Use of Rapid Microbial Kits for Regular Monitoring of Food-contact Surfaces towards Hygiene Practices

Surface Hygiene Evaluation Method in Food Trucks as an Important Factor in the Assessment of Microbiological Risks in Mobile Gastronomy

Street food outlets are characterised by poor microbiological quality of the food and poor hygiene practices that pose a risk to consumer health. The aim of the study was to evaluate the hygiene of surfaces in food trucks (FT) using the reference method together with alternatives such as PetrifilmTM and the bioluminescence method. TVC, S. aureus, Enterobacteriaceae, E. coli, L. monocytogenes, and Salmonella spp. were assessed. The material for the study consisted of swabs and prints taken from five surfaces (refrigeration, knife, cutting board, serving board, and working board) in 20 food trucks in Poland. In 13 food trucks, the visual assessment of hygiene was very good or good, but in 6 FTs, TVC was found to exceed log 3 CFU/100 cm2 on various surfaces. The assessment of surface hygiene using various methods in the food trucks did not demonstrate the substitutability of culture methods. PetrifilmTM tests were shown to be a convenient and reliable tool for the monitoring of mobile catering hygiene. No correlation was found between the subjective visual method and the measurement of adenosine 5-triphosphate. In order to reduce the risk of food infections caused by bacteria in food trucks, it is important to introduce detailed requirements for the hygiene practices used in food trucks, including techniques for monitoring the cleanliness of surfaces coming into contact with food, in particular cutting boards and work surfaces. Efforts should be focused on introducing mandatory, certified training for food truck personnel in the field of microbiological hazards, appropriate methods of hygienisation, and hygiene monitoring.

Cleaning and disinfection programmes in food establishments: a literature review on verification procedures

In food establishments, cleaning and disinfection programmes contribute to provide the environmental conditions that are necessary for the production of safe and healthy food. Compliance with validated programmes is evaluated through verification activities, in order to establish, through objective evidence, if they are implemented as they were written and if they are effective, achieving continuous improvement of the sanitation programmes. In accordance with the specific guidelines of each country, food companies set up their technical specifications and develop their own cleaning and disinfection programmes. Depending on the analytical method used, one of the main challenges was to establish a reasonable limit of acceptability according to the impact that each surface has on the safety and hygiene of the food that is prepared. This review was focused on the procedures implemented to verify the cleaning and disinfection programmes in food establishments. In particular, this study examines the methodologies used (audits and analytical methods), sites for the collection of samples, acceptance criteria and main findings. The results of the analysed studies constitute a scientific basis for designing or improving sanitation procedures and their verification in food companies, and also provide relevant information for food safety authorities.

Self-disinfecting surfaces and infection control

According to World Health Organization, every year in the European Union, 4 million patients acquire a healthcare associated infection. Even though some microorganisms represent no threat to healthy people, hospitals harbor different levels of immunocompetent individuals, namely patients receiving immunosuppressors, with previous infections, or those with extremes of age (young children and elderly), requiring the implementation of effective control measures. Public spaces have also been found an important source of infectious disease outbreaks due to poor or none infection control measures applied. In both places, surfaces play a major role on microorganisms' propagation, yet they are very often neglected, with very few guidelines about efficient cleaning measures and microbiological assessment available. To overcome surface contamination problems, new strategies are being designed to limit the microorganisms' ability to survive over surfaces and materials. Surface modification and/or functionalization to prevent contamination is a hot-topic of research and several different approaches have been developed lately. Surfaces with anti-adhesive properties, with incorporated antimicrobial substances or modified with biological active metals are some of the strategies recently proposed. This review intends to summarize the problems associated with contaminated surfaces and their importance on infection spreading, and to present some of the strategies developed to prevent this public health problem, namely some already being commercialized.

Novel sensor platform for rapid detection and quantification of coliforms on food contact surfaces

In this paper, a novel sensor platform based on screen printed carbon electrode coated by graphene modified polyacrylamide gel (GR/PAAGC) was developed and implemented for sampling, detection and enumeration of coliform bacteria (coliforms) on food contact surfaces. The optimized formula of polyacrylamide (PAA) and agar-agar increased the adhesive properties of the gel, being crucial for the coliforms recovery, attached to food contact surfaces. The 6-Chloro-3-indoxyl-β-D-galactopyranoside (6-CIGP) was used as a new electrochemical reporter for β-D-galactosidase activity. The released 6,6'-Dichloro-Indigo (6-DI) was directly detected by GR/PAAGC sensor. The presence of Isopropyl-β-D-thiogalactopyranoside (IPTG) and n-Octyl-β-D-thiogalactopyranoside (OBDG) in the gel contributed to reduction of the detection time. The addition of graphene enhanced the voltammetric signal and increased the conductivity of PAA gel. The anodic and cathodic peaks of the released product were directly proportional to the concentration of coliforms. Bacterial cell concentrations ranging from 1.6log₁₀CFU/mL to 6.6log₁₀CFU/mL were detected. Well-shaped, sharp voltammetric curves were generated within 3 h. Redox peaks exhibited good sensitivity with detection limits (LOD) < 0.6log₁₀CFU/mL. After series of optimization experiments, coliforms ranging from 0.6log₁₀CFU/cm² to 6.6₁₀CFU/cm² on stainless steel surfaces have been detected within 30 min with a LOD of 0.1log₁₀CFU/cm². The developed rapid, sensitive, reproducible and specific sensor successfully applied for single detection as well as for real-time monitoring of growth of coliform bacteria on stainless steel surfaces during food processing.

Knowledge, Attitudes, and Hygienic Practices of Boiled Hypocotyls (Borassus aethiopum Mart) Vended in the Streets of Cotonou City and Its Outskirts, Benin

In Benin, the boiled hypocotyl (Borassus aethiopum Mart) is one of the most common street foods consumed for its therapeutic properties. However, the knowledge, attitudes, and practices of boiled hypocotyl food sellers are poorly known despite the high contamination potential of these street foods. This study aimed to determine the knowledge, attitudes, and practices of boiled hypocotyls food vendors in the streets of Cotonou and its outskirts. The approach used concerned the process of good hygiene and production. Face-to-face interviews of 300 hypocotyls vendors and producers from Cotonou, Sèmè, Ouidah, and Abomey-Calavi were conducted. Concurrently, 200 samples of boiled hypocotyl were collected among study vendors. Results showed that all of the interviewed population (100%) of this activity are women. They are generally illiterate and 75% of them have never been to school. Additionally, 76.7% of street boiled hypocotyls sellers interviewed were mobile. The microbial profile of the boiled hypocotyls showed the lack of control and poor understanding of hygiene rules. The processes management also revealed two diagrams processes. The conditions in which hypocotyls vendors operate are largely unacceptable from a food safety point of view and an effort should be made to provide them with adequate infrastructure including potable water. In view of the socioeconomic impact of hypocotyl activities in Benin and their role in the unexpected arrival of food-borne diseases, vendors should be regularly trained in order to prevent outbreaks of food-borne illnesses.