The efficiency of combined CaO/electrochemical treatment in removal of acid mine drainage induced toxicity and genotoxicity

A review: The formation, prevention, and remediation of acid mine drainage

In abandoned open-pit coal mines, surface water and groundwater form acidic waters with high concentrations of metal ions due to chemical interactions with ores such as pyrite, and the formation of acid mine drainage (AMD) is one of the major sources of pollution of world concern. For this reason, this paper reviews the formation mechanisms and influencing factors of AMD. It also describes the prediction, prevention, and remediation techniques for AMD, identifying key research gaps. It also discusses the current challenges and shortcomings faced globally in the management of AMD. The formation of AMD is mainly caused by the oxidation of pyrite in mines, but it is mainly influenced by history, climate, topography, and hydrogeology, making the formation mechanism of AMD extremely complex. Currently, the remediation technologies for AMD mainly include active treatment and passive treatment, which can effectively neutralize acidic wastewater. However, the prediction technology for AMD is blank, and the source treatment technology such as passivation and microencapsulation only stays in the experimental stage. This leads to the high cost of treatment technologies at this stage and the inability to identify potential risks in mines. Overall, this review provides remediation tools for AMD from predicting root causes to treatment. Geophysical technology is an effective method for predicting the motion path and pollution surface of AMD in the future, and resource recovery for AMD is a key point that must be paid attention to in the future. Finally, integrated treatment technologies that deserve further exploration need to be emphasized.

An overview of the application of electrocoagulation for mine wastewater treatment

One of the challenges of the twenty-first century is related to the discharge and disposal of mine effluents and wastewater resulting from mine dewatering, precipitation, and surface runoff in mines, especially acidic effluents that contain a variety of toxic and heavy metals and are the main sources of surface and groundwater pollution. Various physical, chemical, and biological methods have been developed and used to treat mine effluents. All proposed methods have their own disadvantages that make their use challenging. One of the new methods used for wastewater treatment is the electrical coagulation process, which has attracted the attention of researchers in recent years due to its advantages such as simplicity, environmental friendliness, and low cost. The present review focused on the applications of electrocoagulation for mine wastewater treatment as well as metals recovery. In addition, the main mechanisms, advantages, and weaknesses of electrocoagulation were reviewed.

Effects of cadmium sulfide nanoparticles on sulfate bioreduction and oxidative stress in Desulfovibrio desulfuricans

Sulfate-containing wastewater has a serious threat to the environment and human health. Microbial technology has great potential for the treatment of sulfate-containing wastewater. It was found that nano-photocatalysts could be used as extracellular electron donors to promote the growth and metabolic activity of non-photosynthetic microorganisms. However, nano-photocatalysts could also induce oxidative stress and damage cells. Therefore, the interaction mechanism between photosynthetic nanocatalysts and non-photosynthetic microorganisms is crucial to determine the regulatory strategies for microbial wastewater treatment technologies. In this paper, the mechanism and regulation strategy of cadmium sulfide nanoparticles (CdS NPs) on the growth of sulfate-reducing bacteria and the sulfate reduction process were investigated. The results showed that the sulfate reduction efficiency could be increased by 6.4% through CdS NPs under light conditions. However, the growth of Desulfovibrio desulfuricans C09 was seriously inhibited by 55% due to the oxidative stress induced by CdS NPs on cells. The biomass and sulfate reduction efficiency could be enhanced by 6.8% and 5.9%, respectively, through external addition of humic acid (HA). At the same time, the mechanism of the CdS NPs strengthening the sulfate reduction process by sulfate bacteria was also studied which can provide important theoretical guidance and technical support for the development of microbial technology combined with extracellular electron transfer (EET) for the treatment of sulfate-containing wastewater.

Use of Electrocoagulation for Treatment of Pharmaceutical Compounds in Water/Wastewater: A Review Exploring Opportunities and Challenges

Increasing dependency on pharmaceutical compounds including antibiotics, analgesics, antidepressants, and other drugs has threatened the environment as well as human health. Their occurrence, transformation, and fate in the environment are causing significant concerns. Several existing treatment technologies are there with their pros and cons for the treatment of pharmaceutical wastewater (PWW). Still, electrocoagulation is considered as the modern and decisive technology for treatment. In the EC process, utilizing electricity (AC/DC) and electrodes, contaminants become coagulated with the metal hydroxide and are separated by co-precipitation. The main mechanism is charge neutralization and adsorption of contaminants on the generated flocs. The range of parameters affects the EC process and is directly related to the removal efficiency and its overall operational cost. This process only could be scaled up on the industrial level if process parameters become optimized and energy consumption is reduced. Unfortunately, the removal mechanism of particular pharmaceuticals and complex physiochemical phenomena involved in this process are not fully understood. For this reason, further research and reviews are required to fill the knowledge gap. This review discusses the use of EC for removing pharmaceuticals and focuses on removal mechanism and process parameters, the cost assessment, and the challenges involved in mitigation.

Combined electrocoagulation processes as a novel approach for enhanced pollutants removal: A state-of-the-art review

A novel approach using the integration of electrocoagulation, with one or more treatment processes has been recently practiced to improve the removal of colloidal and non-biodegradable pollutants. Several treatment processes including adsorption, chemical coagulation, magnetic field, reverse osmosis, and membrane filtration have been combined with electrocoagulation treatment step to improve pollutants removal efficiency. These combined systems showed the potential to improve the performance of the treatment process. This paper presents a state-of-the-art review for the recent processes available in the literature that combine treatment electrocoagulation with one of the previously mentioned treatment processes. It is found that the removal efficiency of any combined processes is higher than that of any single treatment process and the combined process has up to 20% higher removal efficiency compared to electrocoagulation alone. However, most reported studies were conducted at bench-scale level with synthetic wastewater instead of real wastewater. The main aspects of these combined systems including process mechanism, kinetic models, cost and the scale up of combined processes were discussed and summarized. Finally, several concluding remarks were drawn in view of the literature investigations and the gaps that suggest more studies and insights for future development were addressed.

Effect of the electrocoagulation process on the toxicity of gold mine effluents: A comparative assessment of Daphnia magna and Daphnia pulex

Mine effluents must meet discharge criteria for both physicochemical parameters and toxicity. While chemical precipitation is efficient for the treatment of metallic elements in mine effluents, the removal of sulfates, as a source of salinity and potential toxicity, is limited by gypsum solubility. This study evaluated the efficiency of electrocoagulation (EC), an emerging process to treat mine water, in removing sulfates and acute toxicity in two gold mine effluents (E1 and E2), before and after treatment (Fe-electrodes, 30 min at 20 mA/cm², and pH near neutrality). Standard toxicity tests were conducted on two daphnia species, Daphnia magna (standard test species) and Daphnia pulex (more common in cold climate). Four uncontaminated surface waters (S#1 to S#4), which originated from different watershed lithologies, were also used as dilution media with E1 to assess water quality effect on toxicity response. Statistical analyses using the Student's t-test showed no significant difference in immobility or mortality caused by surface waters on either D. magna or D. pulex species (p > 0.05). However, higher toxicity was observed with both daphnia when reconstituted hard water was used for testing of the treated effluent E2. The present study highlights the toxicity effect added by EC despite a sulfates-related salinity decrease of >7.5%. Further research should identify and confirm the potential sources of observed toxicity.

Mobility and natural attenuation of metals and arsenic in acidic waters of the drainage system of Timok River from Bor copper mines (Serbia) to Danube River

Bor, Krivelj, and Bela Rivers belong to the watershed of Timok River, which is a tributary of transboundary Danube River. These rivers receive metal-rich acidic wastewater from metallurgical facilities and acid mine drainage (AMD) from mine wastes around Bor copper mines. The aim of this study was to determine the mobility and natural attenuation of metals and arsenic in rivers from Bor copper mines to Danube River during the year 2015. The results showed that metallurgical facilities had the largest impact on Bor River by discharging about 400 t of Cu per year through highly acidic wastewater (pH = 2.6). The highest measured concentrations of Cu in river water and sediments were 40 mg L^-1 and 1.6%, respectively. Dissolution of calcite from limestone bedrock and a high concentration of bicarbonate ions in natural river water (about 250 mg L^-1) enhanced the neutralization of acidic river water and subsequent chemical precipitation of metals and arsenic. Decreases in the concentrations of Al, Fe, Cu, As, and Pb in river water were mainly due to precipitation on the river bed. On the other hand, dilution played an important role in the decreases in concentrations of Mn, Ni, Zn, and Cd. Chemically precipitated materials and flotation tailings containing Fe-rich minerals (fayalite, magnetite, and pyrite) were transported toward Danube River during the periods of high discharge. This study showed that processes of natural attenuation in catchments with limestone bedrock play an important role in reducing concentrations of metals and arsenic in AMD-bearing river water.

Efficacy of Allium cepa test system for screening cytotoxicity and genotoxicity of industrial effluents originated from different industrial activities

Efficacy of Allium cepa test system for screening cytotoxicity and genotoxicity of treated effluents originated from four types of industrial activities (two textile industries, three rubber based industries, two common treatment plants of industrial zones, and two water treatment plants) was assessed. Physico-chemical parameters including the heavy metal/metalloid levels of the effluents varied depending on the industry profile, but most of the measured parameters in the effluents were within the specified tolerance limits of Sri Lankan environmental regulations for discharge of industrial effluents into inland surface waters. In the A. cepa test system, the undiluted effluents induced statistically significant root growth retardation, mitosis depression, and chromosomal aberrations in root meristematic cells in most cases in comparison to the dilution water and upstream water signifying effluent induced cytotoxicity and genotoxicity. Ethyl methane sulphonate (a mutagen, positive control) and all the effluents under 1:8 dilution significantly induced total chromosomal aberrations in root meristematic cells in comparison to the dilution water and upstream water indicating inadequacy of expected 1:8 dilutions in the receiving waters for curtailing genotoxic impacts. The results support the use of a practically feasible A. cepa test system for rapid screening of cytotoxicity and genotoxicity of diverse industrial effluents discharging into inland surface waters.