Disposal Problem of Arsenic Sludge Generated During Arsenic Removal from Drinking Water

A review on multi-synergistic transition metal oxide systems towards arsenic treatment: Near molecular analysis of surface-complexation (synchrotron studies/modeling tools)

The science and interface chemistry between the arsenic (As) anions and the different adsorbent systems have been gaining interest in recent years in environmental remediation applications. Metal-oxides and the corresponding hybrid systems have shown promising performance as novel adsorbents in various treatment technologies. The abundance, surface chemistry, high surface area (active-centres), various synthesis and functionalization methodologies, and good recyclability make these metal oxide-based nanomaterials as potential remediating agents for As oxyanions. This work critically reviews eight different platforms focused on the arsenic contamination issue, where the first classification describes the origin of arsenic contamination and presents geographical and demo-graphical considerations. The following section briefs the state-of-the-art remediation techniques for arsenic treatment with a comparative evaluation. An emphasized discussion has been provided regarding the adsorption and classification of various metal oxide adsorbents. In the next classification, various multi-synergism abilities like Redox activity, Surface functional groups, Surface area/morphology, Heterogeneous catalysis, Reactive oxygen species, Photo-catalytic/electro-catalytic reactions, and Electrosorption are detailed. The classification of various characterization tools for accessing the arsenic remediation qualitatively and quantitatively are given in the fifth chapter. The first-of-its-kind dedicated analysis has been given on the surface complexation aspects of the arsenic speciation onto various metal adsorbent systems using synchrotron results, surface-complexation modeling, and molecular simulation (e.g., DFT) in the sixth chapter. The current sensing applications of these novel nano-material systems for arsenic determination using colorimetric and electrochemical-based analytical tools and a note about the economic parameters, i.e., regeneration aspects of various adsorbent systems/the sustainable applications of the treated sludge materials, are provided in the final sections. This work makes a critical analysis of 'Environmental Nanotechnology' towards 'Arsenic Treatment'.

Arsenite removal from drinking water by bark-based magnetic iron oxide particle (BMIOP): a column study

The removal of arsenite [As(III)] from drinking water was investigated in a column at flow rates of 2.0 and 5.0 mL/min (up-flow direction) using bark-based magnetic iron oxide particles (BMIOP) prepared by coating (Fe(NO₃)₃.9H₂O) over Tamarindus Indica bark. The BMIOP was compared with regenerated BMIOP, commercial activated carbon, commercial activated alumina (Al₂O₃). At 2.0 mL/min, empty bed contact time (EBCT), breakthrough time (BT), the volume of treated water and breakthrough capacity (BC) on fresh BMIOP were found to be 6.8 min, 33.15 h, 4.380 L and 0.742 mg/g, respectively, and at 5.0 mL/min, were found to be 4.1 min, 13 h, 3.675 L and 0.453 mg/g respectively. EBCT, BT and BC were increased by 65.85%, 155% and 63.79%, respectively, as the flow rate was reduced from 5.0 to 2.0 mL/min. After regeneration of BMIOP, EBCT, BT, saturated time, BC and saturation capacity (SC) were reduced by 21.95%, 15.38%, 55.15%, 16.78% and 29.71%, respectively. The BC of fresh BMIOP was increased by factors 4.15, 3.60 and 1.20 and SC by factors 9.51, 7.88 and 1.42 compared to commercial activated carbon, commercial activated Al₂O₃ and regenerated BMIOP, respectively. Logit model could be used for the design of the adsorption column. Thomas model and artificial neural network (ANN) were applied to predict the characteristic column parameters useful for process design. Quality of treated water meets BIS requirements. Toxicity Characteristic Leaching Procedure (TCLP) and semi-dynamic tests show that the exhausted BMIOP is safe for disposal in a secure landfill; hence, BMIOP has been proved to separate As(III) from water.

Arsenic and fluoride removal by electrocoagulation process: A general review

The environmental sector has expressed a growing interest in using electrocoagulation (EC) to treat groundwater/wastewater for drinking/recycling purposes. In the EC process, the electro-dissolution of sacrificial metallic anodes through direct application of current/cell potential dissolves the metals, which precipitate as oxides and hydroxides depending on the electrolyte pH. These particles have large surface areas and can remove pollutants by coagulation. The EC process has been considered an alternative technology due to its versatility, efficiency, low cost, and environmental compatibility. Unfortunately, the lack of knowledge about scaling-up this process has limited its implementation at the industrial scale. The aim of this study is to provide a review of the EC process used for removing arsenic and fluoride from groundwater and wastewater. Approximately 80 published studies were reviewed for this paper. The fundamentals of the EC process and importance of its operating conditions, i.e., electrode material, current density, supporting electrolyte, and pH, are reported in this paper. Additionally, overview of floc characterization and energy consumption are also presented. Finally, this paper also discusses the future perspectives.

Picomolar-level detection of mercury within non-biological/biological aqueous media using ultra-sensitive polyaniline-Fe3O4-silver diethyldithiocarbamate nanostructure

Mercury as the 3rd most toxic, non-biodegradable, and carcinogenic pollutant can adversely affect the ecosystem and health of living species through its bioaccumulation within the nature that can affect the top consumer in the food chain; therefore, it is vital to sense/remove Hg²⁺ within/from aqueous media using practical approaches. To address this matter, we modified the glassy carbon electrode (GCE) with ultra-sensitive, interconnected, sulfurized, and porous nanostructure consisted of polyaniline-Fe₃O₄-silver diethyldithiocarbamate (PANi-F-S) to enhance the sensitivity, selectivity, and limit of detection (LOD) of the sensor. Obtained results showed that at optimum conditions (i.e., pH value of 7, deposition potential of - 0.8 V, and accumulation time of 120 s), for Hg²⁺ concentration ranging from 0.4 to 60 nM, the modified electrode showing linear relative coefficient of 0.9983, LOD of 0.051 nM, LOQ of 0.14 nM, and sensitivity of 1618.86 μA μM^-1 cm^-2 highlights superior sensitivity of the developed platform until picomolar level. Additionally, the modified electrode showed ideal repeatability, stability, reproducibility, and selectivity (by considering Zn²⁺, Cd²⁺ Pb²⁺, Cu²⁺, Ni²⁺, and Co²⁺ as metal interferences) and recovered more than 99% of the Hg²⁺ ions within non-biological (mineral, tap, and industrial waters) and biological (blood plasma sample) fluids. Graphical abstract.

Sustainability assessment of arsenic-iron bearing groundwater treatment soil mixed mortar in developing countries, Bangladesh

The open disposal of groundwater treated soil containing arsenic (As) and iron (Fe) is a critical environmental issue in developing countries like Bangladesh. The current study attempts to use the arsenic-iron soil (AIS) as partial replacement of aggregate for preparing the sustainable solid mortar composite. Four dosages (2.5-10%) of AIS were applied as the substitution of fine aggregate for finding the optimum quantity of AIS, justifying by strength and nominal leaching content of As and Fe in pH solution 4.0 and 7.0 and curing temperatures of 25, 30, and 35 °C. Also, the external surfaces of solidified matrices were modified with cement grouting solution and cement plaster to resist the migration of concerned contaminants to curing media. The analytical compressive and flexural strength results showed that the solid mortars blended with 2.5 and 5% AIS obtained over 80% of the control specimens throughout the testing ages. Moreover, the study found that 5% AIS bearing hardened composition with exterior cement plaster exhibited the releasing contents of As and Fe below the drinking water standard in both pH solutions and adopted three curing temperatures, which is safe as well as economical to use as a construction material. The scanning electron microscopy (SEM) observations and energy dispersive spectroscopy (EDS) analysis also demonstrated the encapsulation patterns of target contaminants by forming hard microstructures of calcium silicate hydrate, ettringite and calcium-arsenic compounds. The outcomes of the study showed the potentiality of recycling the contaminated groundwater treatment soil as building materials in an eco-friendly way.

Arsenic removal by electrocoagulation process: Recent trends and removal mechanism

Arsenic contamination in drinking water is a major issue in the present world. Arsenicosis is the disease caused by the regular consumption of arsenic contaminated water, even at a lesser contaminated level. The number of arsenicosis patients is increasing day-by-day. Decontamination of arsenic from the water medium is the only one way to regulate this and the arsenic removal can be fulfilled by water treatment methods based on separation techniques. Electrocoagulation (EC) process is a promising technology for the effective removal of arsenic from aqueous solution. The present review article analyzes the performance of the EC process for arsenic removal. Electrocoagulation using various sacrificial metal anodes such as aluminium, iron, magnesium, etc. is found to be very effective for arsenic decontamination. The performances of each anode are described in detail. A special focus has been made on the mechanism behind the arsenite and arsenate removal by EC process. Main trends in the disposal methods of sludge containing arsenic are also included. Comparison of arsenic decontamination efficiencies of chemical coagulation and EC is also reported.