A hemicyanine-based near-infrared fluorescent probe for vapor-phase hydrazine detection and bioimaging in a complete aqueous media

Novel D-π-A hemicyanine dye as photoinitiators for in situ hydrogel formation and DLP printing

The field of biofabrication imposes stringent requirements on the polymerization activity and biosafety of photopolymeric hydrogel systems. In this investigation, we designed and synthesized four hemicyanine dyes with a D-π-A structure specifically tailored for biofabrication purposes. These novel dyes, incorporating carbazole (CZ), triphenylamine (TPA), anthracene (AN), and benzodithiophene (BDT) as electron donors, along with heterocyclic salt (IN) as electron acceptors, were prepared using a straightforward synthesis method. The absorption maxima of ANIN, CZIN, and TPAIN exceeded 500 nm, rendering them suitable co-initiators for the free radical photopolymerization of acrylates under green-red light exposure facilitated by light-emitting diodes (LEDs) and the co-initiator iodonium salt (ION). Notably, CZIN and TPAIN, due to their robust dye absorption and efficient electron transfer to ION, functioned as high-performance photosensitizers. Meanwhile, BDTIN, with its strong and broad absorption range (400-600 nm), enhanced the accuracy of visible light photopolymerization. These dyes exhibit characteristics such as facile synthesis, heightened photo stability, and non-toxicity and also demonstrate the ability to discern the alkalinity of a solution to some extent. Furthermore, we explored the application of these hemicyanine dyes in 3D printing, showing potential to enhance printing resolution in DLP 3D printing (digital light process 3D printing).

A wireless fluorescent sensing device for on-site closed-loop detection of hydrazine levels in the environment

Given the extensive need for the detection of hydrazine (N2H4) in the biomedical and chemical-pharmaceutical sectors, there is a necessity to devise a fast, sensitive, specific, and portable technique for precisely quantifying hydrazine at environmental levels. In our work, an "OFF-ON" type fluorescent probe namely 2-(4-(10-(naphthalen-2-yl)anthracen-9-yl)phenyl)isoindole-1,3-dione (NAP), which was inspired by the "Gabriel" reaction, was synthesized. The NAP fluorescent cellulose film successfully achieved the detection of hydrazine vapor with a LOD = 0.658 ppm. Compared to previous qualitative methods for detecting hydrazine, this study successfully achieved quantitative identification of hydrazine at low concentrations. In addition, a portable sensor device based on NAP cellulose film was successfully integrated, enabling ultra-sensitive, wireless, remote, and real-time detection of N2H4 vapor. It was determined that the probe (NAP) exhibited excellent detection performance when applied to various environmental samples including distilled water, tap water, creek water, soil and plants. This study introduces a potentially effective approach for detecting hydrazine in real-world settings.

Quinoline-derived electron-donating/withdrawing fluorophores for hydrazine detection and applications in environment and bioimaging

Substitution can be employed to competently tune the photophysical properties of chemosensors. The effect of substituents on the absorption and emission properties of quinoline probes was investigated. Therefore, salicylaldehyde (S), N-diethylamino-salicylaldehyde (D), and nitro-salicylaldehyde (W)-based quinoline Schiff base derivatives were investigated with hydrazine and studied for their photophysical properties. The nucleophilic substitution reaction was used as a sensing mechanism between the probes and hydrazine and investigated with 1H NMR, HR-MS characterizations, and DFT calculations. The sensitivity of QW-R is greater than that of QS-R and QD-R because of the stronger intramolecular charge transfer (ICT) in QW-R. The calculated LOD values are 28 nM for QS-R, 30 nM for QD-R, and 9 nM for QW-R. The probes were employed to monitor gaseous hydrazine using a smartphone and analyze solution forms of hydrazine in soil, water, and food samples, and living cells. Moreover, the in situ hydrazine release was monitored with bioimaging by administering an isoniazid drug. Significantly, the electronic effect of substituents over fluorescence showing, ranging from electron-donating to electron-withdrawing was investigated. We anticipate that this approach may be a promising strategy for the rational design of fluorescent sensors.

Advances in Optical Probes for the Detection of Hydrazine in Environmental and Biological Systems

Hydrazine, as a crucial raw material in the fine chemical industry, plays an indispensable role in fuel, catalyst, pesticide and drug synthesis. Due to its good water solubility and high toxicity, hydrazine can cause irreparable damage to water and soil in the environment, and it can also be released by taking certain drugs, which brings potential risks to human health. Therefore, it is vital to develop a method that can specifically detect hydrazine in the environment and in vivo. As an effective analysis and detection tool, fluorescence probe has attracted extensive attention in recent years. In this review, we summarized and classified hydrazine fluorescence probes based on various reaction mechanisms, and discussed their structures and applications in the past ten years. At least, we briefly outline the challenges and prospects in this field.

Synthesis and applications of a corrole-based dual-responsive fluorescent probe for separate detection of hydrazine and hydrogen sulfide

Here, a corrole-based dual-responsive fluorescent probe DPC-DNBS was rationally designed and synthesized for the separate detection of hydrazine (N₂H₄) and hydrogen sulfide (H₂S) with high selectivity and sensitivity. The probe DPC-DNBS is intrinsically none fluorescent due to PET effect, however, addition of increasing amount of N₂H₄ or H₂S to DPC-DNBS turned on an excellent NIR fluorescence centered at 652 nm and thereby provided a colorimetric signaling behavior. The sensing mechanism was verified by HRMS, ¹H NMR and the DFT calculations. Common metal ions and anions do not interfere with the interactions of DPC-DNBS with N₂H₄ or H₂S. Furthermore, the presence of N₂H₄ does not affect the detection of H₂S; however, the presence of H₂S interferes with the detection of N₂H₄. Hence, quantitative detection of N₂H₄ must occur in an H₂S-free environment. The probe DPC-DNBS displayed some fascinating merits in separate detection of these two analytes, including large Stokes shift (233 nm), fast response (15 min for N₂H₄, 30 s for H₂S), low detection limit (90 nM for N₂H₄, 38 nM for H₂S), wide pH range (6-12) and outstanding biological compatibility. Significantly, DPC-DNBS was utilized to detect hydrazine in real water, soil and food samples. And its favorable performances for separate detection N₂H₄ and H₂S were successfully demonstrated in HeLa cells and zebrafish, indicating its value of practical application in biology.

A near-infrared ratiometric fluorescent probe for hydrazine and its application for gaseous sensing and cell imaging

Hydrazine (N₂H₄) is a widely used raw material in the chemical industry, but at the same time hydrazine has extremely high toxicity. Therefore, the development of efficient detection methods is crucial for monitoring hydrazine in the environment and evaluating the biological toxicity of hydrazine. This study reports a near-infrared ratiometric fluorescent probe (DCPBCl₂-Hz) for the detection of hydrazine by coupling a chlorine-substituted D-π-A fluorophore (DCPBCl₂) to the recognition group acetyl. Due to the halogen effect of chlorine substitution, the fluorophore has an elevated fluorescence efficiency and a lowered pKa value and is suitable for physiological pH conditions. Hydrazine can specifically react with the acetyl group of the fluorescent probe to release the fluorophore DCPBCl₂, so the fluorescence emission of the probe system significantly shifted from 490 nm to 660 nm. The fluorescent probe has many advantages, such as good selectivity, high sensitivity, large Stokes shift, and wide applicable pH range. The probe-loaded silica plates can realize convenient sensing gaseous hydrazine with content down to 1 ppm (mg/m³). Subsequently, DCPBCl₂-Hz was successfully applied to detect hydrazine in soils. In addition, the probe can also penetrate living cells and allow the visualization of intracellular hydrazine. It can be anticipated that probe DCPBCl₂-Hz will be a useful tool for sensing hydrazine in biological and environmental applications.

A triphenylamine-based fluorescence probe for detection of hypochlorite in mitochondria

The level of HClO/ClO^- in mitochondria is essential to keep the normal function of mitochondria. Therefore, it is meaningful to accurately and quickly monitor ClO^- in mitochondria. In this work, a new triphenylamine-based fluorescence probe PDTPA was designed and synthesized, in which pyridinium salt and dicyano-vinyl group were introduced as mitochondria targeting site and reaction site for ClO^-. The probe showed high sensitivity and fast fluorescence response (<10 s) in the detection of ClO^-. Moreover, the probe PDTPA had good linearity in a wide concentration range of ClO^- and its detection limit was calculated as 10.5 μM. Confocal fluorescence images demonstrated that the probe could target mitochondria and track the fluctuations of endogenous/exogenous ClO^- levels in the mitochondria of living cells.

A coumarin-based fluorescent probe: single-wavelength excitation, discrimination of Cys/Hcy and GSH by naked eyes

Biothiols mainly include cysteine (Cys), homocysteine (Hcy) and glutathione (GSH), which play an important role in life activities and abnormal changes in their concentrations are closely related to certain diseases. Therefore, the quantitative tracking and analysis of biothiols in living organisms has become a hot research topic in recent years. In this work, a coumarin-based fluorescent probe COUN was designed and synthesized for the comparable color recognition of Cys/Hcy and GSH by introducing the phenylethynyl group as the recognition site of biothiols, which showed significant fluorescence enhancement and green fluorescence under the UV light at 365 nm. The probe specifically recognized Hcy, showing 40-fold fluorescence enhancement and strong green fluorescence at 492 nm. Moreover, there was a good linear relationship between the fluorescence intensity of the probe and certain concentrations of Cys/Hcy and GSH, with detection limits of 36.6 nM, 86.4 nM, and 174 nM, respectively. The recognition mechanism of COUN to distinguish Cys/Hcy and GSH was studied by TDDFT calculations. More importantly, COUN was successfully used for imaging biothiols in living cells. The results showed that this probe could provide an effective contribution to the understanding of the role of biothiols, especially Hcy.

Coumarin-cyanine hybrid: A ratiometric fluorescent probe for accurate detection of peroxynitrite in mitochondria

There is an urgent need to develop highly sensitive and selective fluorescence probes for ONOO^- in mitochondria. Herein, we reported a ratiometric fluorescent probe COUS with coumarin-cyanine hybrid as fluorophore and C = C bonds as reaction sites of ONOO^-. The probe COUS was sensitive and selective to ONOO^-, and had a large fluorescence emission shift (239 nm) as well as a low detection limit (41.88 nM). Moreover, COUS showed the mitochondrial targeting ability, and the targeting moiety could dissociate from the probe when reacting with ONOO^-, which enabled COUS to accurately detect ONOO^- in mitochondria.

De Novo Design of Activatable Photoacoustic/Fluorescent Probes for Imaging Acute Lung Injury In Vivo

Effective monitoring of the physiological progression of acute lung injury (ALI) in real time is crucial for early theranostics to reduce its high mortality. In particular, activatable fluorescence and photoacoustic molecule probes have attracted attention to assess ALI by detecting related indicators. However, the existing fluorophores often encounter issues of low retention in the lungs and slow clearance from the body, which compromise the probe's actual capability for in situ imaging by intravenous injection in vivo. Herein, a novel near-infrared hemicyanines fluorophore (FJH) bearing a quaternary ammonium group was first developed by combining with the rational design and screening strategy. The properties of good hydrophilicity and blood circulation effectively enable FJH accumulation for lung imaging. Inspired by the high retention efficiency, the probe FJH-C that turns on fluorescence and photoacoustic signals in response to the ALI indicator (esterase) was subsequently synthesized. Notably, the probe FJH-C successfully achieved the selectivity and sensitivity toward esterase in vitro and in living cells. More importantly, FJH-C can be further used to assess lipopolysaccharides and silica-induced ALI through the desired fluo-photoacoustic signal. Therefore, this study not only shows the first activatable probe for real-time imaging of lung function but also highlights the fluorophore structure with high lung retention. It is believed that FJH and FJH-C can serve as an efficient platform to reveal the pathological progression of other lung diseases for early diagnosis and medical intervention.

Activity-Based Fluorescent Probes Based on Hemicyanine for Biomedical Sensing

In recent years, fluorescent probes, as an analytical tool that can target and rapidly detect analytes, have been increasingly used for applications related to medical treatment, detection, and bioimaging. Researchers are interested in hemicyanine-based fluorescent probes because of their high quantum yield, tunable spectrum characteristics, absorption and emission in the near-infrared (NIR) region, and good photo-stability. The development of these dyes and their derivatives as NIR fluorescent probes for biological applications has advanced significantly in the last ten years. This review introduces processes for making hemicyanine dyes and the methodology for creating functional activity-based fluorescent probes. A variety of hemicyanine-based probes have been systematically developed for the detection of small biomolecules in various illnesses. Finally, the potential drawbacks of hemicyanine-based functional probes, and the prospects for future research and translation into clinical medicine, are also discussed. This study is intended to provide strategies for the development and design of novel fluorescence probes.