A novel fluorescent chemosensor based on coumarin and quinolinyl-benzothiazole for sequential recognition of Cu2+ and PPi and its applicability in live cell imaging

Construction of Chitosan-Modified Naphthalimide Fluorescence Probe for Selective Detection of Cu2

A chitosan-based Cu2+ fluorescent probe was designed and synthesized independently using the C-2-amino group of chitosan with 1, 8-naphthalimide derivatives. A series of experiments were conducted to characterize the optical properties of the grafted probe. The fluorescence quenching effect was investigated based on the interactions between the probe and common metals. It was found that the proposed probe displayed selective interaction with Cu2+ over other metal ions and anions, reaching equilibrium within 5 min.

Dual detection of Hg2+ and Pb2+ by a coumarin-functionalized Schiff base in environmental and biosystems

Fluorescent chemosensors are often preferred for tracking toxic ions because of their non-destructive measurement and ease of use in environmental real samples and biosystems. Exploring high selectivity, great sensitivity, and biocompatible fluorophores with facile, accessible and dual-responsive features is currently highly demanding. A coumarin-based naphthol hydrazone Schiff base chemosensor, NaChro, is designed and synthesized in a two-step process to detect toxic metal ions with strong emission. Fluorescence spectra analysis demonstrates that the probe binds to Hg2+ and Pb2+ ions with a 1:1 and a 2:1 stoichiometry, respectively, with high sensitivity, short response time and minimal interference from other metal ions. The observed reversible turn-on reaction was attributed to the inhibition of C = N isomerization and excited-state intramolecular proton transfer (ESIPT) processes once the ions were introduced. The practical applications of NaChro are successfully addressed in paper strips, various water samples, HeLa cells and Zebrafish, demonstrating that the probe can detect and track Hg2+ and Pb2+ ions in environmental samples and biosystems.

Method for highly selective, ultrasensitive fluorimetric detection of Cu2+ and Al3+ by Schiff bases containing o-phenylenediamine and o-aminophenol

Schiff base probes (1 and 2) made from o-phenylenediamine and o-aminophenol were appeared as highly selective fluorimetric chemosensor of Cu²⁺ and Al³⁺ ions respectively. Strong fluorescence emission of probe 1 at 415 nm (excitation at 350 nm) was instantly turned off on addition of Cu²⁺. Very weak fluorescence of probe 2 at 506 nm (excitation at 400 nm) was immediately turned on specifically by Al³⁺. Job's plot and ESI-MS results suggested 1:1 molar stoichiometric ratio of metal ion and probe in their respective complexes. Probe 1 and 2 had demonstrated very low detection limit (9.9 and 2.5 nM respectively). Binding of Cu²⁺ with probe 1 was found chemically reversible on addition of EDTA, while complexation between Al³⁺ and probe 2 was not reversible. On the basis of density functional theory (DFT) and spectroscopic results, probable mode of sensing of the metal ions by the probes were proposed. Quenching of the fluorescence of probe 1 by Cu²⁺ was attributed to the extensive transfer of charge from the probe molecule to paramagnetic copper ion. Whereas, in the Al³⁺-complex of probe 2, photo-induced electron transfer (PET) process from the imine nitrogen to salicylaldehyde moiety was restricted and thereby the weak emission intensity of probe 2 was enhanced significantly. Effective pH range of sensing the metal ions by probe 1 and 2 were 4 to 8 and 6 to 10 respectively. Probe 1 was also applied in the design of a logic gate for Cu²⁺ detection. Moreover, probe 1 and 2 was also used in water sample analysis for quantitative estimation of Cu²⁺ and Al³⁺ respectively.

A naphthalimide functionalized chitosan-based fluorescent probe for specific detection and efficient adsorption of Cu2

As one of the most abundant metal ions, Cu²⁺ has turned into a great threat to human health and the natural environment due to its widely utilized in various industries. In this paper, a chitosan-based fluorescent probe CTS-NA-HY for detection and adsorption of Cu²⁺ was rationally prepared. CTS-NA-HY exhibited a specific "turn off" fluorescence response to Cu²⁺ and the fluorescence color changed from bright yellow to colorless. It possessed satisfactory detection performance to Cu²⁺ including good selectivity and anti-interference, low detection limit (29 nM) and wide pH range (4-9). The detection mechanism was confirmed by Job's plot, X-ray photoelectron spectroscopy, FT-IR and ¹H NMR analysis. Additionally, the probe CTS-NA-HY was capacity of determining Cu²⁺ in environmental water and soil samples. Besides, CTS-NA-HY-based hydrogel could also remove Cu²⁺ in aqueous solution effectively, which the ability of adsorption was greatly improved compared with original chitosan hydrogel.

A Bifunctional Fluorescence Probe Based on AIE-ICT Strategy for Visual Detection of Cu2+/Co2+ in Complex Matrix

A novel fluorescence chemical sensor-based probe 1-{[(E)-(2-aminophenyl)azanylidene]methyl}naphthalen-2-ol (AMN) was designed and synthesized, which performed a "naked eye" detection ability toward Cu²⁺ and Co²⁺ based on aggregation-induced emission (AIE) fluorescence strategy. It has sensitive detection ability for Cu²⁺ and Co²⁺. In addition, the color changed from yellow-green to orange under the sunlight, realizing the rapid identification of Cu²⁺/Co²⁺, which has the potential of on-site visual detection under the "naked eye". Moreover, different "on" and "off" fluorescence expressions were exhibited under excessive glutathione (GSH) in AMN-Cu²⁺ and AMN-Co²⁺ systems, which could be employed to distinguish Cu²⁺ from Co²⁺. The detection limits for Cu²⁺ and Co²⁺ were measured to be 8.29 × 10^-8 M and 9.13 × 10^-8 M, respectively. The binding mode of AMN was calculated to be 2:1 by Jobs' plot method analysis. Ultimately, the new fluorescence sensor was applied to detect Cu²⁺ and Co²⁺ in real samples (tap water, river water, and yellow croaker), and the results were satisfying. Therefore, this high-efficiency bifunctional chemical sensor platform based on "on-off" fluorescence detection will provide significant guidance for the advance development of single-molecule sensors for multi-ion detection.

Zinc ion detection using a benzothiazole-based highly selective fluorescence "turn-on" chemosensor and its real-time application

A new photochromic fluorescence chemosensor was devised and effectively synthesized using benzothiazole and imidazopyridine derivatives. A "turn-on" fluorescence sensor BIPP for Zn²⁺ detection was developed and has a quick response, excellent sensitivity, and remarkable selectivity over other metal ions. When Zn²⁺ was added to the BIPP solution, a new strong fluorescence emission peak at 542 nm formed with a considerable increase in intensity. The fluorescence color of the BIPP solution changed from blue to bright green. The binding ratio 8 : 2 was found between BIPP and Zn²⁺ by the results of Job's plot, HRMS and ¹H-NMR. The detection limit (LOD) of BIPP towards Zn²⁺ was determined to be 2.36 × 10^-8, which is remarkably low. The ability to detect Zn²⁺ in real water samples demonstrates that BIPP may also be used in environmental systems. Additionally, BIPP can be used to measure Zn²⁺ levels in living cells.

A novel hydrazone-based fluorescent "off-on-off" probe for relay sensing of Ga3+ and PPi ions

A novel hydrazone-based fluorescent probe (E)-3-((2-(benzo[d]thiazol-2-yl)hydrazono)methyl)-4H-chromen-4-one (BTC) has been rationally designed and synthesized. BTC can subsequently detect Ga³⁺ and PPi ions through the absorption and emission off-on-off response with high specificity. Importantly, fluorescent probe BTC can well discriminate Ga³⁺ from Al³⁺ and In³⁺. The association constant (K) was calculated as 2.06 × 10⁴M^-1, and the limit of detection (LOD) was calculated as 4.88 × 10^-2μM. Competitive binding studies also illustrated good results of the probe BTC towards Ga³⁺. Job's plot and HRMS results substantiated the 1:1 stoichiometry between BTC and Ga³⁺ ion. The interaction binding mode of BTC with Ga³⁺ was proposed by HRMS, ¹H NMR spectral titration, UV-vis absorption and fluorescence spectral measurements. The combination of the restraint of the photo-induced electron transfer (PET) process and the chelation enhanced fluorescence (CHEF) process is responsible for the fluorescence enhancement of this probe. The in situ chelated BTC-Ga³⁺ could further monitor pyrophosphate ion (PPi) by demetallization process with quenching fluorescence emission. Additionally, the BTC and BTC-Ga³⁺ showed good cell permeability and could detect Ga³⁺ and PPi ions in onioninner epidermal cells, respectively.

Portable, quantitative, and sequential monitoring of copper ions and pyrophosphate based on a DNAzyme-Fe3O4 nanosystem and glucometer readout

In this report, portable, quantitative, and sequential monitoring of copper ions and pyrophosphate (PPi) with a single sensor based on a DNAzyme-Fe₃O₄ system and glucometer readout was performed. Initially, streptavidin was functionalized on the surface of magnetic Fe₃O₄ spheres through glutaraldehyde. Then, an invertase-modified DNA Cu substrate was connected to the magnetic Fe₃O₄ spheres by a specific reaction between streptavidin and biotin. The sensing system was formed by a hybridization reaction between the Cu substrate and Cu enzyme. In the presence of Cu²⁺, Cu²⁺ will recognize the Cu DNA substrate and form an “off-on” signal switch, thereby resulting in the separation of invertase from the Fe₃O₄ nanospheres. PPi recognizes Cu²⁺ to form a Cu²⁺-PPi complex, resulting in an “on-off” signal switch. Under optimized conditions, linear detection ranges for Cu²⁺ and PPi of 0.01–5 and 0.5–10 μM, and detection limits for Cu²⁺ and PPi of 10 nM and 500 nM, respectively, were obtained. Good selectivity was achieved for the analysis of Cu²⁺ and PPi. Satisfactory results were achieved for this biosensor during the determination of Cu²⁺ in real tap samples and PPi in human urine samples. This verified that the sensor is portable and low cost, and can be applied to the sequential monitoring of multiple analytes with a single point-of-care biosensor.

Hydrazone derivative bearing coumarin for the relay detection of Cu2+ and H2S in an almost neat aqueous solution and bioimaging in lysosomes

A new morpholine functionalized coumarin-based fluorescent probe 1 was easily synthesized. The probe realized the sequentially detecting of Cu²⁺ and H₂S in the HEPES buffer solution (20 mM, pH = 5.0). It made a turn-off fluorescence response to Cu²⁺ by using a complex formation with a 2:1 binding mode, and the resulting complex was able to detect H₂S according to the displacement approach with a turn-on fluorescence response. The detecting limits of probe 1 for Cu²⁺ and 1-Cu²⁺ system for H₂S were calculated to be 26 nM and 88.5 nM, respectively. This "on-off-on" recognition process was demonstrated by ultraviolet-visible spectroscopy, fluorescence spectroscopy, using proton nuclear magnetic resonance studies, electrospray ionization mass spectroscopy, single crystal X-ray diffraction, and using density functional theory calculations. In addition, both cell imaging and co-staining experiments showed that the probe could be utilized to visually detect Cu²⁺ and H₂S in lysosomes.

Recent advances (2017-20) inthe detection of copper ion by using fluorescence sensors working through transfer of photo-induced electron (PET), excited-state intramolecular proton (ESIPT) and Förster resonance energy (FRET)

An essential trace element copper plays several physiological roles in living systems. But at excess concentration, it exerts toxicity and becomes associated with numerous disorders. In this article, we have reviewed the recent developments (from 2017 to 2020) in the field of fluorescence-based chemosensors for the detection of Cu²⁺ ion. The sensing probes which were built to work through transfer of photo-induced electron (PET), excited-state intramolecular proton (ESIPT) and Förster resonance energy (FRET) mechanisms have been included in this review. Emphasis is given on the design, sensitivity and response of the probe molecules for the detection of Cu²⁺ ion. Using suitable examples, applications of these three recognition mechanisms for the probing of copper ion have been addressed.

A turn-on luminescence probe based on amino-functionalized metal-organic frameworks for the selective detections of Cu2+, Pb2+ and pyrophosphate

A "turn-on" fluorescent probe based on amino-functionalized metal-organic frameworks (MOF-5-NH₂) is developed for the detection of Cu²⁺, Pb²⁺ and pyrophosphate (P₂O₇^4-, PPi). The fluorescence emission of fluorescent materials obtained by one-step synthesis is attributed to organic ligands. Cu²⁺ and Pb²⁺ coordinate with the amino group on the surface of the MOF-5-NH₂, which is ascribed to the host-guest electron transfer between analyte and probe, giving rise to the fluorescence quenching. After adding PPi, the intense affinity between Cu²⁺ and PPi remove Cu²⁺ from the MOF-5-NH₂, blocking of the electron transfer process, and the fluorescence can be recovered. The limit of detection is 0.057, 0.25 and 0.32 μmol L^-1 for the detection of Cu²⁺, Pb²⁺ and PPi, respectively. This turn-on mode based fluorescent probe shows preferable sensitivity and specificity to detect Cu²⁺, Pb²⁺ and PPi. These results demonstrate that the fluorescent MOF-5-NH₂ as a sensing platform displays remarkably performance.

Cu2+-selective NIR fluorescence sensor based on heptamethine cyanine in aqueous media and its application

A near-infrared (NIR) colorimetric fluorescence sensor, Cy7C3, based on heptamethine cyanine dye was synthesized for determining the presence of Cu²⁺ ions. The sensor showed highly sensitive fluorescence quenching toward Cu²⁺ ions in acetonitrile/buffer solution at physiological pH with long emission wavelength of 718 nm. Cy7C3 also provided an excellent selectivity to Cu²⁺ ions over other competing metal ions, with a low detection limit of 9 ppb, which was lower than the maximum concentration of Cu²⁺ ions in drinking water of U.S. EPA. Cy7C3 could achieve naked-eye detection of Cu²⁺ ions via the color change from blue to colorless, which allowed determination of Cu²⁺ ions in hydroponic fertilizers. Additionally, the sensor was developed to detect Cu²⁺ ions in HepG2 cancer cells via fluorescence imaging.