Molecularly imprinted polymers based on methacrylic acid and ethyleneglycol dimethacrylate for l-lysine recognition

Sensitive Coatings Based on Molecular-Imprinted Polymers for Triazine Pesticides' Detection

Triazine pesticide (atrazine and its derivatives) detection sensors have been developed to thoroughly check for the presence of these chemicals and ultimately prevent their exposure to humans. Sensitive coatings were designed by utilizing molecular imprinting technology, which aims to create artificial receptors for the detection of chlorotriazine pesticides with gravimetric transducers. Initially, imprinted polymers were developed, using acrylate and methacrylate monomers containing hydrophilic and hydrophobic side chains, specifically for atrazine, which shares a basic heterocyclic triazine structure with its structural analogs. By adjusting the ratio of the acid to the cross-linker and introducing acrylate ester as a copolymer, optimal non-covalent interactions were achieved with the hydrophobic core of triazine molecules and their amino groups. A maximum sensor response of 546 Hz (frequency shift/layer height equal to 87.36) was observed for a sensitive coating composed of 46% methacrylic acid and 54% ethylene glycol dimethacrylate, with a demonstrated layer height of 250 nm (6.25 kHz). The molecularly imprinted copolymer demonstrated fully reversible sensor responses, not only for atrazine but also for its metabolites, like des-ethyl atrazine, and structural analogs, such as propazine and terbuthylazine. The efficiency of modified molecularly imprinted polymers for targeted analytes was tested by combining them with a universally applicable quartz crystal microbalance transducer. The stable selectivity pattern of the developed sensor provides an excellent basis for a pattern recognition procedure.

Fabrication of a Lactate-Specific Molecularly Imprinted Polymer toward Disease Detection

The development of sensitive and selective robust sensor materials for targeted biomarker detection aims to contribute to self-health monitoring and management. Molecularly imprinted polymeric (MIP) materials can perform as biomimetic recognition elements via tailored routes of synthesis for specific target analyte extraction and/or detection. In this work, a sensitive- and selective-lactate MIP has been developed utilizing methacrylic acid and ethylene glycol dimethacrylate as the functional monomer and cross-linker, respectively. The sensitivity of the as-synthesized imprinted species was evaluated by determining the target analyte retention, imprinting factor, and selectivity adsorption of up to 63.5%, 6.86, and 0.82, respectively. MIP selectivity elucidated the imprinting mechanism between the functional monomers and target analyte lactate, further experimentally evidenced by using structurally competitive analytes malic acid and sodium 2-hydroxybutyrate, where retentions of 22.6 and 25.2%, respectively, were observed. Understanding the specific intermolecular mechanisms of both the template analyte and structural interferents with the MIP enables experimentalists to make informed decisions regarding monomer-target and porogen selections and possible sites of interaction for improved molecular imprinting. This imprinting system highlights the potential to be further developed into artificial receptor sensor materials for the detection of disease.

The Effect of the Synthesis Method on Physicochemical Properties of Selective Granular Polymer Sorbents

Investigation of the effect of the polymer synthesis method on physicochemical properties of sorbents is one of the topical problems in the chemistry of macromolecular compounds that has high scientific and practical interest. Determination of the optimal synthesis method will make it possible to create sorbents with physicochemical properties that led to the realization of effective sorption. In this work, we investigated the effect of synthesis methods (Pickering emulsion polymerization and precipitation polymerization in solution) of granular polymers based on 2-hydroxyethyl methacrylate and ethylene glycol dimethacrylate on physicochemical and sorption properties. The synthesis by Pickering emulsion polymerization led to improvement of the n-propyl alcohol diffusion into the polymer network and to the formation of more homogeneous and structurally stable polymer networks. Creating selective polymer networks by Pickering emulsion polymerization compared to precipitation polymerization in solution led to an increase in porosity, creation of more segregated surface of granules, improvement of binding sites availability at the temperature of 37 °C, and formation of the homogeneous sorption surface with high affinity to target molecules at 25 °C and 37 °C. Selective polymers synthesized by both polymerization methods had the largest values of available sorption surfaces areas for target molecules at 37 °C.

Colorimetric Sensing of Amoxicillin Facilitated by Molecularly Imprinted Polymers

The scope of the presented research orientates itself towards the development of a Molecularly Imprinted Polymer (MIP)-based dye displacement assay for the colorimetric detection of the antibiotic amoxicillin in aqueous medium. With this in mind, the initial development of an MIP capable of such a task sets focus on monolithic bulk polymerization to assess monomer/crosslinker combinations that have potential towards the binding of amoxicillin. The best performing composition (based on specificity and binding capacity) is utilized in the synthesis of MIP particles by emulsion polymerization, yielding particles that prove to be more homogenous in size and morphology compared to that of the crushed monolithic MIP, which is an essential trait when it comes to the accuracy of the resulting assay. The specificity and selectivity of the emulsion MIP proceeds to be highlighted, demonstrating a higher affinity towards amoxicillin compared to other compounds of the aminopenicillin class (ampicillin and cloxacillin). Conversion of the polymeric receptor is then undertaken, identifying a suitable dye for the displacement assay by means of binding experiments with malachite green, crystal violet, and mordant orange. Once identified, the optimal dye is then loaded onto the synthetic receptor, and the displaceability of the dye deduced by means of a dose response experiment. Alongside the sensitivity, the selectivity of the assay is scrutinized against cloxacillin and ampicillin. Yielding a dye displacement assay that can be used (semi-)quantitatively in a rapid manner.

A Molecularly Imprinted Polymer-based Dye Displacement Assay for the Rapid Visual Detection of Amphetamine in Urine

The rapid sensing of drug compounds has traditionally relied on antibodies, enzymes and electrochemical reactions. These technologies can frequently produce false positives/negatives and require specific conditions to operate. Akin to antibodies, molecularly imprinted polymers (MIPs) are a more robust synthetic alternative with the ability to bind a target molecule with an affinity comparable to that of its natural counterparts. With this in mind, the research presented in this article introduces a facile MIP-based dye displacement assay for the detection of (±) amphetamine in urine. The selective nature of MIPs coupled with a displaceable dye enables the resulting low-cost assay to rapidly produce a clear visual confirmation of a target's presence, offering huge commercial potential. The following manuscript characterizes the proposed assay, drawing attention to various facets of the sensor design and optimization. To this end, synthesis of a MIP tailored towards amphetamine is described, scrutinizing the composition and selectivity (ibuprofen, naproxen, 2-methoxphenidine, quetiapine) of the reported synthetic receptor. Dye selection for the development of the displacement assay follows, proceeded by optimization of the displacement process by investigating the time taken and the amount of MIP powder required for optimum displacement. An optimized dose-response curve is then presented, introducing (±) amphetamine hydrochloride (0.01-1 mg mL^-1) to the engineered sensor and determining the limit of detection (LoD). The research culminates in the assay being used for the analysis of spiked urine samples (amphetamine, ibuprofen, naproxen, 2-methoxphenidine, quetiapine, bupropion, pheniramine, bromopheniramine) and evaluating its potential as a low-cost, rapid and selective method of analysis.

Upcycling of groundwater treatment sludge to magnetic Fe/Mn-bearing nanorod for chromate adsorption from wastewater treatment

Groundwater treatment sludge is a Fe/Mn-bearing waste that is mass produced in groundwater treatment plant. In this study, sludge was converted to a magnetic adsorbent (MA) by adding ascorbate. The sludge was weakly magnetised in the amorphous form with Fe and Mn contents of 28.8% and 8.1%, respectively. After hydrothermal treatment, Fe/Mn oxides in the sludge was recrystallised to siderite and rhodochrosite, with jacobsite as the intermediate in the presence of ascorbate. With an increment in ascorbate dosage, the obtained magnetic adsorbent had a significant increase in chromate adsorption but a decrease in magnetisation. When the M_ascorbate/M_Fe molar ratio was 10, the produced MA-10 was a dumbbell-shaped nanorod with a length of 2–5 μm and a diameter of 0.5–1 μm. This MA-10 showed 183.2 mg/g of chromate adsorption capacity and 2.81 emu/g of magnetisation. The mechanism of chromate adsorption was surface coprecipitation of the generated Cr³⁺ and Fe³⁺/Mn⁴⁺ from redox reaction between chromate and siderite/rhodochrosite on MA-10, separately. This study demonstrated an efficient recycling route of waste sludge from groundwater treatment to produce MA for treating chromate-bearing wastewater.

Theoretical research of molecular imprinted polymers formed from formaldehyde and methacrylic acid

In recent years, with the development of molecular imprinting technology, the imprinting sites, nature of imprinting, selection of functional monomers, cross-linking agents, solvents, and the optimization of the imprinting ratio are all the hot spots of researchers. In this work, the theoretical prediction of the self-assembly system of formaldehyde (HCHO) molecularly imprinted polymer was carried out by the B3LYP/6-31 G(d,p) method. The geometric configuration and active sites of the stable complex of HCHO and methacrylic acid (MAA) were analyzed. The selection of the imprinting ratios, cross-linking agents, and solvents was discussed. The topological properties of electron density of HCHO-MAA complex were considered by using the topological analysis method of chemical bond electron density based on valence bond theory. This study cannot only reveal the relationship between the imprinting mechanism of molecularly imprinted polymers and the molecular structure and properties of molecularly imprinted polymers but also provide valuable reference for the design and preparation of molecularly imprinted polymers.

A review of cryogels synthesis, characterization and applications on the removal of heavy metals from aqueous solutions

The physical and chemical attributes of cryogels, such as the macroporosity, elasticity, water permeability and ease of chemical modification have attracted strong research interest in a variety of areas, such as water purification, catalysis, regenerative medicine, biotechnology, bioremediation and biosensors. Cryogels have shown high removal efficiency and selectivity for heavy metals, nutrients, and toxic dyes from aqueous solutions but there are challenges when scaling up from lab to commercial scale applications. This paper represents an overview of the most recent advances in the use of cryogels for the removal of heavy metals from water and attempts to fill the gap in the literature by deepening the understanding on the mechanisms involved, which strongly depend on the initial monomer composition and post-modification agent precursors used in synthesis. The review also describes the advantages of cryogels over other adsorbents and covers synthesis and characterization methods such as SEM/EDS, TEM, FTIR, zeta potential measurements, porosimetry, swelling and mechanical properties.

Chiral Stationary Phases for Liquid Chromatography: Recent Developments

The planning and development of new chiral stationary phases (CSPs) for liquid chromatography (LC) are considered as continuous and evolutionary issues since the introduction of the first CSP in 1938. The main objectives of the development strategies were to attempt the improvement of the chromatographic enantioresolution performance of the CSPs as well as enlarge their versatility and range of applications. Additionally, the transition to ultra-high-performance LC were underscored. The most recent strategies have comprised the introduction of new chiral selectors, the use of new materials as chromatographic supports or the reduction of its particle size, and the application of different synthetic approaches for preparation of CSPs. This review gathered the most recent developments associated to the different types of CSPs providing an overview of the relevant advances that are arising on LC.