Biodegradation of Municipal Wastewater with Local and Commercial Bacteria

Characterization and biodegradation of paracetamol by biomass of Bacillus licheniformis strain PPY-2 isolated from wastewater

Industrialization leads to the entry of diverse xenobiotic compounds into the environment. One such compound is paracetamol (APAP), which is emerging as a pharmaceutical and personal care pollutant (PPCP). In this study, the APAP degrading bacterium was isolated by enrichment culture method from the sewage sample. The microscopy, biochemical, and 16S rRNA gene sequence analyzed the isolate PPY-2, which belongs to Bacillus licheniformis, and GenBank assigned accession number MN744328. Physiological and batch culture degradation studies have indicated that the strain involved in the degradation of APAP. The optimum pH for degradation of the PPY-2 was 7.7, whereas the temperature was 25 °C, agitation speed was 142 rpm, and concentration of APAP was 621 mg/L reported, and the optimum temperatures were 42 °C and 32 °C, respectively. Biomass kinetic was studied at optimal physical conditions, which suggested that the specific growth rate (μ) was 721 mg/L. The GC-MS chromatogram peaks have detected metabolites, viz., oxalic acid, 2-isopropyl-5-methyl cyclohexanone, and phenothiazine. The study confirmed that Bacillus licheniformis strain PPY-2 exhibits metabolic potential to biodegradation APAP and can be further deployed in bioremediation.

Microbiological analysis and bioremediation bioassay for characterization of industrial effluent

This study aims to investigate bacteria for biodegradation of oil pollutants from oily industrial wastewater to be used as bioremediation tools and to determine the characterization of bioremediation bioassays. A screening bioassay was carried out using six exogenous environmental bacterial strains to degrade oily pollution, which indicated promising clearance of the oily wastewater. Two strains, namely Enterobacter cloacae 279-56 (R4) and Pseudomonas otitis MCC10330 (R19), could successfully eliminate oil content and reasonable removal of the organic load. Results showed that the two promising bacterial candidates (R4 and R19) were selected according to the preliminary screening of the six tested bacteria considered the most efficient for all the tested parameters. The highest Removal Efficiency (Removal Efficiency resulted in Residual levels of total dissolved solids (TDS), biochemical oxygen demand, chemical oxygen demand, and Oil content in the treated oily wastewater effluents are 1940, 171, 131, and 84 mg/l respectively where these results are not within safe discharge limits, except for TDS. Hence, the bioremediation assays were carried out using the mixed culture since it was the most efficient strain for degrading all tested parameters.

Building upon current knowledge and techniques of indoor microbiology to construct the next era of theory into microorganisms, health, and the built environment

In the constructed habitat in which we spend up to 90% of our time, architectural design influences occupants' behavioral patterns, interactions with objects, surfaces, rituals, the outside environment, and each other. Within this built environment, human behavior and building design contribute to the accrual and dispersal of microorganisms; it is a collection of fomites that transfer microorganisms; reservoirs that collect biomass; structures that induce human or air movement patterns; and space types that encourage proximity or isolation between humans whose personal microbial clouds disperse cells into buildings. There have been recent calls to incorporate building microbiology into occupant health and exposure research and standards, yet the built environment is largely viewed as a repository for microorganisms which are to be eliminated, instead of a habitat which is inexorably linked to the microbial influences of building inhabitants. Health sectors have re-evaluated the role of microorganisms in health, incorporating microorganisms into prevention and treatment protocols, yet no paradigm shift has occurred with respect to microbiology of the built environment, despite calls to do so. Technological and logistical constraints often preclude our ability to link health outcomes to indoor microbiology, yet sufficient study exists to inform the theory and implementation of the next era of research and intervention in the built environment. This review presents built environment characteristics in relation to human health and disease, explores some of the current experimental strategies and interventions which explore health in the built environment, and discusses an emerging model for fostering indoor microbiology rather than fearing it.

Characterization, optimization and kinetics study of acetaminophen degradation by Bacillus drentensis strain S1 and waste water degradation analysis

Background

In this study, the biodegradation of N-acetyl-para-aminophenol also known as acetaminophen (APAP, paracetamol) was studied by bacterial strain Bacillus drentensis strain S1 (accession no. KY623719) isolated from sewage sample.

Results

The Bacillus drentensis strain S1 was isolated from the sewage sample using the enrichment culture method. As per our knowledge this is the first Bacillus drentensis strain reported for the degradation of APAP. In this study a 20-L batch reactor was employed for degradation of APAP. The maximum specific growth rate (μmax) was observed at 400 mg/L concentration of APAP. The pilot-scale anaerobic batch reactor of was stable and self-buffered. The degradation in pilot-scale reactor was slow as compared to batch experiments due to fluctuation in pH and exhaustion of nutrients. Design-Expert® software was used for optimization of conditions for APAP degradation; such as temperature (40 °C), pH (7.0), concentration of APAP (300 g/L) and agitation speed (165 rpm). The FTIR and GC–MS were used to identify the degradation metabolites. The intermediates of degradation like 2-isopropyl-5-methylcyclohexanone and phenothiazine were observed, based on these results the metabolic pathway has been predicted.

Conclusions

The optimization, kinetic, batch study and pilot study indicates the potential of Bacillus drentensis strain S1 for degradation of acetaminophen. The experimental design, optimization and statistical analysis were performed by Design Expert® software. The optimal growth condition for Bacillus drentensis strain S1 was found to be at temperature 40 °C, pH 7, acetaminophen at concentration of 300 (mg/L) and agitation speed 165 rpm. The GC–MS and FTIR was used for identification of metabolites produced during acetaminophen degradation and the partial metabolic pathway for degradation of acetaminophen was also proposed .

Design of a bioaugmented multistage biofilter for accelerated municipal wastewater treatment and deactivation of pathogenic microorganisms

Biological treatment of municipal wastewater for reuse in irrigation is highly required, especially with the current global financial and water shortage crises. Bioaugmentation is a simple and cost-effective technology which could be a useful tool in alleviating this challenge. Thus, this study aimed to enhance the biological treatment of municipal wastewater using a bioaugmented substance supplemented in a three-stages bio-filter consisting of a sedimentation step followed by gravel biofiltration and then sand biofiltration at a laboratory scale. Also, a toxicity assay, the antimicrobial effect of the bioaugmented substance against pathogenic microorganisms, and identification of the synergistic effect of the bacterial consortium involved in the bioaugmented substance were studied. The bioaugmented substance was nontoxic and had an antimicrobial effect against the tested potentially pathogenic microorganisms (Escherichia coli, Pseudomonas aeruginosa, Listeria monocytogenes, Staphylococcus aureus, and Candida albicans). The minimum effective concentration of the bioaugmented substance for organic, inorganic and microbial pollutants removal from high strength wastewater was 2.5 ppm with a contact time of 6-8 h. The removal efficiencies of H₂S, COD, BOD₅, total solids (TS), total dissolved solids, total suspended solids, ammonia, nitrate, phosphorus, and oil and grease reached 85, 93.4, 83.5, 37, 49.2, 93.4, 100, 55.7, 76.6 and 76.6%, respectively in the treated effluent after sand biofiltration. The physicochemical parameters of the treated wastewater effluent were below the Egyptian recommended limits (Law 84/1984) for use in irrigation. However, COD and BOD values were 90.33 and 38.46 mgO₂/L, respectively, and were still above the regulations (COD ≤60 and BOD ≤20). The high fecal coliforms count in the wastewater influent (8.4 × 10⁸ MPN-index/100 mL) were 95.1% removed after the sedimentation stage, and 99.99% removal was achieved after gravel and sand biofiltration. Thus, this study successfully designed a bioaugmented multistage biofiltration system for the effective removal of pollutants from wastewater, especially in resource-limited areas.

From one species to another: A review on the interaction between chemistry and microbiology in relation to cleaning in the built environment

Since the advent of soap, personal hygiene practices have revolved around removal, sterilization, and disinfection-both of visible soil and microscopic organisms-for a myriad of cultural, aesthetic, or health-related reasons. Cleaning methods and products vary widely in their recommended use, effectiveness, risk to users or building occupants, environmental sustainability, and ecological impact. Advancements in science and technology have facilitated in-depth analyses of the indoor microbiome, and studies in this field suggest that the traditional "scorched-earth cleaning" mentality-that surfaces must be completely sterilized and prevent microbial establishment-may contribute to long-term human health consequences. Moreover, the materials, products, activities, and microbial communities indoors all contribute to, or remove, chemical species to the indoor environment. This review examines the effects of cleaning with respect to the interaction of chemistry, indoor microbiology, and human health.