An effective approach for fast selective separation of Cr(VI) from water by ion-imprinted polymer grafted on the electro-spun nanofibrous mat of functionalized polyacrylonitrile

Advanced nanofibers for water treatment: Unveiling the potential of electrospun polyacrylonitrile membranes

The challenges pertaining to the potable water scarcity and pollution motivates us to envision innovative strategies. Industrial wastewater containing hazardous heavy metals, synthetic dyes, and oil exacerbates the pursuit of clean drinking water. Among the array of available technologies, electrospun nanofiber membranes have garnered attention due to their efficiency, high surface-to-volume ratio, cost-effectiveness, scalability, and multifunctionality. These membranes possess distinct physical and chemical attributes that position them as ideal solutions to water purification challenges. Their versatility enables effective contaminant removal through filtration, adsorption, and chemical interactions. Polyacrylonitrile (PAN) emerges as a frontrunner among electrospun polymers due to its affordability, remarkable physical and chemical characteristics, and the ease of production. Research efforts have been dedicated to the study of electrospun PAN membranes, exploring modifications in terms of the functionalization of PAN molecular chain, incorporation of appropriate nanoparticles, and composition with other functional polymers. Parameters such as functional groups, hydrophilicity, mechanical properties, porosity, pore structure, reusability, sustainability, zeta potential, and operational conditions significantly influence the performance of electrospun PAN membranes in treating the contaminated water. Despite progress, challenges surrounding fouling, toxicity, scalability, selectivity, and production costs ought to be addressed strategically to enhance their practicality and real-world viability. This review comprehensively scrutinizes the current landscape of available electrospun PAN membranes in water treatment encompassing diverse range of synthesized entities and experimental outcomes. Additionally, the review delves into various approaches undertaken to optimize the performance of electrospun PAN membranes while proposing potential strategies to overcome the existing hindrances. By carefully analyzing the parameters that impact the performance of these membranes, this overview offers invaluable guidelines for researchers and engineers, thus empowering them to design tailored electrospun nanofiber membranes for specific water purification applications. As the innovative research continues and strategic efforts address the current challenges, these membranes can play a pivotal role in enhancing water quality, mitigating water scarcity, and contributing to environmental sustainability. The widespread application of electrospun nanofiber membranes in water treatment has the potential to create a lasting positive impact on global water resources and the environment. A dedicated effort towards their implementation will undoubtedly mark a crucial step towards a more sustainable and water-secure future.

Cutting-Edge Sensor Design: MIP Nanoparticle-Functionalized Nanofibers for Gas-Phase Detection of Limonene in Predictive Agriculture

As population growth and climate change intensify pressures on agriculture, innovative strategies are vital for ensuring food security, optimizing resources, and protecting the environment. This study introduces a novel approach to predictive agriculture by utilizing the unique properties of terpenes, specifically S(-)-limonene, emitted by plants under stress. Advanced sensors capable of detecting subtle limonene variations offer the potential for early stress diagnosis and precise crop interventions. This research marks a significant leap in sensor technology, introducing an innovative active sensing material that combines molecularly imprinted polymer (MIP) technology with electrospinning. S(-)-limonene-selective MIP nanoparticles, engineered using methacrylic acid (MAA) and ethylene glycol dimethacrylate (EGDMA), were synthesized with an average diameter of ~160 nm and integrated into polyvinylpyrrolidone (PVP) nanofibers reinforced with multiwall carbon nanotubes (MWCNTs). This design produced a conductive and highly responsive sensing layer. The sensor exhibited rapid stabilization (200 s), a detection limit (LOD) of 190 ppb, and a selectivity index of 73% against similar monoterpenes. Optimal performance was achieved at 55% relative humidity, highlighting environmental conditions' importance. This pioneering use of polymeric MIP membranes in chemiresistive sensors for limonene detection opens new possibilities for monitoring VOCs, with applications in agricultural stress biomarkers, contaminant detection, and air quality monitoring, advancing precision agriculture and environmental protection.

Nanofibrous Conductive Sensor for Limonene: One-Step Synthesis via Electrospinning and Molecular Imprinting

Detecting volatile organic compounds (VOCs) emitted from different plant species and their organs can provide valuable information about plant health and environmental factors that affect them. For example, limonene emission can be a biomarker to monitor plant health and detect stress. Traditional methods for VOC detection encounter challenges, prompting the proposal of novel approaches. In this study, we proposed integrating electrospinning, molecular imprinting, and conductive nanofibers to fabricate limonene sensors. In detail, polyvinylpyrrolidone (PVP) and polyacrylic acid (PAA) served here as fiber and cavity formers, respectively, with multiwalled carbon nanotubes (MWCNT) enhancing conductivity. We developed one-step monolithic molecularly imprinted fibers, where S(-)-limonene was the target molecule, using an electrospinning technique. The functional cavities were fixed using the UV curing method, followed by a target molecule washing. This procedure enabled the creation of recognition sites for limonene within the nanofiber matrix, enhancing sensor performance and streamlining manufacturing. Humidity was crucial for sensor working, with optimal conditions at about 50% RH. The sensors rapidly responded to S(-)-limonene, reaching a plateau within 200 s. Enhancing fiber density improved sensor performance, resulting in a lower limit of detection (LOD) of 137 ppb. However, excessive fiber density decreased accessibility to active sites, thus reducing sensitivity. Remarkably, the thinnest mat on the fibrous sensors created provided the highest selectivity to limonene (Selectivity Index: 72%) compared with other VOCs, such as EtOH (used as a solvent in nanofiber development), aromatic compounds (toluene), and two other monoterpenes (α-pinene and linalool) with similar structures. These findings underscored the potential of the proposed integrated approach for selective VOC detection in applications such as precision agriculture and environmental monitoring.

Synthesis of graphite/rGO-modified fungal hyphae for chromium (VI) bioremediation process

Bioremediation is a promising technology that can eliminate the drawbacks of conventional treatment methods in removing harmful toxic metals including chromium(VI). Therefore, in this study, fungal hyphae modified with graphite and reduced graphene oxide were synthesized and assessed for their potential to bioremediate heavy metals for the first time in the literature. The effects of the carbon-based materials on microbial structure were characterized using scanning electron microscopy analysis. Thermogravimetric, RAMAN, X-ray diffraction, and enzymatic analyzes were performed to determine the role of functional groups. In addition, batch adsorption experiments utilizing response surface methodology were conducted to optimize operating parameters such as time (1-11 h), chromium (10-50 mg/L), and graphite/reduced graphene oxide (0.1-1 g/L). The maximum adsorption capacity with the graphene fungal hyphae was determined to be 568 mg.g-1, which is 9.7 times that of the crude fungal hyphae. The Cr(VI) removal for fungal hyphae-graphite and fungal hyphae-reduced graphene oxide biocomposites was 98.25% and 98.49%, respectively. The isothermal and kinetic results perfectly matched the 2nd order pseudo-model and Langmuir model in terms of the nature of the adsorption process. The laboratory scale test results indicate that fungal hyphae modified with graphite and reduced graphene oxide have a high adsorption capacity, suitable for the removal of chromium (VI) from wastewater.

Cr(VI) anion-imprinted polymer synthesized on mesoporous silicon via synergistic action of bifunctional monomers for precise identification and separation of Cr(VI) from aqueous solution by fixed-bed adsorption

The novel Cr(VI) anion-imprinted polymer (Cr(VI)-IIP) was prepared by a surface imprinting technique with bifunctional monomers pre-assembly system based on mesoporous silicon (SBA-15). The synthesized Cr(VI)-IIP was characterized by Fourier transmission infrared spectra (FT-IR), energy dispersive spectrometer (EDS), scanning electron microscope (SEM), transmission electron microscope (TEM), X-ray powder diffractometer, N₂ adsorption-desorption and thermogravimetric analysis (TGA), proving to be with a highly ordered mesoporous structure, as well as favorable thermal stability. The saturated adsorption amount was 96.32 mg/g, which was 2.7 times higher than that of non-imprinted polymer (NIP). Kinetic experiments showed that the adsorption equilibrium state was obtained within 70 min. In addition, in the selectivity experiments, Cr(VI)-IIP exhibited strong specific recognition ability for Cr(VI) and could realize the separation of Cr(VI) and Cr(III) from an aqueous solution. The dynamic adsorption experiments exhibited that the dynamic adsorption efficiency of Cr(VI)-IIP was as high as 71.57%. Meanwhile, the dynamic regeneration experiments showed that the adsorption amount of Cr(VI)-IIP did not decrease significantly after repeating for five times. All of the findings suggested that Cr(VI)-IIP could achieve precise identification as well as efficient separation of Cr(VI) from aqueous solution.

Preparation of a New Solid-Phase Microextraction Fiber Based on Molecularly Imprinted Polymers for Monitoring of Phenobarbital in Urine Samples

A simple solid-phase microextraction technique using molecularly imprinted polymers (MIP-SPME) was prepared to monitor phenobarbital in urine samples. In this technique, the fiber was prepared via insertion of the modified stainless-steel wire in the reaction solution including 3-aminopropyltriethoxysilane and tetraethyl orthosilicate in the presence of an acidic catalyst (acetic acid). The fabricated MIP-SPME fiber was utilized to selectively extract phenobarbital from urine samples and prepare it for detection through high-performance liquid chromatography with ultraviolet detection. The synthesized MIPs were characterized by several techniques such as Fourier-transform infrared spectroscopy, field emission scanning electron microscopy, and thermal gravimetric analysis. The effects of various influencing factors on the extraction yield of phenobarbital were considered and optimized. The conditions that yielded the maximum extraction efficiency were as follows: pH of 5, 25 min extraction time, 500 rpm stirring rate, 15 min desorption time and using methanol as elution solvent. Within the range of concentrations of 0.02 to 100 μg mL-1, the method had linear characteristics, with a suitable coefficient of determination (0.9983). We determined limits of detection and limits of quantification to be 9.88 and 32.9 ng mL-1, respectively. The repeatability and reproducibility of the prepared fibers were 4.6 and 6.5%, respectively.

Influence of Synthesis Parameters and Polymerization Methods on the Selective and Adsorptive Performance of Bio-Inspired Ion Imprinted Polymers

Ion-imprinted polymers (IIPs) have been widely used in different fields of Analytical Sciences due to their intrinsic selective properties. However, the success of chemical imprinting in terms of selectivity, as well as the stability, specific surface area, and absence of swelling effect depends on fully understanding the preparation process. Therefore, the proposal of this review is to describe the influence of relevant parameters on the production processes of ion-imprinted polymers, including the nature (organic, inorganic, or hybrid materials), structure, properties of the salt (source of the metal ion), ligand, crosslinking agent, porogenic solvent, and initiator. Additionally, different polymerization methods are discussed, the classification of IIPs as well as the applications of these adsorbent materials in the last years (2017–2022).

Preparation of Molecular Imprinted Polymer Based on Chitosan as the Selective Sorbent for Solid-Phase Microextraction of Phenobarbital

This study reports the construction of a novel SPME fiber based on chitosan and glutaraldehyde as coating material composites combined with high-performance liquid chromatography with an ultraviolet detector (HPLC-UV) for extraction and detection of phenobarbital. In this technique, the chitosan biopolymer, as a new coating of SPME fiber, was produced on the stainless-steel wire, using glutaraldehyde and phenobarbital as cross-linker and template, respectively. For comparison, a nonimprinted polymer was created using the same procedure to evaluate fiber selectivity (but without the addition of phenobarbital). The SPME-MIP fiber coating was characterized by field emission scanning electron microscopy, Fourier-transform infrared spectroscopy, and thermal gravimetric analysis. The efficiency of fiber was then improved by adjusting the impact of numerous factors such as pH, extraction time, desorption time, desorption solvent, and stirring rate. The results showed that the proposed fiber has a linear range of 0.01-4 μg·mL^-1, and detection limit of 7.5 ng·mL^-1. The average recoveries in the four concentration levels for the spiked river and well water samples were 95.7 and 95.3%, with relative standard deviations of 3.8 and 5.9% for single fiber and between fibers, respectively.

A Novel Electrochemical Sensor Based on Electropolymerized Ion Imprinted PoPD/ERGO Composite for Trace Cd(II) Determination in Water

A novel electrochemical sensor based on electropolymerized ion imprinted poly (o-phenylenediamine) PoPD/electrochemical reduced graphene (ERGO) composite on glass carbon electrode (GCE) was fabricated for selective and sensitive determination of trace Cd(II) in water. ERGO was first deposited on the surface of GCE by electrochemical cyclic voltammetry (CV) scanning to enhance the electron transport activity at electrode surface. The ion imprinted polymer (IIP) of imprinted PoPD was then in situ electropolymerized on ERGO via CV scanning with oPD as functional monomer and Cd(II) ions as template, following removal of the template using electrochemical peroxidation method. The obtained imprinted PoPD/RERGO composites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray energy spectroscopy (EDS) for the observation of their morphologies and components. The electrochemical behavior of the imprinted PoPD/ERGO/GCE was performed by CV and SWASV. The fabricated sensor of the imprinted PoPD/ERGO/GCE showed a good selectivity toward target Cd(II) ions in the presence of other heavy metal ions. Under the optimized experimental conditions, the sensor exhibited a good linear relationship between SWASV stripping peak values and Cd(II) concentration in the range of 1 to 50 ng/mL, with the limit of detection as 0.13 ng/mL (S/N = 3). The proposed electrochemical sensor of imprinted PoPD/ERGO/GCE was successfully applied for trace Cd(II) determination in real water samples.

Fabrication of chromium-imprinted polymer: a real magneto-selective sorbent for the removal of Cr(vi) ions in real water samples

Graphical representation (a and b) show the procedure for the synthesis of Cr(vi) ion-imprinted magnetic polymer.

High-performance polyimides based on pyridine and xanthene pendant groups; synthesis, characterization, photoactivity, thermal, antibacterial, and Cr(VI) ion adsorption properties

A group of new polyimides (PIs) containing xanthene bulky groups and heterocyclic pyridine ring were synthesized by polycondensation reaction by using new symmetric and asymmetric diamines with available dianhydrides. The prepared diamines and PIs were characterized by Fourier transform infrared, elemental analysis, and proton nuclear magnetic resonance spectroscopy and carbon nuclear magnetic resonance spectroscopy. The PIs have desirable solubility in common aprotic solvents like dimethyl sulfoxide, N-methyl-2-pyrrolidone, dimethylacetamide, and pyridine as a less polar solvent. The PIs with inherent viscosities in the range of 0.51–0.72 dL/g were amorphous in nature, showed glass transition temperatures ( Tgs) of about 270–300°C, and 10% weight loss at temperatures 384–443°C. They showed fluorescence emission (quantum yield 7–12%) due to the presence of xanthene and pyridine groups in their structure. The prepared PIs showed tensile strength of 81–91 MPa with elongation at break of 19–23%. The antibacterial properties of the PIs against Gram negative and Gram positive bacteria and funguses were investigated. Also, a membrane of PI prepared by electrospinning method was used for the removal of different concentrations of Cr(VI) from aqueous solutions.