Capacitive Electrodes for Energy Generation by Reverse Electrodialysis

Engineering Electrode Rinse Solution Fluidics for Carbon-Based Reverse Electrodialysis Devices

Natural salinity gradients are a promising source of so-called "blue energy", a renewable energy source that utilizes the free energy of mixing for power generation. One promising blue energy technology that converts these salinity gradients directly into electricity is reverse electrodialysis (RED). Used at its full potential, it could provide a substantial portion of the world's electricity consumption. Previous theoretical and experimental works have been done on optimizing RED devices, with the latter often focusing on precious and expensive metal electrodes. However, in order to rationally design and apply RED devices, we need to investigate all related transport phenomena─especially the fluidics of salinity gradient mixing and the redox electrolyte at various concentrations, which can have complex intertwined effects─in a fully functioning and scalable system. Here, guided by fundamental electrochemical and fluid dynamics theories, we work with an iron-based redox electrolyte with carbon electrodes in a RED device with tunable microfluidic environments and study the fundamental effects of electrolyte concentration and flow rate on the potential-driven redox activity and power output. We focus on optimizing the net power output, which is the difference between the gross power output generated by the RED device and the pumping power input, needed for salinity gradient mixing and redox electrolyte reactions. We find through this holistic approach that the electrolyte concentration in the electrode rinse solution is crucial for increasing the electrical current, while the pumping power input depends nonlinearly on the membrane separation distance. Finally, from this understanding, we designed a five cell-pair (CP) RED device that achieved a net power density of 224 mW m-2 CP-1, a 60% improvement compared to the nonoptimized case. This study highlights the importance of the electrode rinse solution fluidics and composition when rationally designing RED devices based on scalable carbon-based electrodes.

Enhanced Ionic Conductivity and Power Generation Using Ion-Exchange Resin Beads in a Reverse-Electrodialysis Stack

Reverse electrodialysis (RED) is a promising technique for harvesting energy by mixing seawater with river water. The energy production is usually limited by ionic conductivity in dilute compartments of a RED system. Novel tests were conducted in this research, which used ion-exchange resin beads (IERB) to replace nonconductive spacer fabrics in RED compartments with dilute NaCl solution in a modified stack containing Fumasep FKS and Fumasep FAS membranes. We compared the conductivity of an IERB packed bed with that of an inert glass-beads-packed bed as a control to confirm IERB's effectiveness. When applied in a RED system, IERB decreased the stack resistance by up to 40%. The maximum gross power density improved by 83% in the RED stack compared to that in a regular RED stack at 1.3 cm/s average linear flow velocity. IERB-filled stack resistance was modeled. The model results fit well with experimental data, thereby confirming the effectiveness of the new approach presented here. The net power density is also estimated based on the measured pressure drop and pumping energy model. Both gross and net power density was improved by over 75% at higher flow rate. A net power density of 0.44 W/m(2) was achieved at a cell thickness of 500 μm. To the best of our knowledge, this research is the first to study the impact of IERB on power generation and establishes a new approach to improving the power performance of a RED system.