Diosgenin-selective molecularly imprinted pearls prepared by wet phase inversion

Molecularly imprinted polymers (MIPs) as efficient catalytic tools for the oxidative degradation of 4-nonylphenol and its by-products

Water pollution is a current global concern caused by emerging pollutants like nonylphenol (NP). This endocrine disruptor cannot be efficiently removed with traditional wastewater treatment plants (WTPs). Therefore, this work aimed to evaluate the adsorption influence of molecularly imprinted polymers (MIPs) on the oxidative degradation (ozone and ultraviolet irradiations) of 4-nonylphenol (4-NP) and its by-products as a coadjuvant in WTPs. MIPs were synthesized and characterized; the effect of the degradation rate under system operating conditions was studied by Box-Behnken response surface design of experiments. The variables evaluated were 4-NP concentration, ozone exposure time, pH, and MIP amount. Results show that the MIPs synthesized by co-precipitation and bulk polymerizations obtained the highest retention rates (> 90%). The maximum adsorption capacities for 4-NP were 201.1 mg L-1 and 500 mg L-1, respectively. The degradation percentages under O3 and UV conditions reached 98-100% at 120 s of exposure at different pHs. The degradation products of 4-NP were compounds with carboxylic and ketonic acids, and the MIP adsorption was between 50 and 60%. Our results present the first application of MIPs in oxidation processes for 4-NP, representing starting points for the use of highly selective materials to identify and remove emerging pollutants and their degradation by-products in environmental matrices.

Simultaneous phase-inversion and imprinting based sensor for highly sensitive and selective detection of bisphenol A

A novel recognition element of molecularly imprinted films (MIFs) was synthesized by wet phase inversion (WPI) on the surface of Ti/TiO₂ electrode for highly selective and sensitive electrochemical detection of bisphenol A (BPA). The Ti/TiO₂/MIFs sensor was constructed by casting the precursor poly(acrylonitrile-co-acrylic acid) (p(AN-co-AA)) in dimethyl sulfoxide containing template molecule BPA onto the electrode and then immersing into water, resulting in simultaneous p(AN-co-AA) precipitation and BPA imprinting via the facile WPI. The imprinted sites could selectively rebind BPA through hydrogen bonding and hence lead to the equalizing current increase in amperometric detection, by which the BPA could be sensed electrochemically. Accordingly, the Ti/TiO₂/MIFs sensor offered a favorable linearity within the wide range over five orders of magnitude (4.4nM-0.13mM), and a low detection limit down to 1.3nM. Excellent recognition selectivity for BPA was also attained over its analogues. Furthermore, this sensor was successfully applied to detect BPA in seawater and paper cup samples, and high recoveries were 86-110% with low relative standard deviations of 1.3-3.2%. By using BPA as a model, the MIFs-based method may provide a facile, rapid, and cost-effective way for ultrasensitive electrochemical measurements of various targeted compounds with good applicability to WPI.

Fouling Resistant CA/PVA/TiO2 Imprinted Membranes for Selective Recognition and Separation Salicylic Acid from Waste Water

Highly selective cellulose acetate (CA)/poly (vinyl alcohol) (PVA)/titanium dioxide (TiO₂) imprinted membranes were synthesized by phase inversion and dip coating technique. The CA blend imprinted membrane was synthesized by phase inversion technique with CA as membrane matrix, polyethyleneimine (PEI) as the functional polymer, and the salicylic acid (SA) as the template molecule. The CA/PVA/TiO₂ imprinted membranes were synthesized by dip coating of CA blend imprinted membrane in PVA and different concentration (0.05, 0.1, 0.2, 0.4 wt %) of TiO₂ nanoparticles aqueous solution. The SEM analysis showed that the surface morphology of membrane was strongly influenced by the concentration of TiO₂ nanoparticles. Compared with CA/PVA-TiO₂(0.05, 0.1, 0.2%)-MIM, the CA/PVA-TiO₂(0.4%)-MIM possessed higher membrane flux, kinetic equilibrium adsorption amount, binding capacity and better selectivity for SA. It was found that the pseudo-second-order kinetic model was studied to describe the kinetic of CA/PVA-TiO₂(0.2%)-MIM judging by multiple regression analysis. Adsorption isotherm analysis indicated that the maximum adsorption capacity for SA were 24.43 mg g^-1. Moreover, the selectivity coefficients of CA/PVA-TiO₂ (0.2%)-MIM for SA relative to p-hydroxybenzoic acid (p-HB) and methyl salicylate (MS) were 3.87 and 3.55, respectively.

Molecularly Imprinted Membranes: Past, Present, and Future

More than 80 years ago, artificial materials with molecular recognition sites emerged. The application of molecular imprinting to membrane separation has been studied since 1962. Especially after 1990, such research has been intensively conducted by membranologists and molecular imprinters to understand the advantages of each technique with the aim of constructing an ideal membrane, which is still an active area of research. The present review aims to be a substantial, comprehensive, authoritative, critical, and general-interest review, placed at the cross section of two broad, interconnected, practical, and extremely dynamic fields, namely, the fields of membrane separation and molecularly imprinted polymers. This review describes the recent discoveries that appeared after repeated and fertile collisions between these two fields in the past three years, to which are added the worthy acknowledgments of pioneering discoveries and a look into the future of molecularly imprinted membranes. The review begins with a general introduction in membrane separation, followed by a short theoretical section regarding the basic principles of mass transport through a membrane. Following these general aspects on membrane separation, two principles of obtaining polymeric materials with molecular recognition properties are reviewed, namely, molecular imprinting and alternative molecular imprinting, followed the methods of obtaining and practical applications for the particular case of molecularly imprinted membranes. The review continues with insights into molecularly imprinted nanofiber membranes as a promising, highly optimized type of membrane that could provide a relatively high throughput without a simultaneous unwanted reduction in permselectivity. Finally, potential applications of molecularly imprinted membranes in a variety of fields are highlighted, and a look into the future of membrane separations is offered.