Preparation of gold nanoparticles-agarose gel composite and its application in SERS detection

Ag Nanoparticles@Agar Gel as a 3D Flexible and Stable SERS Substrate with Ultrahigh Sensitivity

Flexible surface-enhanced Raman scattering (SERS) substrates have become one of the research hot spots due to the facile sampling by swabbing or wrapping on rough surfaces and the sensitive and nondestructive detection of contaminants. In this work, we proposed a simple and fast in situ reduction method to prepare Ag nanoparticles (Ag NPs) composited agar hydrogel (Ag NPs@Agar) flexible SERS substrate. Owing to the three-dimensional (3D) structure, good hydrophilicity and adsorption of the agar hydrogel, Ag NPs were grown uniformly in the 3D cross-linked structure. The distribution density of Ag NPs was further increased by the volume shrinkage when the hydrogel was dried in air. This high density and uniformly distribution of Ag NPs produced a large number of highly active SERS regions. In addition, the sensitivity of Ag NPs@Agar was further improved with the assistance of hydrophilic agar gel, which can trap the probe molecules into highly active SERS areas. The SERS results showed that the substrate can be used to detect dye molecules (rhodamine 6G), the minimum detectable concentration was 10^-15 M, the relative standard deviation tested at 18 different positions was only 7.58%, and the intensity of the characteristic peak at 611 cm^-1 decreased only about 10% after 49 days of storage, demonstrating the superior stability. Moreover, the Ag NPs@Agar substrate also could successfully achieve the micro-trace detection of melamine and sodium penicillin G in Xinjiang specialty camel milk powder. The above available results show that the prepared flexible Ag NPs@Agar SERS substrates possess potentials for the illegal additives and antibiotics in food safety analysis.

Fabrication and Comparative Quantitative Analysis of Plasmonic-Polymer Nanocomposites as Optical Platforms

Plasmonic-polymer nanocomposites can serve as a multifunctional platform for a wide range of applications such as biochemical sensing and photothermal treatments, where they synergistically benefit from the extraordinary optical properties of plasmonic nanoparticles (NPs) and biocompatible characteristics of biopolymers. The field translation of plasmonic-polymer nanocomposites requires design rules for scalable and reproducible fabrication with tunable and predictable optical properties and achieving the best performance. The optical properties of NPs and the optimal analytical performance of nanocomposites could be affected by many fabrication parameters, but a fundamental understanding of such parameters is still minimal. Herein, we systematically investigated the NP distribution and their optical properties in gold nanostar (GNS)-polymer nanocomposites as a function of GNS concentration, polymer identity, and the method of GNS incorporation into a polymer matrix. We performed a comprehensive analysis of the single-particle scattering spectra of GNS incorporated into agarose gel and chitosan hydrogels via embedding and surface deposition, using dark-field spectroscopy. While relative GNS concentration affects the GNS scattering property distribution in both polymer matrices, chemical interactions between a polymer matrix and GNS is the key determinant of the GNS stability and homogenous distribution in nanocomposites. When GNS are embedded in a polymer matrix and there are stronger chemical interactions between GNS and a polymer, significantly less aggregation and a more homogenous distribution of GNS, which leads to a larger percentage of GNS optical property preservation, were observed at all the concentrations. In a proof-of-concept surface-enhanced Raman spectroscopy (SERS) study, we observed that the SERS detection efficiency is dictated by the analyte accessibility of GNS, which is governed by the polymer matrix porosity, polymer-GNS interactions, and other polymer physical characteristics. This work presents the interplay between key fabrication parameters and foundational design parameters for more predictable and reliable fabrication of plasmonic-polymer nanocomposites as an optical platform.

Coupling plasmonic catalysis and nanocrystal growth through cyclic regeneration of NADH

In a typical colloidal synthesis, the molecules of the reducing agent are irreversibly oxidized during nanocrystal growth. Such a scenario is of questionable sustainability when confronted with naturally occurring processes in which reducing agent molecules are cyclically regenerated. Here we show that cofactor molecules once consumed in the nucleation and growth of metallic nanocrystals can be photoregenerated using metallic nanocrystals as photocatalysts and reused in the subsequent nucleation process. Cyclic regeneration of cofactor molecules opens up the possibilities for the sustainable synthesis of inorganic nanoparticles.

Determination of NADH by Surface Enhanced Raman Scattering Using Au@MB@Ag NPs

Nicotinamide adenine dinucleotide (NADH) is an important coenzyme involved in various metabolic processes of living cells. As an important biomarker, NADH is associated with breast cancer and Alzheimer’s disease. In this paper, silver plated gold core–shell nanoparticles containing Raman signal molecules were synthesised on the basis of bare gold. Using the Raman peak corresponding to the 4-mercaptobenzonitrile (MB) silent region C≡N vibration for quantification, while avoiding competition with the precious metal surface binding site to be measured, it can also be free from the interference of endogenous biomolecules. On the one hand, it can correct the working curve, on the other hand, it can avoid competing with the binding site. Compared with the core–shell structure prepared here, the limit of detection (LOD) for NADH was only 10−5 M for bare gold and the LOD for the core–shell structure prepared on the basis of bare gold was 3.3 × 10−7 M. In terms of correction, with Rhodamine 6G (R6G) as a Raman signalling molecule, the R2 value before SERS detection and correction is only 0.9405, and the R2 value after correction increases to 0.9853. The unique fingerprint peak of SERS was used to realise the quantitative detection of NADH, which realizes the detection of NADH in complex biological samples of serum and provides the possibility for expanding the early diagnosis of breast cancer.

Green synthesis and in situ immobilization of gold nanoparticles and their application for the reduction of p-nitrophenol in continuous-flow mode

A green and facile method has been developed for the preparation of in situ immobilized gold nanoparticles (AuNPs) using agarose as a reducing and stabilizing agent. The size of the synthesized AuNPs ranges between 10 and 100 nm, and their average size can be controlled by the concentrations of the agarose and gold salt. The agarose matrix as a mild and green reaction medium can provide a good dispersion environment for forming AuNPs, and the hydrogel can be well homogenized with polyacrylic macroporous microbeads as well, which can adsorb and stabilize the particles leading to the simultaneous synthesis and immobilization of AuNPs avoiding harmful inorganic compounds or organic solvents. The supported gold nanocatalyst was successfully applied as a catalyst in packed bed reactors for efficient NaBH₄-mediated reduction of p-nitrophenol in continuous-flow mode.

Gold nanoparticles synthesized using agarose and supported in macroporous polymer beads were used in continuous-flow mode in reduction of p-nitrophenol by sodium borohydride.

Supramolecular Low-Molecular-Weight Hydrogelator Stabilization of SERS-Active Aggregated Nanoparticles for Solution and Gas Sensing

The potential of surface-enhanced Raman scattering (SERS) spectroscopy in both laboratory and field analyses depends on the reliable formation of so-called SERS hot spots, such as those formed during gold or silver nanoparticle aggregation. Unfortunately such aggregates are not stable in solution because they typically grow until they precipitate. Here we describe the use of low-molecular-weight hydrogels formed through pH-triggered self-assembly that occurs at a rate that well matches the rates of aggregation of Au or Ag colloids, allowing them to be trapped at the SERS-active point in the aggregation process. We show that the colloid-containing gels give SERS signals similar to the parent colloid but are stable over several months. Moreover, lyophilized gels can be stored as dry powders for subsequent use in the analyses of gases and dissolved analytes by contact with either solutions or vapors. The present system shows how the combination of pH-switchable low-molecular-weight gelators and pH-induced colloid aggregation can be combined to make a highly stable, low-cost SERS platform for the detection of volatile organic compounds and the microvolume analysis of solutions.