Electromagnetic radiation reduction using novel metamaterial for cellular applications

MXene Free Standing Films: Unlocking the Impact of Flake Sizes in Microwave Resonant Structures in Humid Environments

Microwave communication devices necessitate elements with high electrical conductivity, a property which was traditionally found in metals (e.g., copper). However, in applications such as satellite communications, metals prevent the payload from achieving lightweight and flexible characteristics. Here, we demonstrate the development of MXene film microwave resonators, leveraging MXene's high electrical conductivity and unique mechanical properties. To investigate resonant performance in humid conditions and study the effects of MXene's processing and treatment, MXene films with different flake sizes are prepared and exposed to cyclic humidity. For the large- and small-flake Ti3 C2 MXene films in cyclic humidity, the large-flake film demonstrates higher electrical conductivity, higher resonance quality factor (150 and 35 as unloaded, and loaded), and less fluctuation of performance (≈1.7% total shift in resonance frequency). Further, by implementing MXene films of two different diameters, the correlation between film size and resonant frequency is demonstrated. By introducing an active resonant configuration, the effect of MXene degradation and microwave losses can be compensated. This active feedback loop demonstrates a ≈300 times increase in the quality factor of MXene resonators. As a building block for terrestrial and satellite communication modules, MXene resonators potentiate the replacement of metals in achieving unique electrical and mechanical properties.

Specific absorption rate reduction for sub-6 frequency range using polarization dependent metamaterial with high effective medium ratio

This research study introduces a multi-layered square-shaped metamaterial (MSM) structure for the electromagnetic (EM) absorption reduction in wireless mobile devices. Usually, wireless devices, for example, a cellular phone emits radiofrequency (RF) energy to the surroundings when used it. Moreover, fast-growing wireless communication technologies that support cellular data networks have also motivated this study. Hence, the focus of the research was to reduce the Specific Absorption Rate (SAR) for the Sub-6 frequency range by designing a multi-layered and compact, 10 × 10mm² sized metamaterial structure that can be attached inside a mobile phone by avowing any overlapping with existing parts. Overall, six distinct square-shaped metamaterials were constructed on 0.25 mm thick Rogers RO3006 substrate material to reach the target of this investigation. Furthermore, numerical simulations of the proposed metamaterial electromagnetic properties and SAR reduction values were performed by adopting Computer Simulation Technology (CST) Microwave Studio 2019 software. From these simulations, the proposed MSM structure exhibited multi-band resonance frequencies accurately at 1.200, 1.458, 1.560, 1.896 GHz (at L-band), 2.268, 2.683 2.940, 3.580 GHz (at S-band) and 5.872 GHz (at C-band). Simultaneously, the proposed MSM structure was simulated in High-Frequency Structure Simulator (HFSS) to authenticate the numerical simulation data. The comparison of simulation data shows that only the primary and last resonance frequencies were reduced by 0.02 and 0.012 GHz, whereas the rest of the frequencies were increased by 0.042, 0.030, 0.040, 0.032, 0.107, 0.080, and 0.020 GHz in sequential order. In addition, the introduced MSM structure manifests left-handed behaviour at all the resonance frequencies. Nevertheless, the highest recorded SAR values were 98.136% and 98.283% at 1.560 GHz for 1 g and 10 g of tissue volumes. In conclusion, the proposed MSM met the objectives of this research study and can be employed in EM absorption reduction applications.