The deficits of isometric knee flexor strength in lengthened hamstring position after hamstring strain injury

Intra-rater and Inter-rater Reliability of the KangaTech (KT360) Fixed Frame Dynamometry System During Maximal Isometric Strength Measurements of the Knee Flexors

Background

Fixed-frame dynamometry systems are used worldwide to assess isometric strength in both general and athletic populations. There is currently a paucity of published work where reliability estimates for fixed-frame dynamometry systems have been estimated. The aim of this study was to determine the inter-and intra-rater reliability of the KangaTech (KT360) fixed frame dynamometry system when measuring maximal isometric strength of the knee flexor muscles.

Study Design

Inter and intra-rater reliability single cohort study.

Methods

Twenty healthy university-level athletes (age= 21.65 ± 3 years, weight= 74.465 ± 30kg, height= 170.1 ± 7.0cm) took part in two testing sessions where two raters collected data during a 90° hip and knee flexion protocol. Participants performed each test twice, building to a maximal isometric contraction holding over a 5 second period with 30 second rest between sets. Data were checked for normality using a Shapiro-Wilk test. Intraclass correlation coefficient (ICC), standard error of measurement (SEM) and minimal detectable change (MDC) were calculated. Finally, a Bland-Altman analysis was used to determine the levels of agreement for intra-and inter-rater measurements.

Results

High levels of agreement were demonstrated between left and right knee flexion as 95% of the differences were less than two standard deviations away from the mean. 'Almost perfect' intraclass correlation coefficient (ICC) values were demonstrated (Knee flexion: Inter-rater: Left, 0.99; Right, 0.99; Intra-rater: Left, 0.99; Right:0.99). Standard error of measurement (SEM) for inter-and intra-rater strength ranged from 0.26-0.69 kg, SEM% ranged from 1.34-2.71% and minimal detectable change (MDC) ranged from 1.14-2.31kg.

Conclusion

Overall, high level of inter-and intra-rater reliability were demonstrated when testing maximal isometric knee flexion. Therefore, the KT360 fixed frame dynamometry system may be considered a viable tool for measuring maximal isometric contraction of the knee flexors when repeat measures are required in clinical settings.

Level of Evidence

3b.

There is more to the knee joint than just the quadriceps: A systematic review with meta-analysis and evidence gap map of hamstring strength, flexibility, and morphology in individuals with gradual-onset knee disorders

BACKGROUND

Impairments in hamstring strength, flexibility, and morphology have been associated with altered knee biomechanics, pain, and function. Determining the presence of these impairments in individuals with gradual-onset knee disorders is important and may indicate targets for assessment and rehabilitation. This systematic review aimed to synthesize the literature to determine the presence of impairments in hamstring strength, flexibility, and morphology in individuals with gradual-onset knee disorders.

METHODS

Five databases (MEDLINE, Embase, CINAHL, SPORTDiscus, and Web of Science) were searched from inception to September 2022. Only studies comparing hamstring outcomes (e.g., strength, flexibility, and/or morphology) between individuals with gradual-onset knee disorders and their unaffected limbs or pain-free controls were included. Meta-analyses for each knee disorder were performed. Outcome-level certainty was assessed using the Grading of Recommendations Assessment, Development, and Evaluation, and evidence gap maps were created.

RESULTS

Seventy-nine studies across 4 different gradual-onset knee disorders (i.e., knee osteoarthritis (OA), patellofemoral pain (PFP), chondromalacia patellae, and patellar tendinopathy) were included. Individuals with knee OA presented with reduced hamstring strength compared to pain-free controls during isometric (standard mean difference (SMD) = -0.76, 95% confidence interval (95%CI) : -1.32 to -0.21) and concentric contractions (SMD = -0.97, 95%CI : -1.49 to -0.45). Individuals with PFP presented with reduced hamstring strength compared to pain-free controls during isometric (SMD = -0.48, 95%CI : -0.82 to -0.14), concentric (SMD = -1.07, 95%CI : -2.08 to -0.06), and eccentric contractions (SMD = -0.59, 95%CI : -0.97 to -0.21). No differences were observed in individuals with patellar tendinopathy. Individuals with PFP presented with reduced hamstring flexibility when compared to pain-free controls (SMD = -0.76, 95%CI : -1.15 to -0.36). Evidence gap maps identified insufficient evidence for chondromalacia patellae and hamstring morphology across all gradual-onset knee disorders.

CONCLUSION

Our findings suggest that assessing and targeting impairments in hamstring strength and flexibility during rehabilitation may be recommended for individuals with knee OA or PFP.

Specific considerations in female patients with patellar instability: current concepts

Prior literature suggests that patellofemoral instability (PFI) is significantly more prevalent in women than in men. This higher prevalence is commonly attributed to anatomical differences between sexes, particularly with patellofemoral alignment. These differences encompass a higher rate of trochlear dysplasia (TD), patella alta, an increased Q angle, and soft tissue imbalances. In recent years, worse outcomes have been reported in female patients after patellofemoral stabilization surgery using medial patellofemoral ligament reconstruction (MPFLr) alone or in combination with a tibial tubercle osteotomy (TTO), for this reason an "à la carte" plan (addressing the individuals anatomical risk factors) could be more appropriate for female patients.

Reliability and Validity of the End Range Hamstring Strength Test with Handheld Dynamometry

Background and Purpose

Hamstring strength testing is crucial in assessing this important muscle group during rehabilitation and injury prevention. The purpose of this study was to evaluate the reliability and validity of measuring strength in a maximally lengthened position using a handheld dynamometer (HHD) compared to isokinetic testing.

Methods

Twenty healthy and active participants were recruited, and isometric strength testing was performed both on the Biodex machine and isometric end-range hamstring testing with the HHD on two occasions.

Results

Significant strong correlations (r= 0.87, p < 0.0001) were found between strength testing on the Biodex machine and the HHD for both the right and left sides. Bland-Altman plots demonstrated agreement between the two measurements. Excellent intra-rater reliability (ICC= 0.91-0.93) and moderate to good inter-rater reliability (ICC = 0.71-0.83) for the HHD test was demonstrated.

Conclusions

The HHD provides a reliable and valid alternative to isokinetic testing for assessing hamstring strength in a maximally lengthened position. This assessment can be valuable in monitoring rehabilitation progress and detecting deficits before and after returning to play. The HHD is an accessible and cost-effective option for assessing hamstring strength at long lengths in a clinical setting.

Level of evidence

3.

Hamstring Stiffness and Strength Responses to Repeated Sprints in Healthy Nonathletes and Soccer Players With Versus Without Previous Injury

BACKGROUND

The effect of 10 × 30 m repeated sprints on passive and active stiffness of semitendinosus (ST) and biceps femoris long head (BFlh), and knee flexor maximal voluntary isometric contraction (MVIC) and rate of force development (RFD), and whether athletes with previous hamstring injury have a different response, is unknown.

HYPOTHESIS

Repeated sprints would (1) increase BFlh stiffness and decrease ST stiffness and knee flexors MVIC and RFD in healthy participants; and (2) greater magnitude of response would be seen in athletes with previous hamstring injury.

STUDY DESIGN

Case series (experiment I) and case control (experiment II) study designs.

LEVEL OF EVIDENCE

Level 3.

METHODS

Healthy nonathletes attended 2 replicated sessions (experiment I, n = 18), while soccer players with (n = 38) and without (n = 67) previous hamstring injury attended 1 testing session (experiment II).

RESULTS

In both experiments, the knee flexors MVIC and RFD decreased after the sprints (P < 0.05). In experiment I, the ST and BFlh passive stiffness reduced after the sprints (P < 0.02), while a small BFlh active stiffness increase was noted (P = 0.02); however, no correlation was observed between the 2 testing sessions for the postsprint muscle stiffness responses (r = -0.07-0.44; P > 0.07). In experiment II, only an ST passive stiffness reduction was observed after the sprints (P < 0.01). No differences were noted between injured and noninjured lower limbs for any variable (P > 0.10).

CONCLUSION

Repeated sprints are likely to decrease the knee flexor's maximal and rapid strength, and to alter the hamstring stiffness in the nonathlete population. Previous hamstring injury does not apparently affect the footballer's hamstring functional and mechanical responses to repeated sprints.

CLINICAL RELEVANCE

The responses of hamstring stiffness and knee flexor strength to repeated sprints are unlikely to be associated with hamstring injury.

A Systematic Review on Quadriceps Angle in Relation to Knee Abnormalities

Previous studies on the quadriceps (Q) angle and its relation to knee problems have led to conflicting conclusions. In this comprehensive review, we evaluate recent studies on the Q angle and analyze the changes in Q angles. Specifically, we investigate the variation in Q angles when measured under the following conditions: 1) under various measurement techniques; 2) between symptomatic and non-symptomatic groups; 3) between samples of men and women; 4) unilateral versus bilateral Q angles; 5) Q angle in adolescent boys and girls. It is widely believed that Q angles are more significant in symptomatic patients than in asymptomatic individuals or that the right lower leg and left lower limb are equivalent, which is supported by little scientific data. However, research states that young adult females have higher mean Q angles than males.

Hamstrings force-length relationships and their implications for angle-specific joint torques: a narrative review

Temporal biomechanical and physiological responses to physical activity vary between individual hamstrings components as well as between exercises, suggesting that hamstring muscles operate differently, and over different lengths, between tasks. Nevertheless, the force-length properties of these muscles have not been thoroughly investigated. The present review examines the factors influencing the hamstrings’ force-length properties and relates them to in vivo function. A search in four databases was performed for studies that examined relations between muscle length and force, torque, activation, or moment arm of hamstring muscles. Evidence was collated in relation to force-length relationships at a sarcomere/fiber level and then moment arm-length, activation-length, and torque-joint angle relations. Five forward simulation models were also used to predict force-length and torque-length relations of hamstring muscles. The results show that, due to architectural differences alone, semitendinosus (ST) produces less peak force and has a flatter active (contractile) fiber force-length relation than both biceps femoris long head (BFlh) and semimembranosus (SM), however BFlh and SM contribute greater forces through much of the hip and knee joint ranges of motion. The hamstrings’ maximum moment arms are greater at the hip than knee, so the muscles tend to act more as force producers at the hip but generate greater joint rotation and angular velocity at the knee for a given muscle shortening length and speed. However, SM moment arm is longer than SM and BFlh, partially alleviating its reduced force capacity but also reducing its otherwise substantial excursion potential. The current evidence, bound by the limitations of electromyography techniques, suggests that joint angle-dependent activation variations have minimal impact on force-length or torque-angle relations. During daily activities such as walking or sitting down, the hamstrings appear to operate on the ascending limbs of their force-length relations while knee flexion exercises performed with hip angles 45–90° promote more optimal force generation. Exercises requiring hip flexion at 45–120° and knee extension 45–0° (e.g. sprint running) may therefore evoke greater muscle forces and, speculatively, provide a more optimum adaptive stimulus. Finally, increases in resistance to stretch during hip flexion beyond 45° result mainly from SM and BFlh muscles.