A novel morphological ion imprinted polymers for selective solid phase extraction of Cd(II): Preparation, adsorption properties and binding mechanism to Cd(II)

The Multi-Challenges of the Multi-Ion-Imprinted Polymer Synthesis

Multi-ion-imprinted polymers (MIIPs) are materials with a wide range of applications mainly focused on environmental recovery, mining, technology, sensors, etc. MIIPs can incorporate ions such as heavy metals, transition metals, rare earth elements, radionuclides, and other types of ions. The chemical structures of MIIPs can be designed for different purposes and with certain morphologies, such as gels, crystals, or powders, and the surface area and porosity are also considered. All these properties provide the material with several desirable characteristics, like high selectivity, high specificity, adequate efficiency, good stability, the possibility of reusability, and strategy technology adaptation. In this review, we show the multitude of challenges of multi-ion imprinted polymer chemical synthesis based on the different and interesting methods reported previously.

A facile approach for grafting ion imprinted polymer onto magnetic multi-walled carbon nanotubes for selective removal and preconcentration of cadmium in food and wastewater samples prior to atomic spectrometric determination

A 3D Fe₃O₄@MWCNT-CdIIP was synthesized by the oxidizing surface of multi-walled carbon nanotubes with carboxylic acid end groups and its subsequent termination with an ion imprinted polymer. An artificial neural network manifests better predictability than the central composite design methodology for optimising the adsorption procedure. The adsorption capacity was 109 mg g^-1 (2.5 times more than non-imprinted polymer) under optimized conditions (pH; 5.6, time; 15 min, concentration; 800 μg mL^-1 temperature; 25 °C), which was in accord with Toth isotherm. Fractal-like pseudo-second-order kinetics was found reasonably fast, with 66 % adsorption in 5 min. Solid phase extraction coupled Flame atomic absorption spectrometry method provides selective recognition towards Cd(II), with limit of detection; 1.13 µg/L, limit of quantification; 3.21 µg/L after preconcentration (preconcentration factor; 50) and good robustness. The developed method was applied for Cd(II) determination in food (tea, coffee, bread, tobacco, radish, spinach), water and wastewater (>99 % removal as well). Cd(II) loaded IIP was further utilized to remove anionic dyes with >95 % removal.

Selective removal and recovery of Ni(ii) using a sulfonic acid-based magnetic rattle-type ion-imprinted polymer: adsorption performance and mechanisms

It is significant to selectively remove Ni(ii) ions from wastewater. A novel sulfonic acid-based magnetic rattle-type ion-imprinted polymer (Fe₃O₄@void@IIP-Ni(ii)) was designed by taking advantage of the strong interaction between Ni(ii) and sulfonic acid groups. Green polymerization was used to synthesize Fe₃O₄@void@IIP-Ni(ii), which was then investigated using SEM, TEM, FT-IR, VSM, TGA, EDS, and XPS. The adsorption results indicated that the prepared imprinted material had a short adsorption equilibrium time (10 min), good magnetic responsiveness (about 5 seconds) and high adsorption capacity (44.64 mg g^-1) for Ni(ii) at the optimal pH of 6.0. The removal rate of Ni(ii) was up to 99.97%, and the adsorption process was spontaneous and endothermic, following the pseudo-secondary kinetic model and Langmuir model. The selectivity coefficients of the imprinted material were 4.67, 4.62, 8.94 and 9.69 for Ni(ii)/Co(ii), Ni(ii)/Cu(ii), Ni(ii)/Pb(ii) and Ni(ii)/Zn(ii), respectively. The regeneration and application of the imprinted material in actual water samples have been verified. Moreover, the mechanism of selective adsorption for Ni(ii) was investigated by FTIR, XPS and density functional theory (DFT) calculation. The results showed that the imprinted sorbent has a strong binding ability with Ni(ii), and the adsorption of Ni(ii) on Fe₃O₄@void@IIP-Ni(ii) was the result of the co-coordination of O atoms of the sulfonic acid groups and N atoms of -N-C[double bond, length as m-dash]O groups in AMPS with Ni(ii).

Tailored-designed material for the preconcentration of Cd(II) on glycidyl methacrylate-based ion-imprinted polymer for flame atomic absorption for trace determination in real samples: multivariate optimization

A new Cd(II)-imprinting polymer was synthesised based on glycidyl methacrylate (Fe₃O₄@GMA@IIP) and employed to develop a dispersive magnetic solid-phase extraction method for the preconcentration prior to the determination of Cd(II) from the environmental samples. A central composite design (CCD) based on response surface methodology was used for optimization of the process variables and the material shows the promising saturation adsorption capacity of 28.21 mg g^-1 under the optimum pH of 4.9 within 15.2 min at saturation concentration 914 μg mL^-1. The experimental data were well described by Sips isotherm model and Brouers-Sotolongo fractal kinetic model that indicated the surface heterogeneity and involvement of both chemisorption and physisorption process. Thermodynamic results documented the endothermic and spontaneous nature of adsorption. The sorbent manifest the economic feasibility maintaining its sorption efficiency after the regeneration by 1 M HNO₃ and reusability up to 6 adsorption/desorption cycles. The developed method exhibited the preconcentration factor of 30 and a high degree of tolerance for matrix ions. Limit of detection (LOD) and quantification (LOQ) were calculated as 3.054 and 10.182 μg L^-1 respectively. The developed method was validated by the standard reference material and spiking addition method in real samples, and obtained results showed good agreement in accordance with spiking values. The ease of magnetic separation, high selectivity, good adsorption capacity and faster kinetics made this material a promising candidate for Cd(II) determination in various food and aqueous samples.

Genetically modified metallothionein/cellulose composite material as an efficient and environmentally friendly biosorbent for Cd2+ removal

Metallothioneins (MTs) are a class of cysteine-rich metal-binding proteins. Cadmium (Cd) is one of the toxic heavy metal pollutants. In our previous research, the full-length cDNA of MT (Cd specificity) from freshwater crab (Sinopotamon henanense) (ShMT) was cloned and genetically modified to ShMT3 by site-directed mutagenesis to enhance the tolerance for Cd²⁺, however, it was limited in actual Cd²⁺ adsorption due to instability. Here, ShMT3-CBM, a novel recombinant fusion protein, was prepared. CBM is a carbohydrate binding module that can specifically bind cellulose while ShMT3 can effectively chelate Cd²⁺. The biosorbent Cellulose1-ShMT3-CBM was obtained by screening suitable cellulose materials. The selective adsorption experiments showed that Cellulose1-ShMT3-CBM had a preference for Cd²⁺. In low-concentration Cd²⁺ solutions, the removal efficiency was >99 %, and the adsorption equilibrium was reached within 15 min. The saturated adsorption capacity of Cellulose1-ShMT3-CBM for Cd²⁺ is 180.35 ± 4.67 mg/g (Dry Weight). Regeneration experiments showed that adsorption efficiency was maintained after six cycles. The MTT experiment showed that Cellulose1-ShMT3-CBM had low cytotoxicity. Meanwhile, Cellulose1-ShMT3-CBM can preferentially remove Cd²⁺ in actual water samples and boiler sewage. In this study, an environmentally friendly biosorbent which can adsorb Cd²⁺ efficiently and quickly was prepared for actual water treatment.

Direct Synthesis of Sulfur-Decorating PAMAM Dendrimer/Mesoporous Silica for Enhanced Hg(II) and Cd(II) Adsorption

Water security caused by heavy metals poses a deleterious hazard to public health and the ecological system. The construction of adsorbents by polyamidoamine (PAMAM) dendrimers for efficient removal of metal ions has attracted considerable interest. However, the general method for the fabrication of these adsorbents was achieved by the surface chemical modification of the substrates with PAMAM dendrimer, which usually causes the defects of low density and uneven distribution of the dendrimer, the blocking of pores, and reducing the adsorption performance. Hence, the development of a new method for preparation of PAMAM dendrimer-based adsorbent to realize the efficient and enhanced adsorption of metal ions is still a challenge. Herein, methylisothiocyanate decorated PAMAM dendrimer/mesoporous silica composites (G0-S-1/x, G1.0-S-1/x, G2.0-S-1/x, x = 2, 4, 6, 8, 10) were synthesized by the direct sol-gel reaction of alkoxysilyl-containing functional PAMAM dendrimer. The adsorbents display enhanced adsorption property for Hg(II) and Cd(II) as compared with the same adsorbents which were prepared by traditional chemical modification method. Take G2.0-S-1/2 as an example, the maximum adsorption capacities are 2.41 and 0.87 mmol·g^-1 for Hg(II) and Cd(II), respectively . Moreover, the adsorbents show excellent selective adsorption and regeneration property. G2.0-S-1/2 displays distinct selectivity for Hg(II) with the presence of Co(II), Pb(II), Cd(II), and Cu(II). The regeneration percentage still maintains 95.2% after five adsorption-desorption cycles. The adsorption mechanism is also certified by the experimental method and theoretical calculation.

The selective recognition mechanism of a novel highly hydrophobic ion-imprinted polymer towards Cd(ii) and its application in edible vegetable oil

Edible vegetable oils are easily contaminated by heavy metals, resulting in the oxidative degradation of oils and various health effects on humans. Therefore, it is very important to develop a rapid and efficient method to extract trace heavy metals from vegetable oils. In this work, a highly hydrophobic ion-imprinted polymer (IIP) was synthesized on a novel raspberry (RS)-like particle surface. The synthesized IIP@RS was characterized and used in solid-phase extraction (SPE) for the selective and fast adsorption of Cd(ii) from vegetable oils. The results showed that IIP was successfully coated onto RS particles with a high specific surface area (458.7 m² g⁻¹) and uniform porous structure. The contact angle (θ) value (141.8°) of IIP@RS was close to the critical value of super-hydrophobic materials, which is beneficial to their adsorption in hydrophobic vegetable oils. The IIP@RS also exhibited excellent adsorption ability and selectivity to Cd(ii) with a maximum adsorption capacity of 36.62 mg g⁻¹, imprinting factor of 4.31 and equilibrium adsorption rate of 30 min. According to isothermal titration calorimetry results, the recognition behavior of IIP@RS for Cd(ii) was mainly contributed by Cd(ii)-induced cavities during gel formation and coordination between Cd(ii) and –SH groups in imprinted cavities. Furthermore, the adsorption process driven by entropy and enthalpy was spontaneous at all temperatures. In real vegetable oil samples, IIP@RS-SPE adsorbed approximately 96.5–115.8% of Cd(ii) with a detection limit of 0.62 μg L⁻¹. Therefore, IIP@RS has wide application prospects in enriching and detecting Cd(ii) from vegetable oil.

Edible vegetable oils are easily contaminated by heavy metals, resulting in the oxidative degradation of oils and various health effects on humans.

Preparation and adsorption properties of Ni(ii) ion-imprinted polymers based on synthesized novel functional monomer

In this study, a novel functional monomer N-(1-(2,4-difluorophenyl)-2-(1H-1,2,4-triazol-1-yl)ethyl)acrylamide (NDTEA) was designed and synthesized, and was used to prepare Ni(ii) ion-imprinted polymers (Ni(ii)-IIPs). Sixteen kinds of Ni(ii)-IIP (Ni(ii)-IIP1–16) and corresponding non-imprinted polymers (NIP1–16) were prepared by precipitation polymerization method. After optimized condition experiment, Ni(ii)-IIP5 possessed maximum adsorption capacity and better imprinting factor under optimal experimental conditions which indicated by equilibrium adsorption experiments. The morphology and structural characteristics of Ni(ii)-IIP5 were characterized by scanning electron microscopy (SEM) and Brunauer–Emmett–Teller (BET). The adsorption selectivity of Ni(ii)-IIP5 was analyzed by ICP-OES, and the results showed that Ni(ii)-IIP5 had favorable selectivity recognition ability for Ni(ii) when Cu(ii), Co(ii), and Cd(ii) are used as competitive ions. The kinetic experiment indicated that the performance of Ni(ii) adsorption on the surface of Ni(ii)-IIP5 obeyed the pseudo-first-order model, and adsorption equilibrium was attained after 15 min. Isothermal adsorption process fitted to Langmuir and Freundlich isothermal adsorption models, simultaneously. The results showed that Ni(ii)-IIP5 prepared by using a new functional monomer had better permeation selectivity and higher affinity for Ni(ii), which also verified the rationality of the functional monomer design. At the same time, it also provided a broad application prospect for removal of Ni(ii) in complex samples.