)(1 → 6)glucan from Schizophyllum commune 227E.32: High yield production via glucose/xylose co-metabolization

A co-metabolization of xylose and glucose by Schizophyllum commune 227E.32 wild mushroom for exopolysaccharide (EPS) production is presented. Cultivations performed with S. commune 227E.32 at different xylose concentrations demonstrated that the concentration of 50 g·L-1 of xylose achieved the highest EPS production, around 4.46 g·L-1. Scale-up in a stirred tank reactor (STR) was performed. 10 % inoculum showed the highest cost/benefit ratio regarding sugar conversion and EPS production (Y P/S = 0.90 g·g-1), achieving 1.82 g·L-1 of EPS. Isolation, purification, and characterization were conducted with EPS produced in flasks and STR. GC-MS analysis showed glucose as main monosaccharide constituents for both isolates. 13C NMR and HSQC-edited showed that both EPS isolated consisted of a β-D-Glcp (1 → 3) main chain, partially substituted at O-6 with nonreducing β-D-Glcp ends on every third residue, similar to β-D-glucan isolated from S. commune basidiomes known as schizophyllan (SPG). The Mw was determined by GPC to 1.5 × 106 Da (flasks) and 1.1 × 106 Da (STR). AFM topographs revealed a semi-flexible appearance of the β-D-glucan, consistent with the triple helical structures adopted by SPG and overall contour length consistent with a high molar mass.

Enhancing cellulosic digestibility of wheat straw by adding sodium lignosulfonate and sodium hydroxide to hydrothermal pretreatment

Surfactant-assisted pretreatment has been widely reported to improve the enzymatic hydrolysis of lignocellulose by promoting removal of xylan and lignin. Hence, this work innovatively proposed the use of sodium lignosulfonate (SL) as an additive of alkaline pretreatment (AP), and evaluated its influence on the cellulosic digestibility of wheat straw (WS). The results displayed that the maximum of 72-h cellulosic digestibility could reach 83.5% as 15 g/L SL was introduced to the AP process (SAP), while the cellulosic digestibility of hydrothermal and alkaline pretreated WS was only 63.6% and 70.2%, respectively. These increments were subsequently attributed to the improvement of 6.5% xylan and 26.8% lignin accelerated by SAP, resulting in positive changes in structural characteristics such as accessibility, specific surface area, and cellulosic crystalline structure. The utilization of lignin-based surfactants in pretreatment has realized the economic feasibility of lignocellulosic biorefining and broadened the application prospect of surfactants.

Foam Fractionation Methods in Aerobic Fermentation Processes

Inherently occurring foam formation during aerobic fermentations of surface-active compounds can be exploited by fractionating the foam. This also serves as the first downstream processing step for product concentration and is used for in situ product recovery. Compared to other foam prevention methods, it does not interfere with fermentation parameters or alter broth composition. Nevertheless, parameters affecting the foaming behaviour are complex. Therefore, the specific foam fractionation designs need to be engineered for each fermentation individually. This still hinders a widespread industrial application. However, few available commercial approaches demonstrate the applicability of foam columns on an industrial scale. This systematic literature review highlights relevant design aspects and process demands that need to be considered for an application to fermentations and proposes a classification of foam fractionation designs and methods. It further analyses substance-specific characteristics associated with foam fractionation. Finally, solutions for current challenges are presented, and future perspectives are discussed. This article is protected by copyright. All rights reserved.

Surfactants in biorefineries: Role, challenges & perspectives

The use of lignocellulosic biomass (LCB) as feedstock has received increasing attention as an alternative to fossil-based refineries. Initial steps such as pretreatment and enzymatic hydrolysis are essential to breakdown the complex structure of LCB to make the sugar molecules available to obtain bioproducts by fermentation. However, these steps increase the cost of the bioproduct and often reduces its competitiveness against synthetic products. Currently, the use of surfactants has shown considerable potential to enhance lignocellulosic biomass processing. This review addresses the main mechanisms and role of surfactants as key molecules in various steps of biorefinery processes, viz., increasing the removal of lignin and hemicellulose during the pretreatments, increasing enzymatic stability and enhancing the accessibility of enzymes to the polymeric fractions, and improving the downstream process during fermentation. Further, technical advances, challenges in application of surfactants, and future perspectives to augment the production of several high value-added bioproducts have been discussed.

Improving the bioremediation technology of contaminated wastewater using biosurfactants produced by novel bacillus isolates

Biosurfactants have many advantages outside chemical one, led for application it through different sectors. So, the present study aimed for improving the bioremediation technology of contaminated wastewater using biosurfactants produced by novel bacillus isolates. In this regard, Bacillus thuringiensis and Bacillus toyonensis strains were obtained as most producing isolates of highly active biosurfactants. The optimized conditions for high biosurfactants yield production were established. Also, the stability of the produced biosurfactants at various conditions, pH, temperature and salinity was studied. The biosurfactant has been reported up to 120 °C, pH 12 and 10% of NaCl. The identified biosurfactants, decanoic acid and oleamide were applied for wastewater remediation from oil residues and pathogens contamination. The biosurfactant was had high antibacterial activity compared with references antimicrobial drugs, as well as it is enhanced bioremediation technology for petroleum oil residues contaminating sites. Thus, we can say, these biosurfactants could achieve the objectives of sustainable development.