Influence of temperature and residence time on characteristics of biochars derived from agricultural residues: A comprehensive evaluation

Meta-analysis reveals the processes and conditions of using biochar to control antibiotic resistance genes in soil

Soil is a significant reservoir of antibiotic resistance genes (ARGs) and an important habitat for pathogens associated with many clinical infections and plant disease outbreaks. Although scientists have found that biochar can reduce ARGs in soil, the understanding of how biochar removes soil ARGs and the influencing factors remains limited. Here, a meta-analysis of 65 published studies was conducted to illuminate the mechanisms through which biochar remediates ARG-contaminated soils. In biochar-amended soil, the antibiotic content significantly decreased by 24.1 %, while the abundances of mobile genetic elements and ARG host bacteria declined by 23.5 % and 12.1 %, respectively. The reduced antibiotic content, suppressed mobile genetic elements, and altered bacterial community structure collectively led to a 41.8 % reduction in soil ARG abundance. In addition, wood-derived biochar pyrolyzed at 300-500 °C exhibited a substantial advantage in the remediation of ARGs. Furthermore, biochar application decreased the abundance of ARGs in alkaline and neutral soil more markedly than that in acidic soil. The results of this research confirmed the positive mitigating effect of biochar on ARGs in soil, providing valuable insights for the prevention and control of ARG pollution.

Enhanced adsorption of phosphate by rice straw-based biochar prepared via metal impregnation and bio-template technology

Phosphate removal from water through green, highly efficient technologies has received much attention. Biochar is an effective adsorbent for phosphate removal. However, adsorption capacity of phosphate on pristine rice straw-based biochar was not optimistic due to low anion exchange capacity. In this study, Fe-modified, Mg-modified and MgFe-modified rice straw-based biochar (Fe-BC, Mg-BC and MgFe-BC) were prepared by combining metal impregnation and biological template methods to improve the adsorption capacity of phosphate. The surface characteristics of biochar and the adsorption behavior of phosphate on biochar were investigated. The modified biochar had the specific surface area of 17.910-39.336 m2/g, and their surfaces were rich in a large number of functional groups and metal oxides. Phosphate release was observed on pristine rice straw-based biochar without metal impregnation. The maximum adsorption capacities of phosphate on MgFe-BC, Mg-BC and Fe-BC at 298 K were 6.93, 5.75 and 0.23 mg/g, respectively. Adsorption was a spontaneous endothermic process, while chemical adsorption dominated and electrostatic attraction and pores filling existed simultaneously. Based on the site energy distribution theory study, the standard deviation of MgFe-BC decreased from 6.96 to 4.64 kJ/mol with temperature increasing, which proved that the higher the temperature would cause the lower heterogeneity. Moreover, the effects of pH, humic acid, co-existing ions and ionic strength on phosphate adsorption of MgFe-BC were also discussed. MgFe-BC with fine pores and efficient adsorption sites is an ideal adsorbent for phosphate removal from water.

Heterogeneous porous biochar-supported nano NiFe2O4 for efficient removal of hazardous antibiotic from pharmaceutical wastewater

Due to the dual issues of antibiotic resistance and bioaccumulation toxicity, antibiotics are ubiquitously present in aquatic environments, and this is causing serious concern. Herein, novel nickel ferrite (NiFe2O4) nanoparticles were successfully loaded onto activated biochar (BC) derived from banana peel (BP) to obtain magnetic nanocomposite (BC-NiFe2O4) as an effective biosorbent for the ciprofloxacin antibiotic (CIP) elimination from pharmaceutical effluent. A facile co-precipitation approach was utilized to construct the heterogeneous BC-NiFe2O4. The synthesized materials were systematically characterized using techniques such as XRD, FE-SEM, EDX, HR-TEM, BET, FTIR, and XPS. In addition, the magnetic measurements indicated the ferromagnetic behavior of the BC-NiFe2O4 sample. The influencing factors (i.e., pH, contact time, initial concentration, dose of adsorbent, ions interference, and solution temperature) of the adsorption process were also well studied. The adsorption capacity of the BC-NiFe2O4 heterostructure was 68.79 mg g-1 compared to the BC sample (35.71 mg g-1), confirming that the loading of magnetically NiFe2O4 nanoparticles onto the surface of porous biochar enhanced its stability and adsorption performance for CIP removal, wherein the metal-antibiotic complex has a significant effect for the removal of CIP. Moreover, the Langmuir adsorption isotherm and the pseudo-second-order model displayed a good fit for the experimental data. The values of △H° and △G° revealed that the adsorption process was endothermic and spontaneous. The coordination affinities, π-π stacking, and H-bonding interactions play a more critical role in the adsorption mechanism that confirmed by FTIR and XPS analysis. To study the stability of BC-NiFe2O4 nanocomposites, desorption and recycling studies were investigated. The results revealed that after three cycles, no significant loss in removal efficiency was detected, reflecting the stability and reusability of the prepared BC-NiFe2O4 nanocomposite.

New insights into the production, characterization and potential uses of vineyard pruning waste biochars

Vineyard pruning waste (VP) can be converted into a useful char using pyrolysis as part of a valorization strategy. This study analyzed the effect of temperature (300 and 600 °C) and residence time (1 and 3 h) on an ample number of properties of VP derived biochars, including potential negative environmental impacts. The results showed a clear influence of temperature on biochar's properties and a weaker effect of residence time. Increasing temperature raised soil pH, electrical conductivity (EC), ash and C contents, aromaticity, specific surface area, solid density, mesoporosity and partial graphitization. However, higher pyrolysis temperature reduced O/C and N/C ratios, total N, P and Mg, and polycyclic aromatic hydrocarbons (PAHs). Particularly, the concentration of water extractable organic carbon (WEOC) decreased dramatically with pyrolysis temperature. Moreover, the WEOC fraction of biochars pyrolyzed at 300 °C exhibited a larger aromaticity than those pyrolyzed at 600 °C. Prolonged residence time increased ash content and fixed carbon (FC) and decreased H/C and O/C ratios; however, most frequently this parameter affected biochar properties following opposite trends for the two pyrolysis temperatures. Hydrophysical properties were adequate to consider VP derived biochars as growing media component. PAH concentration was much lower than thresholds following international standards. The germination index increased with temperature and decreased with residence time, so that phytotoxicity was observed in VP and in biochars pyrolyzed for 3 h. Our research demonstrates that, besides temperature, residence time can be useful to modulate the properties of biochars and that prolonged time effect is temperature-dependent.

Biochar as a carbonaceous material to enhance soil quality in drylands ecosystems: A review

Drylands are fragile environments that should be carefully managed to improve their quality and functions to achieve sustainable development. Their major problems involve low availability of nutrients and soil organic carbon content. Biochar effect on soil is a joint response of micro to nano sized biochar and soil characteristics. In this review, we attempt to carry out a critical analysis of biochar application to enhance dryland soil quality. Correlating the effects identified from its soil application, we explored the subjects that remains open in the literature. The relation of composition-structure-properties of biochar vary among pyrolysis parameters and biomass sources. Limitations in soil physical quality in drylands, such as low water-holding capacity, can be alleviated by applying biochar at a rate of 10 Mg ha-1 also resulting in beneficial effects on soil aggregation, improved soil porosity, and reduced bulk density. Biochar addition can contribute to the rehabilitation of saline soils, by releasing cations able to displaces sodium in the exchange complex. However, the recovery process of salt-affected soils might be accelerated by the association of biochar with another soil conditioners. This is a promising strategy especially considering the biochar alkalinity and variability in nutrients bioavailability to improve soil fertilization. Further, while higher biochar application rate (>20 Mg ha-1) might change soil C dynamics, a combination of biochar and nitrogen fertilizer can increase microbial biomass carbon in dryland systems. Other aspect of biochar soil application is the economic viability of scale-up production, which is mainly associate to pyrolysis process being biochar production the costliest stage. Nevertheless, the supplying of feedstock might also represent a great input on biochar final costs. Therefore, biochar-based technology is a big opportunity to improve fragile environments such as drylands, integrating sustainable technologies with regional development. Considering the specificity of application area, it might be a model of sustainable agricultural practices protecting the environment in a bioeconomic perspective.

Hydrothermal conversion of Chinese cabbage residue for sustainable agriculture: Influence of process parameters on hydrochar and hydrolysate

The demands on novel and sustainable techniques for vegetable waste (VW) valorization continues to increase during the past few decades due to the growing waste production under the flourishing vegetable industries. In this study, Chinese cabbage residues were hydrothermal carbonization (HTC) at 180, 200, 220 and 240 °C for 2 to 6 h to explore the impacts of process parameters on the characteristics of hydrochars and hydrolysates and their feasibility in sustainable agriculture. Results indicated that hydrothermal temperature had a greater impact on cabbage residue hydrolysis than the residence time. With the rising reaction severity, hydrochars became more alkaline with higher amount of ash and carbon (C), while the pH and dissolved organic nitrogen (DON) and NH₄⁺-N in the hydrolysate were gradually reduced. The thermogravimetric analysis (TG-DTG) indicated that organic constitutions in the feedstock went through incomplete decomposition. Although the recalcitrance index (R50) steadily increased through HTC (0.37-0.46), hydrochars were unstable and would not applicable for carbon sequestration. Furthermore, hydrochars and hydrolysate would be optimal media for plants seedling and growth for the abundant nutrients and dissolved organic compounds but reduced phytotoxicity. In conclusion, these results showed that HTC is highly applicable for vegetable waste management for sustainable agriculture.

Tailoring biochar for persulfate-based environmental catalysis: Impact of biomass feedstocks

Biochar, a carbonaceous material with engineering potential, has gained attention as an efficient catalyst in persulfate-based advanced oxidation processes (PS-AOPs). Although biomass feedstocks are known as a critical factor for the performance of biochar, the relationship between the catalytic efficiency/mechanism and the types of biomass feedstocks is still unclear. Thus, according to recent advances in experimental and theoretical researches, this paper provides a systematic review of the properties of biochar, and the relationship between catalytic performance in PS-AOPs and biomass feedstocks, where the differences in physicochemical properties (surface properties, pore structure, etc.) and activation path of different sourced biochars, are introduced. In addition, how the tailoring of biochar (such as heteroatomic doping and co-pyrolysis of biomass) affects its activation efficiency and mechanism in PS-AOPs is summarized. Finally, the suitable application scenarios or systems of different sourced biochars, appropriate methods to improve the catalytic performance of different types of biochar and the prospects and challenges for the development of biochar in PS-AOPs are proposed.

Stability of biochar in mineral soils: Assessment methods, influencing factors and potential problems

Amendment of biochar into mineral soils has been reported a promising strategy for carbon sequestration and greenhouse gas mitigation due to its high stability. Currently, most studies on the stability of biochar are mainly focused on the assessment methods and influencing factors. The assessment methods include qualitative evaluation of physical and chemical properties, and utilization of kinetic mineralization models on the basis of laboratory incubation. As a result, these assessment methods are difficult to accurately reflect the real impact of the interaction between biochar and environmental factors. This article reviews the existing assessment methods, influencing factors, and the impact of environmental aging on the stability of biochar. It is found that under the influence of environmental factors, existing assessment methods are likely to overestimate the stability of biochar in mineral soils. Therefore, more emphases should be laid on the analyses of the deficiencies in the existing assessment methods on the stability of biochar in the consideration of practical applications. Long-term field experiment is strongly recommended to establish a more accurate assessment model on biochar stability for the evaluation of its carbon sequestration potential in mineral soils.

Effects of biochar addition on the abundance, speciation, availability, and leaching loss of soil phosphorus

As a promising soil amendment, biochar has demonstrated its potential for influencing soil nutrient transformations. The effects of biochar on soil phosphorus (P) transformations have received much less attention than its effects on carbon cycling. A review of the literature reveals that biochar applications to soils may have notable effects on the abundance, speciation, availability, and leaching loss of soil P. However, a comprehensive and systematic understanding of the biochar-induced environmental behavior of soil P has not been obtained so far. Therefore, in this review, we analyzed and identified the known and potential mechanisms through which biochar affects P behavior in soils: (1) biochar as a source of P provides soluble and exchangeable P to soil; (2) biochar enhances the availability of endogenic soil P by influencing P-related complexation and metabolism effects; and (3) biochar affects P leaching losses directly or indirectly by adsorbing P, improving P retention by soil, and facilitating P assimilation by plants. By presenting a broad and detailed illustration of P behaviors in biochar-amended soils, this paper suggests that the application of biochar to soils will help enlarge soil P pools, increase soil P availability, and decrease P leaching losses from soil. Additional studies are needed to further elucidate the long-term effects of biochar addition on soil P transformations, explore how biochar-derived dissolved organic matter (BDOM) affects the mobility and availability of soil mineral-associated P, and examine the transport of particulate P in biochar-amended soils.