PM10 speciation and determination of air quality target levels. A case study in a highly industrialized area of Spain

Health threat of PM2.5-bound trace elements exposure on asthma hospital admission: A time-stratified case-crossover study

Environmental pollution of trace elements has become of main concern due to the adverse effects. To estimate the impact of PM_2.5-bound trace elements on human health, a time-stratified case-crossover study has been designed to examine the short-term associations between 28 elements and asthma hospitalizations from January 2019 to November 2021 in Xiamen, China. This research summarized the major components that pose health risks in different seasons and took risk assessment for different groups. We found that an inter-quartile range (IQR) increase of Ca, Fe, Mn, Pd, Si, and Ti was positively associated with the incidence of asthma in the lag of 0-4 days. In winter, the elements that predisposed the population to asthma attack were the most, such as Al, Ba, Ca, Cr, Cu, Fe, K, Mn, Pd, Si, and Ti, and these elements are at higher risk for longer periods of time. The discrepancy in risk levels and major elements of asthma diagnosis among various age groups were also found in this work. Our results provided insights into the development of specific policies to reduce the risk of asthma attacks due to exposure to PM_2.5-bound trace elements.

Comparison of concentrations of chemical species and emission sources PM2.5 before pandemic and during pandemic in Krakow, Poland

Observations of air pollution in Krakow have shown that air quality has been improved during the last decade. In the presented study two factors affecting the physicochemical characteristic of PM_2.5 fraction at AGH station in Krakow were observed. One is the ban of using solid fuels for heating purposes and the second is COVID-19 pandemic in Krakow. The PM_2.5 fraction was collected during the whole year every 3rd day between 2nd March 2020 and 28th February 2021 at AGH station in Krakow. In total 110 PM_2.5 fraction samples were collected. The chemical composition was determined for these samples. The elemental analysis was performed by energy dispersive X-ray fluorescence (EDXRF) technique, ions analysis was performed by ion chromatography (IC) and black carbon by optical method. In order to identify the emission sources the positive matrix factorization (PMF) was used. The results of such study were compared to similar analysis performed for PM_2.5 for the period from June 2018 to May 2019 at AGH station in Krakow. The PM_2.5 concentration dropped by 25% in 2020/2021 in comparison to 2018/2019 at this station. The concentrations of Si, K, Fe, Zn and Pb were lowering by 43-64% in the year 2020/2021 in comparison to 2018/2019. Cu, Mn, Zn and Pb come from mechanical abrasion of brakes and tires while Ti, Fe, Mn and Si are crustal species. They are the indicators of road dust (non-exhaust traffic source). Moreover, the annual average contribution of traffic/industrial/soil/construction work source was reduced in 2020/2021 in comparison to 2018/2019. As well the annual average contribution of fuels combustion was declining by 22% in 2020/2021 in comparison to 2018/2019. This study shows that the ban and lockdown, during COVID-19 pandemic, had significant impact on the characteristic of air pollution in Krakow.

Sustainability in Italian Ceramic Tile Production: Evaluation of the Environmental Impact

Sustainable development has recently become the driving force of all the policies leading environmental, economic, and social aspects of our life. In the construction sector, a large number of technological innovations has been introduced thus leading to an assessment of the environmental impact of the production processes. In the present study, the environmental impact of the Italian ceramic tiles production is analyzed and discussed. The evolution trends of the main atmospheric pollutants and the management of water and solid wastes of ceramic tile plants have been investigated over a period greater than 10 years, considering three different layouts of production cycles. The current evaluation shows that the Italian ceramic tiles industry has considered the environmental assessment as a fundamental practice for its development since the late 1980s. The reported data prove the high level of excellence reached by the Italian ceramic tile production and demonstrate how attention to the environmental impact is a fundamental key for the ceramic tile sector.

Characterization of PM2.5 sources in a Belgrade suburban area: a multi-scale receptor-oriented approach

Designated as the most harmful for health, PM_2.5 aerosol fraction was a subject of our study. It was collected for all four seasons during 2014/15 in the suburban area of Belgrade (Serbia) and analysed for Al, Si, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Br, As, Ba and Pb elements and for NH₄⁺, NO₃^- and SO₄^2- ions by particle-induced X-ray emission and ion chromatography techniques, respectively. Obtained concentrations have been treated by a combination of several receptor-oriented models to reveal source contributions to the suburban PM_2.5 at different spatial scales. Applied positive matrix factorization analysis indicated five main groups of emission sources: biomass burning (14.5%), traffic (3.9%), regional combustion/secondary sulphates (28.8%), local combustion/secondary nitrates (29.7%) and soil (5.4%). Local heating units had been pointed out as dominant contributors by long-range transport and ground-wind circulation analyses. Air masses circulating over the Balkan Peninsula denoted regional emissions as responsible for the high concentrations of secondary sulphates. Local and long-range transport analyses combined suggested that the BB and the LC/NO₃ originated from the wider urban area. Several Saharan dust episodes were detected as well. Presented results might be a basis for the development of air pollution mitigation strategies in the continental Balkan area, considered one of the most polluted and under-investigated European regions.

Air Quality Trend of PM10. Statistical Models for Assessing the Air Quality Impact of Environmental Policies

A statistical modelling of PM10 concentration (2006–2015) is applied to understand the behaviour, to know the influence of the variables to exposure risk, to treat the missing data to evaluate air quality, and to estimate data for those sites where they are not available. The study area, Castellón region (Spain), is a strategic area in the framework of EU pollution control. A decrease of PM10 is observed for industrial and urban stations. In the case of rural stations, the levels remain constant throughout the study period. The contribution of anthropogenic sources has been estimated through the PM10 background of the study area. The behaviour of PM10 annual trend is tri-modal for industrial and urban stations and bi-modal in the case of rural stations. The EU Normative suggests that 90% of the data per year are necessary to control air quality. Thus, interpolation statistical methods are presented to fill missing data: Linear Interpolation, Exponential Interpolation, and Kalman Smoothing. This study also focuses on testing the goodness of these methods in order to find the ones that better approach the gaps. After analyzing graphically and using the RMSE the last method is confirmed to be the best option.

The relationship between indoor and outdoor levels of PM10 and its chemical composition at schools in a coastal region in Spain

PM10 levels and its chemical composition were studied inside and outdoor of seven primary schools (3 in urban environment, 3 in industrial environment, 1 in rural environment) located in the Mediterranean coast in an area with an important industrial nucleus dedicated to the treatment of raw mineral materials. The main objective of this work is a comparison between these levels obtained inside and outside schools and also asses the influence of various natural and anthropogenic emission sources on particles concentrations found inside. The indoor airborne samples were collected using RespiCon TM. In the three outdoor sampling stations was used a minivol air sampler type 3.1 LVS of Derenda. PM10 Chemical composition was obtained by ICP-MS (elements) and ion chromatography The ratio I/O (indoor/outdoor) has been calculated taking into account only the samples taken in the same conditions. In all schools the ratio I/O for PM10 was greater than unity (between 1.3 and 7.8), indicating that existed significant indoor sources of these particles. In the three schools located in the industrial environment were collected PM10 samples inside and outside in non-teaching periods. Comparing the values of I/O when the classrooms were unoccupied with respect to the average value of these same schools when the classrooms are occupied, the behaviour is different depending on the location. On the other hand, a sample in an industrial school was obtained when some infrastructure works were being carried out outside of school. This caused a significant increase in the concentration of particles in the interior (I/O = 19.9). From the levels of As, Ni, Cd, Pb, Al, B, Zn, Mg, Sb, F⁻, ClO^2-, NO^3- and SO₄^2- in PM10 inside and outside of each school, also the ratios I/O were calculated. These chemical ratios I/O were higher than unity in all cases and generally higher than those recorded in the case of PM10. Finally, Pearson correlation coefficients (r) between the elements and anions and the PM10, and between the different elements and anions were calculated for the purpose of establishing the existence of common emission sources.

Typological Characterisation of Mineral and Combustion Airborne Particles Indoors in Primary Schools

This study was carried out using a scanning electron microscope (SEM) analysis of airborne fine particles and indoor samples, obtained in the interiors of seven primary schools located along the Mediterranean coast in an area with an important industrial nucleus. The objectives of this study are to create a catalogue that gathers the principle particles found in the three environments examined and to assess the influence of outside sources of particulate matter on particles found indoors. The particles identified in the fine particle samples have been grouped into two main groups: mineral compounds and particles originating from combustion processes. The mineral particles emanating from natural emissions and anthropogenics were classified according to their morphology into: isometric alotriomorphs or subidiomorphs, with tabular, acicular, and pure crystalline forms. The compounds originating from combustion processes present two types of morphology: spheric-like particles and dendritic soot ones. On the other hand, in lesser proportion, spherical particles were also identified as being associated with industrial processes at high temperatures. To conclude a summary table is presented, that gathers the characteristics (morphology, type and size) along with the origins of the principle particles identified in the interior airborne fine particle samples obtained from primary schools located in three different environments.

Variability of PM10 in industrialized-urban areas. New coefficients to establish significant differences between sampling points

One of the main problems that arise in the assessment of air quality in an area is to estimate the number of representative sampling points of each microenvironment within it. We present a new model that reduces the variability and increases the quality of the comparison of the sampling points. The study is based on the comparison between a city in eastern Spain, Vila-real, a macro city in México, Monterrey and the Piemonte region regarding the assessment of PM10 in microenvironments. Vila-real is located in the province of Castellón. This province is a strategic area in the framework of European Union (EU) pollution control. On the other hand, Monterrey in México, located in the northern state of Nuevo León, has several problems with particulate material in the atmosphere produced by the extraction of building materials in the hill that surround the city. Finally, the Piemonte region, which is located in the north of Italy, has to be in consideration due to higher concentrations of PM10 in the Po river basin. In the case of Vila-real the PM10 samples were collected by a medium volume sampler according to European regulations. Particle concentration levels were determined gravimetrically (EN 12341:1999). In the case of Monterrey the PM10 concentrations were determined by Beta Ray Attenuation according to US-EPA regulations. In the Piemonte region, the average concentration of PM10 was also obtained by means of the Beta Ray Attenuation as well as using gravimetric instruments. The methodology carried out in this paper is a useful tool for developing future Air Quality Plans in other industrialised areas.

Intervention assessments in the control of PM10 emissions from an urban waste transfer station

While vehicle emissions present the most widespread cause of breaches of EU air quality standards in urban areas of the UK, the greatest PM10 concentrations are often recorded close to small industrial sites with significant and long-term public exposure within close proximity. This is particularly the case in London, where monitoring in densely populated locations, adjacent to waste transfer stations (WTS), routinely report the highest PM10 concentrations in the city. This study aims to assess the impact of dust abatement measures taken at a WTS in west London and, in so doing, develop analysis techniques transferrable to other similar industrial situations. The study was performed in a 'blinded fashion', i.e., no details of operating times, activities or remediation measures were provided prior to the analysis. The study established that PM10 concentrations were strongly related to the industrial area's working hours and atmospheric humidity. The primary source of local particulate matter during working hours was found to be from the industrial area itself, not from the adjacent road serving the site. CUSUM analysis revealed a strong, sustained change point coinciding with a number of modifications at the WTS. Analysis suggested that introducing a vehicle washer bay, leading to a less dry and dusty yard, and ceasing stock piling and waste handling activities outside of the open shed had the greatest effect on PM10 concentrations. The techniques developed in this study should empower licensing authorities to more effectively characterise and mitigate particulate matter generated by urban industrial activities, thereby improving the health and quality of life of the local population.

Relevance of the economic crisis in chemical PM10 changes in a semi-arid industrial environment

This paper shows the changes in PM(10) levels and chemical composition in a region in southeast Spain between two periods: September 2005-August 2006 and June 2008-May 2009. PM(10) levels in this arid region, with a great number of cement, ceramic and related industries, have decreased in the second period in concordance with the reduction of industrial production due to the economic crisis and the closure of a cement plant. Annual average levels of PM(10) decreased from 41 μg m(-3) in 2005 to 30 μg m(-3) in 2008 (27%) and to 23 μg m(-3) in 2009 (23%). The relative contribution of the different sources has not changed in the area in the latter period and the elements with mineral origin are the main components of the PM(10) composition. There is a reduction in the concentration of the components that have soil-related industries and crustal material resuspension as their main sources, mainly in the case of CO(3) (2-), Ca, Sr, Tl and Pb, but the seasonal patterns were the same in both periods. As a particular case, there is an uncoupling between the seasonal evolution of SO(2) and sulphates in the two study periods, which remarks the existence of a sulphate regional background that does not depend on SO(2) local emissions. The decrease of V, Ni and Tl levels reflects the reduction of the industrial activity during the crisis period, affecting mainly the ceramic sector characterised by a great decrease of Tl levels.

Assesment of PM10 pollution episodes in a ceramic cluster (NE Spain): proposal of a new quality index for PM10, As, Cd, Ni and Pb

Environmental pollution control is one of the most important goals in pollution risk assessment today. In this sense, modern and precise tools that allow scientists to evaluate, quantify and predict air pollution are of particular interest. Monitoring atmospheric particulate matter is a challenge faced by the European Union. Specific rules on this subject are being developed (Directive 2004/107/EC, Directive 2008/50/EC) in order to reduce the potential adverse effects on human health caused by air pollution. Air pollution has two sources: natural and anthropogenic. Contributions from natural sources can be assessed but cannot be controlled, while emissions from anthropogenic sources can be controlled; monitoring to reduce this latter type of pollution should therefore be carried out. In this paper, we describe an air quality evaluation in terms of levels of atmospheric particles (PM10), as outlined by European Union legislation, carried out in an industrialised Spanish coastal area over a five-year period with the purpose of comparing these values with those of other areas in the Mediterranean Basin with different weather conditions from North of Europe. The study area is in the province of Castellón. This province is a strategic area in the frame work of European Union (EU) pollution control. Approximately 80% of European ceramic tiles and ceramic frit manufacturers are concentrated in two areas, forming the so-called "ceramics clusters"; ones in Modena (Italy) and the other in Castellón. In this kind of areas, there are a lot of air pollutants from this industry then it is difficult to fulfill de European limits of PM10 so it is necessary to control the air quality in them. The seasonal differences in the number of days in which pollutant level limits were exceeded were evaluated and the sources of contamination were identified. Air quality indexes for each pollutant have been established to determine easily and clearly the quality of air breathed. Furthermore, in accordance with Directive 2008/50/EC, an Air Quality Plan is proposed to protect human health, and the environment as a whole, in the study area. General and specific corrective measures of main emission sources are provided. A strategy for air pollution management is thus presented.

Drugs of abuse in airborne particulates in urban environments

The presence of cocaine, heroin, cannabinoids and amphetamines, among other drugs of abuse, was detected in airborne particulates in urban environments in Spain. The levels of these compounds were determined at air quality monitoring sites by the application of a novel and specifically targeted analytical methodology, by which mean daily concentrations of cocaine (204-480 pg/m(3), up to one order of magnitude higher than in Italy and Portugal), cannabinoids (THC, 27-44 pg/m(3)), amphetamine (1.4-2.3 pg/m(3)) and heroin (9-143 pg/m(3)) were determined in the atmosphere. Results allowed detecting common temporal consumption patterns between cocaine and cannabis (with week-end maxima), but markedly distinct consumer groups. Personal exposure to the levels of all the drugs detected may be considered negligible, posing no harm for human health. Given the worldwide scarcity of data on drug levels in atmospheric particulates, we present this methodology as a fast, economic and reliable tool to obtain high quality data for the monitoring of drug abuse and drug dealing in cities. Applications include the detection of changes in drug consumption trends, the mapping of drug consumption and/or dealing areas in cities, and the identification of new emerging drugs.

Effect of ceramic industrial particulate emission control on key components of ambient PM10

The relationship between specific particulate emission control and ambient levels of some PM(10) components (Zn, As, Pb, Cs, Tl) was evaluated. To this end, the industrial area of Castellón (Eastern Spain) was selected, where around 40% of the EU glazed ceramic tiles and a high proportion of EU ceramic frits are produced. The PM(10) emissions from the ceramic processes were calculated over the period 2000-2006, taking into account the degree of implementation of corrective measures throughout the study period. Abatement systems were implemented in the majority of the fusion kilns for frit manufacture in the area as a result of the application of the Directive 1996/61/EC, leading to a marked decrease in PM(10) emissions. By contrast, emissions from tile manufacture remained relatively constant because of the few changes in the implementation of corrective measures. On the other hand, ambient PM(10) levels and composition measurements were carried out from 2002 to 2006. A high correlation between PM(10) emissions from frit manufacture and ambient levels of Zn, As, Pb and Cs (R(2) from 0.61 to 0.98) was observed. On the basis of these results, the potential impact of the implementation of corrective measures to reduce emissions from tile manufacture was quantified, resulting in a possible decrease of 3-5 microg/m(3) and 2 microg/m(3) in ambient mineral PM(10) (on an annual basis) in urban and suburban areas, respectively. This relatively simple methodology allows us to estimate the direct effect of a reduction in primary particulate emissions on ambient levels of key particulate components, and to make a preliminary quantification of the possibilities of air quality improvement by means of further emission reduction. Therefore, it is a useful tool for developing future air quality plans in the study area and in other industrialised areas.

PM sources in a highly industrialised area in the process of implementing PM abatement technology. Quantification and evolution

Principal component analysis (PCA) coupled with a multilinear regression analysis (MLRA) was applied to PM(10) speciation data series (2002-2005) from four sampling sites in a highly industrialised area (ceramic production) in the process of implementing emission abatement technology. Five common factors with similar chemical profiles were identified at all the sites: mineral, regional background (influenced by the industrial estate located on the coast: an oil refinery and a power plant), sea spray, industrial 1 (manufacture and use of glaze components, including frit fusion) and road traffic. The contribution of the regional background differs slightly from site to site. The mineral factor, attributed to the sum of several sources (mainly the ceramic industry, but also with minor contributions from soil resuspension and African dust outbreaks) contributes between 9 and 11 microg m(-3) at all the sites. Source industrial 1 entails an increase in PM(10) levels between 4 and 5 microg m(-3) at the urban sites and 2 microg m(-3) at the suburban background site. However, after 2004, this source contributed less than 2 microg m(-3) at most sites, whereas the remaining sources did not show an upward or downward trend along the study period. This gradual decrease in the contribution of source industrial 1 coincides with the implementation of PM abatement technology in the frit fusion kilns of the area. This relationship enables us to assess the efficiency of the implementation of environmental technologies in terms of their impact on air quality.