Coumarin based thiosemicarbazones as effective chemosensors for fluoride ion detection

Mechanistic analysis of viscosity-sensitive fluorescent probes for applications in diabetes detection

Diabetes is one of the most detrimental diseases affecting the human life because it can initiate several other afflictions such as liver damage, kidney malfunctioning, and cardiac inflammation. The primary method for diabetes diagnosis involves the analysis of blood samples to quantify the level of glucose, while secondary diagnostic methods involve the qualitative analysis of obesity, fatigue, etc. However, all these symptoms start showing up only when the patient has been suffering from diabetes for a certain period of time. In order to avoid such delay in diagnosis, the development of specific fluorescent probes has attracted considerable attention. Prominent biomarkers for diabetes include abundance of certain analytes in blood serum, e.g., glucose, methylglyoxal, albumin, and reactive oxygen species; high intracellular viscosity; alteration of enzyme functionality, etc. Among these, high viscosity can greatly affect the fluorescence properties of various chromophores owing to the environment sensitivity of fluorescence spectra. In this review article, we have illustrated the application of some prominent fluorophores such as coumarin, BODIPY, xanthene, and rhodamine in the development of viscosity-dependent fluorescent probes. Detailed mechanistic aspects determining the influence of viscosity on the fluorescent properties of the probes have also been elaborated. Fluorescence mechanisms that are directly affected by the high-viscosity heterogeneous microenvironment are based on intramolecular rotations like twisted intramolecular charge transfer (TICT), aggregation-induced emission (AIE), and through-bond energy transfer (TBET). In this regard, this review article will be highly useful for researchers working in the field of diabetes treatment and fluorescent probes. It also provides a platform for the planning of futuristic clinical translation of fluorescent probes for the early-stage diagnosis and therapy of diabetes.

Synthesis of novel 3-hydroxy-2-naphthoic hydrazones as selective chemosensors for cyanide ions

The development of an effective and selective chemosensor for CN^- ions has become the need of the hour due to their hazardous impact on the environment and humans. Herein, we report the synthesis of two novel chemosensors, IF-1 and IF-2 based on 3-hydroxy-2-naphthohydrazide and aldehyde derivatives that have shown selective sensing of CN^- ions. IF-2 exhibited exclusive binding with CN^- ions that is further confirmed by the binding constant value of 4.77 × 10⁴ M^-1 with a low detection limit (8.2 μM). The chemosensory potential is attributed to deprotonation of the labile Schiff base center by CN^- ions that results in a color change from colorless to yellow as visible by the naked eye. Accompanying this, a DFT study was also performed in order to find the interaction between the sensor (IF-1) and its ions (F^-). A notable charge transfer from 3-hydroxy-2-naphthamide to 2,4-di-tert-butyl-6-methylphenol, was indicated by the FMO analysis. The QTAIM analysis revealed that in the complex compound, the strongest pure hydrogen-hydrogen bonding was observed between H53 and H58, indicated by a ρ value of +0.017807. Due to its selective response, IF-2 can be successfully used for making test strips for the detection of CN^- ions.

Activated cascade effect for dual-mode ratiometric and smartphone-assisted visual detection of curcumin and F- based on nitrogen-doped carbon dots

The growing persistence of harmful ion or drug molecular residues has always been considered as a matter of concern due to its importance in biological and environmental processes, which requires taking measures to maintain environmental health sustainably and effectively. Inspired by the multi-system and visual quantitative detection of nitrogen-doped carbon dots (N-CDs), we develop a novel cascade nano-system based on dual emission carbon dots for on-site visual quantitative detection of curcumin and fluoride ion (F^-). Herein, tris (hydroxymethyl) aminomethane (Tris) and m-dihydroxybenzene (m-DHB) are elected as reaction precursors to synthesize dual-emission N-CDs by a one-step hydrothermal method. The obtained N-CDs exhibit dual emission peaks at 426 nm (blue) and 528 nm (green) with quantum yields of 53 % and 71 %, respectively. Then, trace curcumin and F^- intelligent off-on-off sensing probe is formed by taking advantage of the activated cascade effect. As for the occurrence of inner filter effect (IFE) and fluorescence resonance energy transfer (FRET), the green fluorescence of N-CDs quenches remarkably, called as OFF initial state. Then the curcumin-F^- complex leads to the hypochromatic shift of the absorption band from 532 to 430 nm, which activates the green fluorescence of N-CDs, named as ON state. Meanwhile, the blue fluorescence of N-CDs is quenched due to the FRET, called as OFF terminal state. This system shows good linear relationships from 0 to 35 μM and 0 to 40 μM with low detection limits of 29 nM and 42 nM for curcumin and F^- ratiometric detection, respectively. Moreover, a smartphone-assisted analyzer is developed for on-site quantitative detection. Furthermore, we design a logic gate for logistics information storage, which proves the possibility of a logic gate based on N-CDs in practical application. Thus, our work will provide an effective strategy for environmental quantitative monitoring and information storage encryption.

Design, Synthesis, and Density Functional Theory Studies of Indole Hydrazones as Colorimetric "Naked Eye" Sensors for F Ions

A new series of sensors SM-1 to SM-3 was designed and synthesized using indole carboxaldehydes (2a-2c) and 2,4-dinitrophenyl hydrazine. Accompanied by the synthesis, density functional theory investigation was also accomplished at the M06-2X/6-311G+(d,p) functional. A reduction in band gap (ΔE = 4.702-4.230 eV) along with a bathochromic shift (λ_max = 433.223-471.584 nm) was seen in deprotonated chromophores than their neutral sensors. Further, significant charge transference from indole toward dinitrophenyl hydrazine was also examined. Global reactivity parameters also expressed the greater stability of sensors than that of their deprotonated form. SM-3 displayed high selectivity toward F ions as compared to SM-1 and SM-2, which respond to both F^- and CN^- ions. The electronic absorption spectrum was recorded in CH₃CN. The sensor SM-3 showed high selectivity toward F^- ions with a low detection limit (8.69 × 10^-8), and the binding constant for SM-3 was determined as 7.7 × 10⁵. The sensor displayed naked eye views as the color of solution changed from mustard to purple with a red shift of 96 nm. The mechanism suggests deprotonation from the NH group, which was confirmed by ¹H NMR. The sensor is found to be useful for detection of F^- ions in the real sample and for analytical application (test strip).

A coumarin based Schiff Base: An effective colorimetric sensor for selective detection of F- ion in real samples and DFT studies

Chemosensors are molecular devices which react with target and give a visible signal, which is a degree of its sensitivity. Herein, a novel coumarin based Schiff Base has been synthesized for F^- ions detection. The chemosensor showed an intense color change upon the addition of F^- ions (light yellow to purple). The chemosensor has fewer effects of competing anions. The limit of detection is calculated as low as 1.1 × 10^-6 and the binding constant was determined as 1.61 × 10⁴. The job's plot confirmed 1:1 stoichiometry between chemosensor and F^- ion. The reverse reaction of chemosensor with MeOH is useful to construct a combinatorial logic circuit gates. The interaction mechanism of chemosensor was deliberated by ¹H NMR, FTIR, and DFT studies. Finally, the chemosensor was useful to detect F^- ions in tooth-paste sample and test strip is prepared for F^- ions detection.

Synthesis and evaluation of novel xanthene-based thiazoles as potential antidiabetic agents

A series of xanthene-based thiazoles was synthesized and characterized by different scpectroscopic methods, i.e. Proton nuclear magnetic resonance (¹ H NMR), carbon nuclear magnetic resonance (¹³ C NMR), infrared spectroscopy, carbon hydrogen nitrogen analysis, and X-ray crystallography. The inhibition potencies of 18 newly synthesized thiazole derivatives were investigated on the activities of acetylcholinesterase (AChE), butyrylcholinesterase (BChE), α-amylase (α-Amy), and α-glycosidase (α-Gly) enzymes in accordance with their antidiabetic and anticholinesterase ability. The synthesized compounds have the highest inhibition potential against the enzymes at low nanomolar concentrations. Among the 18 newly synthesized molecules, 3b and 3p were superior to the known commercial inhibitors of the enzymes and have a much more effective inhibitory potential, with IC₅₀ : 2.37 and 1.07 nM for AChE, 0.98 and 0.59 nM for BChE, 56.47 and 61.34 nM for α-Gly, and 152.48 and 124.84 nM for α-Amy, respectively. Finally, the optimized 18 compounds were subjected to molecular docking to describe the interaction between thiazole derivatives and AChE, BChE, α-Amy, and α-Gly enzymes in which important interactions were monitored with amino acid residues of each target enzyme.

Bis-pharmacophore of cinnamaldehyde-clubbed thiosemicarbazones as potent carbonic anhydrase-II inhibitors

Here, we report the synthesis, carbonic anhydrase-II (CA-II) inhibition and structure–activity relationship studies of cinnamaldehyde-clubbed thiosemicarbazones derivatives. The derivatives showed potent activities in the range of 10.3 ± 0.62–46.6 ± 0.62 µM. Among all the synthesized derivatives, compound 3n (IC₅₀ = 10.3 ± 0.62 µM), 3g (IC₅₀ = 12.1 ± 1.01 µM), and 3h (IC₅₀ = 13.4 ± 0.52 µM) showed higher inhibitory activity as compared to the standard inhibitor, acetazolamide. Furthermore, molecular docking of all the active compounds was carried out to predict their behavior of molecular binding. The docking results indicate that the most active hit (3n) specifically mediate ionic interaction with the Zn ion in the active site of CA-II. Furthermore, the The199 and Thr200 support the binding of thiosemicarbazide moiety of 3n, while Gln 92 supports the interactions of all the compounds by hydrogen bonding. In addition to Gln92, few other residues including Asn62, Asn67, The199, and Thr200 play important role in the stabilization of these molecules in the active site by specifically providing H-bonds to the thiosemicarbazide moiety of compounds. The docking score of active hits are found in range of − 6.75 to − 4.42 kcal/mol, which indicates that the computational prediction correlates well with the in vitro results.

Quinoline based thiosemicarbazones as colorimetric chemosensors for fluoride and cyanide ions and DFT studies

High toxicity and extensive accessibility of fluoride and cyanide ions in diverse environmental media encouraged attention for scheming well-organized probes for their detection. Keeping in mind we have designed and synthesized thiosemicarbazone-based chemosensors RB-1, RB-2 and RB-3 for the detection of fluoride and cyanide ions. The structural elucidation of the synthesized chemosensors is done by employing different analytical techniques including nuclear magnetic resonance and electronic absorption specrtoscopies. Admirable detection limit, binding constant and fast response time (2 s) to F⁻ and CN⁻ ions enlarged the applications of these chemosensors. Additional confirmation of the sensing ability of these chemosensors is derived from DFT and TDDFT calculations with M06/6-311G(d,p) method by performing FMO, UV–Vis, QTAIM and global reactivity parameters elucidation. Overall results point out that investigated chemosensors are suitable candidates for sensing the F⁻ ions. These chemosensors were successfully applied to detect F⁻ ions in a commercial toothpaste sample.