Catechol immobilized on crosslinked polystyrene resins by grafting or copolymerization: Incidence on metal ions adsorption

CO2 Capture: A Comprehensive Review and Bibliometric Analysis of Scalable Materials and Sustainable Solutions

The greenhouse effect and global warming, driven by the accumulation of pollutants, such as sulfur oxides (SOx), nitrogen oxides (NOx), and CO2, are primarily caused by the combustion of fossil fuels and volcanic eruptions. These phenomena represent an international crisis that negatively impacts human health and the environment. Several studies have reported novel carbon capture, utilization, and storage (CCUS) technologies, promising solutions. Notable methods include chemical absorption using solvents, and the development of functionalized porous materials, such as MCM-41, impregnated with amines like polyethyleneimine. These technologies have demonstrated high capture capacity and thermal stability; however, they face challenges related to recyclability and high operating costs. In parallel, biodegradable polymers and hydrogels present sustainable alternatives with a lower environmental impact, although their industrial scalability remains limited. This review comprehensively analyzes CO2 capture methods, focusing on silica-based porous supports, polymers, hydrogels, and emerging techniques, like CCUS and MOFs, while including traditional methods and a bibliometric analysis to update the field's scientific dynamics. With increasing investigations focused on developing new CCUS technologies, this study highlights a growing interest in eco-friendly alternatives. A bibliometric analysis of 903 articles published between 2010 and 2024 provides an overview of current research on environmentally friendly carbon capture technologies. Countries such as the United States, the United Kingdom, and India are leading research efforts in this field, emphasizing the importance of scientific collaboration. Despite these advancements, implementing these technologies in industrial sectors with high greenhouse gas emissions remains scarce. This underscores the need for public policies and financing to promote their development and application in these sectors. Future research should prioritize materials with high capture capacity, efficient transformation, and valorization of CO2 while promoting circular economy approaches and decarbonizing challenging sectors, such as energy and transportation. Integrating environmentally friendly materials, energy optimization, and sustainable strategies is essential to position these technologies as key tools in the fight against climate change.

Synthesis, characterization, and assessment of novel sulfonated polynorbornene dicarboximides as adsorbents for the removal of heavy metals from water

The occurrence of heavy metals in the natural aquatic systems arising from anthropogenic sources is an issue of global and environmental concern because of their extremely harmful effects to living beings even in rather low concentrations. The synthesis and ring-opening metathesis polymerization (ROMP) of novel norbornene dicarboximides bearing highly aromatic pendant groups, specifically, N-4-tritylphenyl-norbornene-5,6-dicarboximide (2a) and N-2,4,6-(triphenyl)phenyl-norbornene-5,6-dicarboximide (2b), their hydrogenation and further polymer sulfonation to render them adsorbents for the uptake of heavy metal ions from water is reported in this study. The macromolecules were characterized by means of FT-IR, ¹H NMR, and thermal analysis, among others. A thoroughly kinetic and isothermal study of adsorption in single and ternary aqueous solutions of Pb²⁺, Cd²⁺, and Ni²⁺ was performed considering several experimental variables for instance initial metal concentration, contact time and solution pH. In general, the experimental data were adjusted more efficiently to the pseudo-second order kinetic model and to the Freundlich isotherm model, respectively. The maximum removal amounts were found to be 55.7 mg/g for Pb²⁺, 33.9 mg/g for Cd²⁺, and 10.2 mg/g for Ni²⁺ in the sulfonated trityl-bearing polymer 5a while those found for the sulfonated triphenyl-bearing polymer 5b were 31.5 mg/g for Pb²⁺, 26.6 mg/g for Cd²⁺, and 7.0 mg/g for Ni²⁺, respectively. The higher heavy metal removal capacity of polymer 5a was attributed to its also higher degree of sulfonation. The outcomes indicate that these novel sulfonic acid containing polymer-based adsorbents are effective for the uptake of heavy metallic elements from water.

Removal of Cu(II) from aqueous solution using synthetic poly(catechol-diethylenetriamine-p-phenylenediamine) particles

A novel poly(catechol-diethylenetriamine-pphenylenediamine)(PCEA) adsorbent was synthesized in methanol, with chelating groups supplied by catechol and diethylenetriamine, which showed a strong removal performance and efficient adsorption toward Cu(II) ions in aqueous solution. The adsorbent was characterized by scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). Besides, factors such as adsorbent dosage, pH, initial ionic and metal concentrations, contact time, and temperature on the adsorption of Cu(II) were studied. The data revealed that the adsorption followed a pseudo-second order kinetic model and the adsorption rate was influenced by the intra-particle diffusion. Furthermore, the adsorption process followed the Langmuir isotherm model, and the maximum adsorption capacity (Qm) was 44.2mg/g at 298K in simulated wastewater. The value of ΔG (kJ/mol) and ΔH (kJ/mol) also demonstrated that the adsorption process was spontaneous and endothermic. Studies revealed that PCEA particles were powerful and stable for the removal of Cu(II) in water, and it could be directly applied to the Cu(II)-contaminated water.

Azobenzenes and catalysis

Azobenzene is the most extensively used class of chromophore in a large variety of applications.

Copper removal using bio-inspired polydopamine coated natural zeolites

Herein, for the first time, natural clinoptilolite-rich zeolite powders modified with a bio-inspired adhesive, polydopamine (PDA), have been systematically studied as an adsorbent for copper cations (Cu(II)) from aqueous solution. Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and thermogravimetric analysis (TGA) revealed successful grafting of PDA onto the zeolite surface. The effects of pH (2-5.5), PDA treatment time (3-24h), contact time (0 to 24h) and initial Cu(II) ion concentrations (1 to 500mgdm(-3)) on the adsorption of Cu(II) ions were studied using atomic absorption spectroscopy (AAS) and neutron activation analysis (NAA). The adsorption behavior was fitted to a Langmuir isotherm and shown to follow a pseudo-second-order reaction model. The maximum adsorption capacities of Cu(II) were shown to be 14.93mgg(-1) for pristine natural zeolite and 28.58mgg(-1) for PDA treated zeolite powders. This impressive 91.4% increase in Cu(II) ion adsorption capacity is attributed to the chelating ability of the PDA on the zeolite surface. Furthermore studies of recyclability using NAA showed that over 50% of the adsorbed copper could be removed in mild concentrations (0.01M or 0.1M) of either acid or base.

Polymer composition and substrate influences on the adhesive bonding of a biomimetic, cross-linking polymer

Hierarchical biological materials such as bone, sea shells, and marine bioadhesives are providing inspiration for the assembly of synthetic molecules into complex structures. The adhesive system of marine mussels has been the focus of much attention in recent years. Several catechol-containing polymers are being developed to mimic the cross-linking of proteins containing 3,4-dihydroxyphenylalanine (DOPA) used by shellfish for sticking to rocks. Many of these biomimetic polymer systems have been shown to form surface coatings or hydrogels; however, bulk adhesion is demonstrated less often. Developing adhesives requires addressing design issues including finding a good balance between cohesive and adhesive bonding interactions. Despite the growing number of mussel-mimicking polymers, there has been little effort to generate structure-property relations and gain insights on what chemical traits give rise to the best glues. In this report, we examine the simplest of these biomimetic polymers, poly[(3,4-dihydroxystyrene)-co-styrene]. Pendant catechol groups (i.e., 3,4-dihydroxystyrene) are distributed throughout a polystyrene backbone. Several polymer derivatives were prepared, each with a different 3,4-dihyroxystyrene content. Bulk adhesion testing showed where the optimal middle ground of cohesive and adhesive bonding resides. Adhesive performance was benchmarked against commercial glues as well as the genuine material produced by live mussels. In the best case, bonding was similar to that obtained with cyanoacrylate "Krazy Glue". Performance was also examined using low- (e.g., plastics) and high-energy (e.g., metals, wood) surfaces. The adhesive bonding of poly[(3,4-dihydroxystyrene)-co-styrene] may be the strongest of reported mussel protein mimics. These insights should help us to design future biomimetic systems, thereby bringing us closer to development of bone cements, dental composites, and surgical glues.