Measurement of OH radicals distribution in a microwave plasma sheet using LIF method

Atmospheric air plasma sustainment by semiconductor microwave for hydroxyl radical production and powder metal element analysis

A semiconductor microwave device that generates a series of burst microwaves at a sub-microsecond duration has been successfully used in a breakdown plasma spectrometer in atmospheric conditions. Microwave delivery has been changed to couple the microwave with laser sparks and electric sparks which are typical plasma ignition sources in laser-induced breakdown spectroscopy (LIBS) and spark-induced breakdown spectroscopy (SIBS). A helical antenna was used for the laser spark, while a coaxial antenna was considered more appropriate for the electric spark. The weak and transient sparks in LIBS and SIBS are enlarged by the microwaves which are stably sustained in the air. The microwave's output power and pulse duration are easily controllable, resulting in tunable plasma intensity and sustained production of hydroxyl radicals (OH radicals). Even in continuous-wave operation by microwave, the low-energy system prevented the formation of high-temperature thermal plasma (>10,000 K) without any mechanical cooling system. The microwave-enhanced LIBS (MW-LIBS) and microwave-enhanced SIBS (MW-SIBS) could be applied to optical emission spectroscopy analyses. In analytical applications, MW-SIBS produces no shockwave in contrast with MW-LIBS which is a great advantage in powdered samples. The MW-SIBS successfully analyzed the direct introduction of copper metal powders.

Surface modification of PMMA polymer and its composites with PC61BM fullerene derivative using an atmospheric pressure microwave argon plasma sheet

This paper presents the results of experimental investigations of the plasma surface modification of a poly(methyl methacrylate) (PMMA) polymer and PMMA composites with a [6,6]-phenyl-C61-butyric acid methyl ester fullerene derivative (PC₆₁BM). An atmospheric pressure microwave (2.45 GHz) argon plasma sheet was used. The experimental parameters were: an argon (Ar) flow rate (up to 20 NL/min), microwave power (up to 530 W), number of plasma scans (up to 3) and, the kind of treated material. In order to assess the plasma effect, the possible changes in the wettability, roughness, chemical composition, and mechanical properties of the plasma-treated samples’ surfaces were evaluated by water contact angle goniometry (WCA), atomic force microscopy (AFM), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS). The best result concerning the water contact angle reduction was from 83° to 29.7° for the PMMA material. The ageing studies of the PMMA plasma-modified surface showed long term (100 h) improved wettability. As a result of plasma treating, changes in the samples surface roughness parameters were observed, however their dependence on the number of plasma scans is irregular. The ATR-FTIR spectra of the PMMA plasma-treated surfaces showed only slight changes in comparison with the spectra of an untreated sample. The more significant differences were demonstrated by XPS measurements indicating the surface chemical composition changes after plasma treatment and revealing the oxygen to carbon ratio increase from 0.1 to 0.4.