Immobilization of α-amylase on Cu2+ chelated poly(ethylene glycol dimethacrylate-n-vinyl imidazole) matrix via adsorption

Cibacron blue F3GA incorporated immobilized metal chelate affinity sorbent as a high efficient affinity immobilization materials for catalase enzyme

Catalase is a metalloenzyme commonly found in almost all plant and animal tissues and catalyzes the conversion of hydrogen peroxide to less reactive molecules. It is used for the elimination of hydrogen peroxide in biological, biomedical, food and textile applications. For this purpose, a novel affinity sorbent [poly(methacrylic acid- N-isopropyl acrylamide-CB-Fe³⁺, (p(MAA-NIPAAM)-CB-Fe³⁺)] for the determination and it was first developed using MAA and NIPAAM monomers. After characterization with Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), X-ray Photoelectron Spectroscopy (XPS), adsorption parameters were determined. Reusability of p(MAA-NIPAAM)-CB-Fe³⁺ sorbent was determined after by determining the appropriate desorption agent for desorption of adsorbed catalase in the developed sorbent. It was determined that catalase adsorption could be performed with 0.01 g of sorbent in 45 min. The maximum adsorption capacity for catalase adsorption was determined as 243.17 mg/g with the use of sorbent. The operational and storage stability of the immobilized catalase was found to be high as expected. The conversion of H₂O₂ can be successfully performed by the immobilized enzyme in the prepared sorbent. It has been proven that the affinity of catalase for its substrate is increased by immobilization.

The bonding nature of the chemical interaction between trypsin and chitosan based carriers in immobilization process depend on entrapped method: A review

The review article is dedicated to a comprehensive study of the chemical bond formed during the immobilization of the proteolytic enzyme pancreatic trypsin in chitosan-based polymer matrixes and its derivatives. The main focus of the study is to describe the chemical bond that causes immobilization between chitosan based carriers and trypsin. Because the nature of the chemical bond between the carrier and trypsin is a key factor in determining the area of application of the conjugate. It has been found out that after the chemical nature of functional groups, their degree of ionization, the structure of the chemical cross-linking, the medium pH and ionic strength of chitosan are modified, the mechanism of trypsin immobilization is affected. As a result, the attraction enzyme to the matrix occurs due to polar covalent and hydrogen bonds, as well as electrostatic, hydrophobic, Van der Waals forces. The collected research works on the immobilization of trypsin on chitosan-based carriers have been systematized in the paper and shown schematically in subsystems according to the type of chemical interaction. It has been shown that the immobilization of trypsin on chitosan based matrixes occur more often due to the covalent and hydrogen bonds between the protein and the carrier.

Preparation of regenerable magnetic nanoparticles for cellulase immobilization: Improvement of enzymatic activity and stability

To obtain regenerable magnetic nanoparticles, triethoxy(3-isocyanatopropyl)silane and iminodiacetic acid (IZ) were used as the starting material and immobilized on Fe₃ O₄ nanoparticles. Copper ions (Cu²⁺ ions) were loaded on the Fe-IZ nanoparticles and used for cellulase immobilization. The support was characterized by spectroscopic methods (FTIR, NMR) and thermogravimetric analysis, transmission electron microscopy, scanning electron microscope, X-ray diffraction, energy dispersive X-ray analysis, and vibrating sample magnetometer techniques. As a result of experiments, the amount of protein bound to immobilized cellulase (Fe-IZ-Cu-E) and cellulase activity was found to be 33.1 mg/g and 154 U/g at pH 5, 50°C, for 3 h. The results indicated that the free cellulase had kept only 50% of its activity after 2 h, while the Fe-IZ-Cu-E was observed to be around 77%, at 60°C. It was found that the immobilized cellulase maintained 93% of its initial catalytic activity after its sixth use. Furthermore, the Fe-IZ-Cu-E retained about 75% of its initial activity after 28 days of storage. To reuse the support material (Fe-IZ-Cu), it was regenerated by thorough washing with ammonia or imidazole.

Immobilization of Laccase on Magnetic Chelator Nanoparticles for Apple Juice Clarification in Magnetically Stabilized Fluidized Bed

The juice clarification, one of the key steps in juice processing, suffers from haze formation that results from residual phenolic compounds. In this study, laccase was immobilized on metal-chelated magnetic silica nanoparticles and used for continuous juice clarification in a magnetically stabilized fluidized bed (MSFB) assisted by alternating magnetic field. Furthermore, a new combination of laccase catalysis and microfiltration was developed for the juice clarification. Immobilized laccase provided high relative activity within broader ranges of pH and temperature compared to the free enzyme. Magnetic immobilized laccase exhibited the best reaction rate of 12.1 μmol g^–1 min^–1 for catechol oxidation under the alternating magnetic field of 400 Hz, 60 Gs. No activity loss occurred in immobilized laccase after 20 h continuous operation of juice treatment in MSFB under an alternating magnetic field. Combined with microfiltration after treatment with immobilized laccase, the color of apple juice was decreased by 33.7%, and the light transmittance was enhanced by 20.2%. Furthermore, only 16.3% of phenolic compounds and 15.1% of antioxidant activity was reduced for apple juice after the clarification. By this combination strategy, the apple juice possessed good freeze–thaw and thermal stability.

Mesoporous Ionically Tagged Cross-Linked Poly(vinyl imidazole)s as Novel and Reusable Catalysts for the Preparation of N-Heterocycle Spiropyrans

Herein, two novel mesoporous cross-linked poly(vinyl imidazole)s with sulfonic acid tags, [PVI-SO3H]Cl (1) and [PVI-SO3H]FeCl4 (2), were prepared and characterized by a variety of techniques such as Fourier transform infrared spectroscopy, scanning electron microscopy, elemental mapping, energy dispersive X-ray analysis, transmission electron microscopy, thermal gravimetry, derivative thermal gravimetry, and N2 adsorption-desorption isotherms (Brunauer-Emmett-Teller). In addition, magnetic properties of poly(vinyl imidazole) sulfonic acid iron(IV) chloride [PVI-SO3H]FeCl4 (2) as an ionically tagged magnetic polymer were investigated using a vibrating sample magnetometer. The presented polymers, [PVI-SO3H]Cl (1) and [PVI-SO3H]FeCl4 (2), were successfully applied as reusable and efficient catalysts for the preparation of N-heterocycle spiropyrans. The described catalysts were recycled and reused with a marginal decrease in their catalytic activities. The desired products were prepared under mild and green conditions. The structures of the obtained products were confirmed by various analysis techniques.

Enhanced starch hydrolysis using α-amylase immobilized on cellulose ultrafiltration affinity membrane

In order to prepare ultrafiltration membranes possessing biocatalytic properties, α-amylase has been immobilized on cellulose membranes. Enzyme immobilization was based on a covalent bonding between chitosan and a surface of cellulose membrane, followed by an attachment of Cibacron Blue F3G-A dye as affinity ligand. Various factors affecting the immobilization process, such as enzyme concentration, pH of modifying solution, zeta-potential of membrane surface, and stability of immobilized enzyme were studied. The applicability of immobilized α-amylase has been investigated in ultrafiltration processes. The immobilization of α-amylase on membrane surface allows to increase the value of mass transfer coefficient and to decrease the concentration polarization effect during ultrafiltration of starch solutions. The enzyme layer on the membrane surface prevents a rapid increase of starch concentration due to the amylase hydrolysis of starch in the boundary layer. The presented affinity immobilization technique allows also for the regeneration of membranes from inactivated enzyme.

Radiofrequency treatment enhances the catalytic function of an immobilized nanobiohybrid catalyst

Biocatalysis, the use of enzymes in chemical transformation, has undergone intensive development for a wide range of applications. As such, maximizing the functionality of enzymes for biocatalysis is a major priority to enable industrial use. To date, many innovative technologies have been developed to address the future demand of enzymes for these purposes, but maximizing the catalytic activity of enzymes remains a challenge. In this study, we demonstrated that the functionality of a nanobiocatalyst could be enhanced by combining immobilization and radiofrequency (RF) treatment. Aminopeptidase PepA-encapsulating 2 nm platinum nanoparticles (PepA-PtNPs) with the catalytic activities of hydrolysis and hydrogenation were employed as multifunctional nanobiocatalysts. Immobilizing the nanobiocatalysts in a hydrogel using metal chelation significantly enhanced their functionalities, including catalytic power, thermal-stability, pH tolerance, organic solvent tolerance, and reusability. Most importantly, RF treatment of the hydrogel-immobilized PepA-PtNPs increased their catalytic power by 2.5 fold greater than the immobilized PepA. Our findings indicate that the catalytic activities and functionalities of PepA-PtNPs are greatly enhanced by the combination of hydrogel-immobilization and RF treatment. Based on our findings, we propose that RF treatment of nanobiohybrid catalysts immobilized on the bulk hydrogel represents a new strategy for achieving efficient biocatalysis.

Silver nanoparticle (AgNPs) doped gum acacia-gelatin-silica nanohybrid: an effective support for diastase immobilization

An effective carrier matrix for diastase alpha amylase immobilization has been fabricated by gum acacia-gelatin dual templated polymerization of tetramethoxysilane. Silver nanoparticle (AgNp) doping to this hybrid could significantly enhance the shelf life of the impregnated enzyme while retaining its full bio-catalytic activity. The doped nanohybrid has been characterized as a thermally stable porous material which also showed multipeak photoluminescence under UV excitation. The immobilized diastase alpha amylase has been used to optimize the conditions for soluble starch hydrolysis in comparison to the free enzyme. The optimum pH for both immobilized and free enzyme hydrolysis was found to be same (pH=5), indicating that the immobilization made no major change in enzyme conformation. The immobilized enzyme showed good performance in wide temperature range (from 303 to 323 K), 323 K being the optimum value. The kinetic parameters for the immobilized, (K(m)=10.30 mg/mL, V(max)=4.36 μmol mL(-1)min(-1)) and free enzyme (K(m)=8.85 mg/mL, V(max)=2.81 μmol mL(-1)min(-1)) indicated that the immobilization improved the overall stability and catalytic property of the enzyme. The immobilized enzyme remained usable for repeated cycles and did not lose its activity even after 30 days storage at 40°C, while identically synthesized and stored silver undoped hybrid lost its ~31% activity in 48 h. Present study revealed the hybrids to be potentially useful for biomedical and optical applications.

Magnetic mesoporous silica nanoparticles: fabrication and their laccase immobilization performance

Newly large-pore magnetic mesoporous silica nanoparticles (MMSNPs) with wormhole framework structures were synthesized for the first time by using tetraethyl orthosilicate as the silica source and amine-terminated Jeffamine surfactants as template. Iminodiacerate was attached on these MMSNPs through a silane-coupling agent and chelated with Cu(2+). The Cu(2+)-chelated MMSNPs (MMSNPs-CPTS-IDA-Cu(2+)) showed higher adsorption capacity of 98.1 mg g(-1)-particles and activity recovery of 92.5% for laccase via metal affinity adsorption in comparison with MMSNPs via physical adsorption. The Michaelis constant (K(m)) and catalytic constant (k(cat)) of laccase immobilized on the MMSNPs-CPTS-IDA-Cu(2+) were 3.28 mM and 155.4 min(-1), respectively. Storage stability and temperature endurance of the immobilized laccase on MMSNPs-CPTS-IDA-Cu(2+) increased significantly, and the immobilized laccase retained 86.6% of its initial activity after 10 successive batch reactions operated with magnetic separation.

The use of polyethyleneglycolmethacrylate-co-vinylimidazole (PEGMA-co-VI) microspheres for the removal of nickel(II) and chromium(VI) ions

The polyethyleneglycolmethacrylate-co-vinylimidazole (PEGMA-VI) copolymers, that can be used in heavy metal removal applications, were synthesized and characterized; and their use as sorbents in heavy metal removal was investigated. It was determined that the ligand vinylimidazole was successfully inserted into the polymer structure. Then, chromium (Cr(VI)) and nickel (Ni(II)) ions were used as model species to investigate the usability of the obtained microspheres in heavy metal removal. The effects of pH of the adsorption medium, initial concentration of the metal ions and VI content of PEGMA-VI microspheres were investigated as the effective parameters on the adsorption capacities of the microspheres. The adsorption rate of the microspheres was also investigated for determination of the optimum adsorption time which is the required time for maximum adsorption capacity. The adsorption capacities under optimum conditions were also determined. The order of adsorption affinities of PEGMA-VI microspheres with respect to the used metals was determined by competitive adsorption studies. According to the obtained results, the highest adsorption affinity of the PEGMA-VI microspheres was towards Cr(VI) ions, the adsorption affinity was less for Ni(II) and the least affinity was towards Cu(II) ions. The adsorption-desorption studies showed that the microspheres were reusable without a significant decrease in the ion adsorption capacities.

Preparation and characterization of polyethyleneglycolmethacrylate (PEGMA)-co-vinylimidazole (VI) microspheres to use in heavy metal removal

Polyethyleneglycolmethacrylate (PEGMA) and vinylimidazole (VI) were used in order to obtain microspheres of PEGMA-VI copolymers that can be used in heavy metal removal applications. The obtained copolymers were characterized and their use as sorbents in heavy metal removal was investigated. In the first part of the study, PEGMA-VI microspheres were prepared by suspension polymerization method. The obtained swellable microspheres with 10-50 microm average diameter did not have permanent porosity according to the morphological and physicochemical determinations. The sizes of microspheres became smaller with increasing VI and cross-linker ethyleneglycoldimethacrylate (EGDMA) contents and increasing agitation rate. The VI content, EGDMA ratio, pH and ionic strength were determined as the effective parameters on the swelling behavior of PEGMA-VI microspheres. In the second part of the study, Cu(II) ions were used as a model species in order to investigate the usability of the obtained PEGMA-VI microspheres in heavy metal removal. Adsorption capacities under optimum conditions were determined. The Cu(II) ion adsorption capacity increased by increasing the initial Cu(II) ion concentration, and it reached the maximum value (i.e., 30 mg Cu(II)/g PEGMA-VI microspheres) at 400 mg Cu(II)/L initial Cu(II) ion concentration under the determined optimum conditions. Microspheres were found to be reusable after desorption for several times.

Performance evaluation of a silk protein-based matrix for the enzymatic conversion of tyrosine to L-DOPA

L-DOPA (3,4-dihydroxyphenyl-L-alanine), one of the most important intermediates in the melanin biosynthesis pathway, is used for the treatment of Parkinson's disease. With a view of developing a cheaper and more effective method for the bioconversion of tyrosine to L-DOPA, the potential and performance of a novel fibrous matrix prepared from Bombyx mori silk protein fibroin were evaluated for the immobilization of tyrosinase. Cross-linkage between fibroin and tyrosinase using glutaraldehyde was evident from Fourier transform infra red spectroscopy. Maximum product formation occurred when 1000 U enzyme was immobilized on 20 mg fibroin. The optimum conditions for maximal L-DOPA production using immobilized tyrosinase were 40 degrees C and pH 5.5, conditions that caused a 50% loss of free enzyme activity. Immobilized tyrosinase also showed to have a higher degree of stability during storage and it retained 80% of its original activity after repeated reuses. The efficiency of this immobilized tyrosinase system to produce L-DOPA was high, as evident from a high effectiveness factor, between 0.7 and 0.8, thereby making this method feasible for the large-scale production of L-DOPA.

Trypsin immobilization by direct adsorption on metal ion chelated macroporous chitosan-silica gel beads

Silica gel bead coated with macroporous chitosan layer (CTS-SiO(2)) was prepared, and the metal immobilized affinity chromatographic (IMAC) adsorbents could be obtained by chelating Cu(2+), Zn(2+), Ni(2+) ions, respectively on CTS-SiO(2), and trypsin could be adsorbed on the IMAC adsorbent through metal-protein interaction forces. Batch adsorption experiments show that adsorption capacity for trypsin on these IMAC adsorbent variated with change of pH. The maximal adsorption reached when the solution was in near neutral pH in all three IMAC adsorbents. Adsorption isothermal curve indicated that maximal adsorption capacity could be found in the Cu(2+)-CTS-SiO(2) with the value of 4980+/-125 IUg(-1) of the adsorbent, while the maximal adsorption capacity for trypsin on Zn(2+) and Ni(2+) loaded adsorbent was 3762+/-68 IUg(-1) and 2636+/-53 IUg(-1), respectively. Trypsin immobilized on the IMAC beads could not be desorbed by water, buffer and salt solution if the pH was kept in the range of 5-10, and could be easily desorbed from the IMAC beads by acidic solution and metal chelating species such as EDTA and imidazole. The effect of chelated metal ions species on CTS-SiO(2) beads on the activity and stability of immobilized trypsin was also evaluated and discussed. Trypsin adsorbed on Zn-IMAC beads retained highest amount of activity, about 78% of total activity could be retained. Although the Cu-IMAC showed highest affinity for trypsin, only 25.4% of the calculated activity was found on the beads, while the activity recovery found on Ni-IMAC beads was about 37.1%. A remarkable difference on stability of trypsin immobilized on three kinds of metal ion chelated beads during storage period was also found. Activity of trypsin on Cu-IMAC decreased to 24% of its initial activity after 1-week storage at 4 degrees C, while about 80% activity was retained on both Ni-IMAC and Zn-IMAC beads. Trypsin immobilized on Zn-CTS-SiO(2) could effectively digest BSA revealed by HPLC peptide mapping.