The effect of hydraulic retention time in onsite wastewater treatment and removal of pharmaceuticals, hormones and phenolic utility substances

Navigating the complex landscape of waterborne disease research

Waterborne pathogens and associated diseases continue to pose a significant global health challenge, requiring effective monitoring, detection, and treatment strategies. This review examines the current state of waterborne pathogen management, highlighting persistent issues and recent advancements. Here, we review cutting-edge detection methods and treatment technology, emphasizing their roles in water safety and outbreak prevention. The impact of climate change on waterborne pathogen dynamics is explored, alongside a discussion of interdisciplinary research approaches. We also aimed to investigate the crucial relationship between waterborne disease control and Sustainable Development Goals (SDGs), focusing on community engagement, well-being, water sanitation, public health policies, and international cooperation. The PRISMA protocol systematic process was used to filter papers for this study and carry out the review process. Machine learning and remote sensing techniques are promising features in the pathogen detection field. SDGs 3, 6, 11, 13, and 17 are the most closely interrelated with waterborne diseases. This review provides an in-depth overview of waterborne pathogen management, contributing to improved global water quality and public health strategies. This integrated approach aims to enhance health outcomes and promote resilience against waterborne diseases, particularly for vulnerable communities.

Insights into the efficiencies of different biological treatment systems for pharmaceuticals removal: A review

This review presents a comprehensive analysis of current research on biological treatment processes for removing pharmaceutical compounds (PhCs) from wastewater. Unlike previous studies on this topic, our study specifically delves into the effectiveness and drawbacks of various treatment approaches such as traditional wastewater treatment facilities (WWTP), membrane bioreactors (MBRs), constructed wetlands (CW), and moving bed biofilm reactors (MBBR). Through the examination and synthesis of information gathered from more than 200 research studies, we have created a comprehensive database that delves into the effectiveness of eliminating 19 particular PhCs, including commonly studied compounds such as acetaminophen, ibuprofen, diclofenac, naproxen, ketoprofen, indomethacin, salicylic acid, codeine, and fenoprofen, amoxicillin, azithromycin, ciprofloxacin, ofloxacin, tetracycline, atenolol, propranolol, and metoprolol. This resource provides a depth and scope of information that was previously lacking in this area of study. Notably, among these pharmaceuticals, azithromycin demonstrated the highest removal rates across all examined treatment systems, with the exception of WWTPs, while carbamazepine consistently exhibited the lowest removal efficiencies across various systems. The analysis showcases the diverse results in removal efficiency impacted by factors such as system configuration, operation specifics, and environmental circumstances. The findings emphasize the critical need for continued innovation and research, specifically recommending the integration of advanced oxidation processes (AOPs) with existing biological treatment methods to improve the breakdown of recalcitrant compounds like carbamazepine. PRACTITIONER POINTS: Persistent pharmaceuticals harm aquatic ecosystems and human health. Biological systems show varying pharmaceutical removal efficiencies. Enhancing HRT and SRT improves removal but adds complexity and costs. Tailored treatment approaches needed based on contaminants and conditions.

Catchment area, fate, and environmental risks investigation of micropollutants in Danish wastewater

This study aimed to investigate the spatial distribution of micropollutants in wastewater related to catchment area, and their environmental risks and fate. About 24-h flow proportional effluent (n = 26) wastewater samples were collected from eight WWTPs across Denmark. From five of these WWTPs corresponding influent samples (n = 20) were collected. Samples were enriched by multi-layer solid phase and analysed by liquid chromatography-high-resolution mass spectrometry and comprehensive two-dimensional gas chromatography with high-resolution mass spectrometry detection. We detected and quantified 79 micropollutants from a list of 291 micropollutants in at least one influent or effluent wastewater sample. From this we found that 54 micropollutants decreased in concentrations during wastewater treatment, while O-desmethylvenlafaxine, carbamazepine, amitriptyline, benzothiazole, terbutryn, and citalopram increased in concentrations through the WWTP.The toxicity of effluent wastewater samples was assessed by EC50 using Raphidocelis subcapitata (R. subcapitata) and LC50 using the crustacean Daphnia magna (D. Magna), for which six micropollutants were detected above the predicted no-effect concentration. Our study demonstrates that catchment area influences the micropollutant composition of wastewater. Out of 19 pharmaceuticals, the measured concentration in influent wastewater was predicted within a factor of 10 from sale numbers and human excretion, which demonstrates the strong influence of catchment area on micropollutant composition.

Trends in removal of pharmaceuticals in contaminated water using waste coffee and tea-based materials with their derivatives

The introduction of large amounts of pharmaceuticals into the environmental waters is well-documented in literature with their occurrence reported in all different water matrices accessible to humans and animals. At the same time, the increasing consumption of coffee and tea-based beverages results in the generation of solid waste, which is mostly disposed-off in the environment. To minimize environmental pollution, coffee and tea-based materials have been proposed as suitable options to remove pharmaceuticals in environmental waters. Therefore, this article provides a critical review on the preparation and applications of coffee and tea-based materials in removing pharmaceuticals from contaminated water. In this context, most studies in literature focused on the applications of these materials as adsorbents, while only limited work on their role in degradation of pharmaceuticals is discussed. The successful application in adsorption studies is attributed to high surface areas of adsorbents and the ability to easily modify the adsorbent surfaces by incorporating functional groups that provide additional oxygen atoms, which promote easy interactions with pharmaceuticals. Hence, the adsorption mechanisms are mostly described by hydrogen bonding, electrostatic and π-π interactions with sample pH playing a dominant role in the adsorption process. Overall, the present article focused on the developments, trends and future research direction on the preparations and applications of coffee and tea-based materials for efficient removal of pharmaceuticals in water. PRACTITIONER POINTS: Review of tea and coffee wastes application for removal of pharmaceuticals in water Key applications in adsorption and degradation of pharmaceuticals in water Removal mostly explained by hydrogen bonding, electrostatic, and π-π interactions Trends, gaps, and future research to be explored are reviewed and highlighted.

Holistic approach to chemical and microbiological quality of aquatic ecosystems impacted by wastewater effluent discharges

Wastewater treatment plants (WWTPs) collect wastewater from various sources and use different treatment processes to reduce the load of pollutants in the environment. Since the removal of many chemical pollutants and bacteria by WWTPs is incomplete, they constitute a potential source of contaminants. The continuous release of contaminants through WWTP effluents can compromise the health of the aquatic ecosystems, even if they occur at very low concentrations. The main objective of this work was to characterize, over a period of four months, the treatment steps starting from income to the effluent and 5 km downstream to the receiving river. In this context, the efficiency removal of chemical pollutants (e.g. hormones and pharmaceuticals, including antibiotics) and bacteria was assessed in a WWTP case study by using a holistic approach. It embraces different chemical and biological-based methods, such as pharmaceutical analysis by HPLC-MSMS, growth rate inhibition in algae, ligand binding estrogen receptor assay, microbial community study by 16S and shotgun sequencing along with relative quantification of resistance genes by quantitative polymerase chain reaction. Although both, chemical and biological-based methods showed a significant reduction of the pollutant burden in effluent and surface waters compared to the influent of the WWTP, no complete removal of pollutants, pathogens and antibiotic resistance genes was observed.

Digging deep into a GAC filter - Temporal and spatial profiling of adsorbed organic micropollutants

A large pilot-scale granular activated carbon (GAC) filter was operated downstream in a full-scale wastewater treatment plant to remove organic micropollutants. To describe the spatial and temporal developments of micropollutant adsorption profiles in the GAC filter, micropollutants were extracted from GAC media taken at various filter depths and number of treated bed volumes. At a low number of treated bed volumes (2600 BVs), most micropollutants were adsorbed in the top layers of the filter. At increasing number of treated bed volumes (7300-15,500 BVs), the adsorption front for micropollutants progressed through the filter bed at varying rates, with sulfamethoxazole, fluconazole, and PFOS reaching the bottom layer before carbamazepine and other well-adsorbing micropollutants, such as propranolol and citalopram. Higher amounts of adsorbed micropollutants in the bottom layer of the filter bed resulted in decreased removal efficiencies in the treated wastewater. Mass estimations indicated biodegradation for certain micropollutants, such as naproxen, diclofenac, and sulfamethoxazole. A temporary increase in the concentration of the insecticide imidacloprid could be detected in the filter indicating that extraction of adsorbed micropollutants could provide an opportunity for backtracking of loading patterns.

Treatment of Pharma Effluent using Anaerobic Packed Bed Reactor

The treatment of pharmaceutical effluent using an appropriate technology has become so important. Anaerobic packed bed reactor is an efficient method for pharmaceutical effluent treatment because of the high organic content present in it. In this study, a heavy-polluted pharma effluent is treated using an anaerobic packed bed reactor. The performance of the anaerobic reactor was identified with respect to chemical oxygen demand (COD) removal, methane yield, and gas production. The results showed that COD was reduced from 73% to 60% for an organic loading rate (OLR) of 0.6036–1.7487 kg COD m⁻³·d⁻¹. As the OLR increases, the removal efficiency of COD decreases gradually to around 52% for an OLR of 2.34 kg COD m⁻³·d⁻¹.

Elevated levels of antibiotic resistance in groundwater during treated wastewater irrigation associated with infiltration and accumulation of antibiotic residues

Treated wastewater irrigation (TWW) releases antibiotics and antibiotic resistance genes (ARGs) into the environment and might thus promote the dissemination of antibiotic resistance in groundwater (GW). We hypothesized that TWW irrigation increases ARG abundance in GW through two potential mechanisms: the contamination of GW with resistant bacteria and the accumulation of antibiotics in GW. To test this, the GW below a real-scale TWW-irrigated field was sampled for six months. Sampling took place before, during and after high-intensity TWW irrigation. Samples were analysed with 16S rRNA amplicon sequencing, qPCR of six ARGs and the class 1 integron-integrase gene intI1, while liquid chromatography tandem mass spectrometry was performed to detect antibiotic and pharmaceutical residues. Absolute abundance of 16S rRNA in GW decreased rather than increased during long-term irrigation. Also, the relative abundance of TWW-related bacteria did not increase in GW during long-term irrigation. In contrast, long-term TWW irrigation increased the relative abundance of sul1 and intI1 in the GW microbiome. Furthermore, GW contained elevated concentrations of sulfonamide antibiotics, especially sulfamethoxazole, to which sul1 confers resistance. Total sulfonamide concentrations in GW correlated with sul1 relative abundance. Consequently, TWW irrigation promoted sul1 and intI1 dissemination in the GW microbiome, most likely due to the accumulation of drug residues.

Enhancement of algae ponds for rural domestic sewage treatment by prolonging daylight using artificial lamps

Algal ponds (APs) are widely used as treatment facilities for domestic sewage in sparsely populated rural areas. However, few AP studies have focused on daylight length to enhance pollutants removal. In this study, four algae ponds were set up, daylight was prolonged by 0, 2, 4, and 6 h with an illuminating intensity of 3000 lx. The highest removal efficiencies of total nitrogen, ammonium, and total phosphorus were 37.36%, 41.20%, and 21.56% due to the highest microbial abundance under optimum conditions (2 h PD), respectively. Excessive PD (4 h and 6 h) could inhibit the removal abilities. PD also increased the maximum relative electron transport rate of algae, leading to an increase in the photosynthetic capacity of APs. Meanwhile, the high microbial abundance indicates that chemoheterotrophic bacteria are the main influencing factor for the removal of nitrogen and phosphorus by the APs. Moreover, the system with PD using artificial lamps was proven to be feasible for engineering applications and potentially utilized in rural domestic wastewater treatment.

Occurrence and removal of PPCPs from on-site wastewater using nitrogen removing biofilters

The presence of pharmaceuticals and personal care products (PPCPs) in the environment is primarily the result of discharge of waste, including from onsite wastewater treatment systems (OWTSs) which are employed by 25% of homes in the United States. However, the occurrence and removal of PPCPs in OWTSs is not well understood, particularly given the large diversity in PPCP compounds as well as in OWTS designs. In this study, we monitored 26 different PPCPs in 13 full-scale nitrogen removing biofilters (NRBs), an innovative/alternative type of OWTS that utilizes an overlying sand layer and an underlying woodchip/sand layer to simultaneously remove nitrogen and other wastewater-derived contaminants. The specific objectives of this study were (i) to measure the occurrence of PPCPs in septic tank effluent (STE) that served as an influent to NRBs, (ii) to quantify PPCP removal in three types of NRB configurations (n = 13), and (iii) to evaluate PPCP removal with depth and environmental conditions in NRBs. Aqueous samples were taken during 42 separate sampling events during 2016 - 2019 and analyzed by liquid chromatography tandem mass spectrometry. Analysis of the STE samples yielded detection of 23 of the 26 PPCPs, with caffeine being the most abundant and frequently detected compound at 52,000 ng/L (range: 190 - 181,000 ng/L), followed by acetaminophen and paraxanthine at 47,500 ng/L (190 - 160,000 ng/L), and 34,300 ng/L (430 - 210,000 ng/L), respectively. Cimetidine, fenofibrate, and warfarin were the only compounds not detected. The average removal of PPCPs by NRBs ranged from 58% to >99% for the various compounds. PPCP removal as a function of depth in the systems showed that 50 to >99% of the observed removal was achieved within the top oxic layer (0 - 46 cm) of the NRBs for 19 analytes. Seven of the compounds had >85% removal by the same depth. These results indicate that NRBs are effective at removing PPCPs and that a large portion of the removal is achieved within the oxic nitrifying layer of the NRBs. Overall, the removal of PPCPs in NRBs was comparable (n = 8) or better (n = 15) than that observed for conventional wastewater treatment plants.

Occurrence of retinoic acids and their metabolites in sewage and their removal efficiencies by chemically enhanced primary treatment and secondary biological treatment

Sewage treatment plants (STPs) are important in densely populated megacities like Hong Kong to control the release of harmful pollutants from households and industries into the receiving water bodies and maintain water quality for supporting various beneficial uses. This study investigated the occurrence of the teratogenic retinoic acids (RAs) and their oxidative metabolites in sewage and sludge of six selected STPs that treat about 87% of all sewage in Hong Kong annually, and compared the removal efficiencies of these compounds from sewage between two major sewage treatment processes, i.e., chemically enhanced primary treatment (CEPT) and secondary (biological) treatment. The total concentrations of the studied RAs in influent, effluent and sludge from the six selected STPs were found between 21.5 and 33.1 ng/L, 12.0-20.4 ng/L, and 4.33-7.02 ng/g dry weight, respectively. The compounds were dominated by all-trans-RA and 13-cis-RA, together accounting for 46.9-65.6%, 38.4-56.7%, and 62.8-82.8% of the total RAs in influent, effluent and sludge, respectively. The studied RAs could not be satisfactorily removed by both treatment processes with removal efficiencies ranging from 25.4% to 47.4% only, without significant difference in their removal between CEPT and secondary treatment. Based on the calculated hazard quotients of all-trans-RA equivalents (0.248-0.521), the treated effluents from all the six STPs exhibited medium ecological risks to the receiving coastal environment. Therefore, continuous monitoring of these compounds and enhancement of treatment technologies of STPs shall be considered in the future to improve the removal efficiencies of these compounds.

A review on pharmaceuticals removal from waters by single and combined biological, membrane filtration and ultrasound systems

Contaminants of emerging concern (CEC) such as pharmaceuticals commonly found in urban and industrial wastewater are a potential threat to human health and have negative environmental impact. Most wastewater treatment plants cannot efficiently remove these compounds and therefore, many pharmaceuticals end up in aquatic ecosystems, inducing problems such as toxicity and antibiotic-resistance. This review reports the extent of pharmaceutical removal by individual processes such as bioreactors, advanced oxidation processes and membrane filtration systems, all of which are not 100% efficient and can lead to the direct discharge of pharmaceuticals into water bodies. Also, the importance of understanding biotransformation of pharmaceutical compounds during biological and ultrasound treatment, and its impact on treatment efficacy will be reviewed. Different combinations of the processes above, either as an integrated configuration or in series, will be discussed in terms of their degradation efficiency and scale-up capabilities. The trace quantities of pharmaceutical compounds in wastewater and scale-up issues of ultrasound highlight the importance of membrane filtration as a concentration and volume reduction treatment step for wastewater, which could subsequently be treated by ultrasound.

Seasonal variation in oestrogenic potency and biological effects of wastewater treatment works effluents assessed using ERE-GFP transgenic zebrafish embryo-larvae

Effluents from wastewater treatment works (WwTW) exhibit both temporal and spatial variation in oestrogenicity, however few studies have attempted to quantify how this variation affects biological responses in fish. Here we used an oestrogen-responsive green fluorescent protein (ERE-GFP) transgenic zebrafish (Danio rerio) to quantify oestrogenic activity and health effects for exposure to three different WwTW effluents. Endpoints measured included survival/hatching rate, GFP induction (measured in target tissues or gfp mRNA induction in whole embryos) and vtg mRNA induction in whole embryos. Exposure to one of the study effluents (at 100%), resulted in some mortality, and exposure to all three effluents (at 50% and 100%) caused decreases in hatching rates. Higher levels of vtg mRNA corresponded with higher levels of steroidal oestrogens in the different effluents, with lowest-observed-effect concentrations (LOECs) between 31 ng/L and 39 ng/L oestradiol equivalents (EEQs). Tissue patterns of GFP expression for all three WwTWs effluents reflected the known targets for steroidal oestrogens and for some other oestrogenic chemicals likely present in those effluents (i.e. nonylphenol or bisphenolic compounds). GFP induction was similarly responsive to vtg mRNA induction (a well-established biomarker for oestrogen exposure). We thus demonstrate the ERE-GFP transgenic zebrafish as an effective model for monitoring the oestrogenic potency and health effects for exposure to complex mixtures of chemicals contained within WwTW effluents.

Mitigation of emerging pollutants and pathogens in decentralized wastewater treatment processes: A review

Emerging pollutants (such as micropollutants, microplastics) and pathogens present in wastewater are of rising concern because their release can affect the natural environment and drinking water resources. In this decade, with increasing numbers of small-scale decentralized wastewater systems globally, the status of emerging pollutant and pathogen mitigation in the decentralized wastewater treatment processes has received more attention. This state-of-the-art review aims to discuss the mitigation efficiencies and mechanisms of micropollutants, microplastics, and pathogens in single-stage and hybrid decentralized wastewater treatment processes. The reviewed results revealed that hybrid wastewater treatment facilities could display better performance compared to stand-alone facilities. This is because the multiple treatment steps could offer various microenvironments, allowing incorporating several mitigation mechanisms (such as sorption, degradation, filtration, etc.) to remove complicated emerging pollutants and pathogens. The factors (such as system operation conditions, environmental conditions, wastewater matrix) influencing the removals of emerging pollutants from wastewater in these systems have been further identified. Nevertheless, it was found that very limited research work focused on synergised or conflicted effects of operation conditions on various emerging pollutants naturally present in the wastewater. Meanwhile, effective, reliable, and rapid analysis of the emerging pollutants and pathogens in the complicated wastewater matrix is still a major challenge.

Toward more sustainable photovoltaic solar electrochemical oxidation treatments: Influence of hydraulic and electrical distribution

Powering electrochemical technologies with renewable energies is a promising way to get more sustainable environmental remediation techniques. However, the operational conditions of those processes must be optimized to undergo fast and efficient treatments. In this work, the influence of electrical and hydraulic connections in the performance of a set of two electrolyzers directly powered by photovoltaic panels was evaluated. Despite both electrolyzers were assembled using the same electrode material, they showed different performances. Results indicate that the electrolyzer with higher ohmic resistance and higher overpotential attained a greater production of oxidant species, being produced under the most efficient strategy around 4.8 and 15.1 mmol of oxidants per Ah by electrolyzer 1 and 2, respectively. Nevertheless, an excess of oxidant production because of an inefficient energy management, led to low removal efficiencies as a consequence of a waste of energy into undesirable reactions. Regarding the hydraulic distribution of wastewater between the cells, it was found to influence on the total remediation attained, being the serial connection 2.5 and 1.8 more efficient than a parallel wastewater distribution under series and parallel electrical strategies, respectively. Regarding electrical strategies, parallel connections maximize the use of power produced by the photovoltaic panels. Furthermore, this allows the system to work under lower current densities, reducing the mass transfer limitations. Considering both advantages, a hydraulic connection of the cells in series and an electrical connection in parallel was found to reach the highest specific removal of pollutant, 2.52 mg clopyralid (Wh)^-1. Conversely, the opposite strategy (parallel hydraulic connection-series electrical connection) showed the lowest remediation ratio, 0.48 mg clopyralid (Wh)^-1. These results are important to be considered in the design of electrolytic treatments of waste directly powered by photovoltaic panels, because they show the way to optimize the cells stack layout in full-scale applications, exhibiting significant impact on the sustainability of the electrochemical application.

Ethinylestradiol removal of membrane bioreactor effluent by reverse osmosis and UV/H2O2: A technical and economic assessment

Synthetic hormone 17α-ethinylestradiol (EE2) is not completely removed by conventional wastewater treatment plants and therefore is often detected in surface and groundwater, sludge and sediments. Due to its persistence in the environment and its estrogenic potential, a high removal of EE2 from wastewaters before its disposal has become a concern from an environmental point of view, particularly when considering urban reuse applications. This work investigated the application of advanced processes to treat synthetic municipal wastewater containing EE2 after treatment in a membrane bioreactor (MBR). Two advanced processes were assessed: the first is advanced oxidation process (AOP), using hydrogen peroxide (H₂O₂) and ultraviolet (UV) light (route MBR-AOP) and the second, reverse osmosis (RO), in this case using UV/H₂O₂ to treat the retentate from RO (route MBR-RO). EE2 concentration in final effluent was one order of magnitude lower in route MBR-AOP than in route MBR-RO. Implications for disposal or water reuse were discussed considering the importance of other water quality parameters as well. Economic estimates for CAPEX, OPEX and total cost were made. The introduction of the oxidative step (UV/H₂O₂) after MBR caused an increase in the total cost of US$ 0.39/m³. In turn, route MBR-RO increased the total process cost by US$ 0.86/m³, showing that reduction of volume to be treated by UV/H₂O₂ in this route did not offset the cost associated with the acquisition and operation of RO. The total cost was estimated at US$ 2.47/m³ for MBR-AOP and US$ 2.94/m³ for MBR-RO for a design flow of 10 m³/h.

Distribution and degradation trend of micropollutants in a surface flow treatment wetland revealed by 3D numerical modelling combined with LC-MS/MS

Conventional wastewater treatment plants are not designed to treat micropollutants; thus, for 20 years, several complementary treatment systems, such as surface flow wetlands have been used to address this issue. Previous studies demonstrate that higher residence time and low global velocities promote nutrient removal rates or micropollutant photodegradation. Nevertheless, these studies were restricted to the system limits (inlet/outlet). Therefore, detailed knowledge of water flow is crucial for identifying areas that promote degradation and optimise surface flow wetlands. The present study combines 3D water flow numerical modelling and liquid chromatography coupled with high-resolution mass spectrometry (LC-HRMS/MS). Using this numerical model, validated by tracer experimental data, several velocity areas were distinguished in the wetland. Four areas were selected to investigate the waterflow influence and led to the following results: on the one hand, the number and concentration of micropollutants are independent of the waterflow, which could be due to several assumptions, such as the chronic exposure associated with a low Reynolds number; on the other hand, the potential degradation products (metabolites) were also assessed in the sludge to investigate the micropollutant biodegradation processes occurring in the wetland; micropollutant metabolites or degradation products were detected in higher proportions (both number and concentration) in lower flow rate areas. The relation to higher levels of plant and microorganism metabolites suggests higher biological activity that promotes degradation.

The organic loading rate affects organic micropollutants' cometabolic biotransformation kinetics under heterotrophic conditions in activated sludge

Several studies have shown that organic micropollutants (OMPs) are biotransformed cometabolically in activated sludge systems. However, the individual role of heterotrophs in the microbial consortium is still not clear, i.e., there is still a gap regarding the influence of the heterotrophic activity on the cometabolic biotransformation kinetics and yield of the OMPs. Aiming to answer these questions, experiments with increasing primary substrate concentrations were performed under aerobic heterotrophic conditions in a continuous stirred tank reactor operated at several organic loading rates (OLR) with fixed hydraulic retention time. Moreover, the individual kinetic parameters were determined in batch assays with different initial substrate concentrations using the sludges from the continuous reactor. A set of 15 OMPs displaying a variety of physicochemical properties were spiked to the feeding in the ng L^-1 - µg L^-1 range. Results reveal that the biodegradation of the primary carbon source and the biotransformation of the OMPs occur simultaneously, in clear evidence of cometabolic behavior. Moreover, we conclude that the OMPs biotransformation kinetic constant (k_biol) shows a linear dependence with the OLR of the primary substrate for most of the compounds studied, suggesting that the heterotrophic activity seriously affects the OMPs biotransformation kinetics. However, under typical activated sludge systems operating conditions (hydraulic retention times above 8 h), their biotransformation yield would not be significantly affected.

Quantification, removal and potential ecological risk of emerging contaminants in different organic loads of swine wastewater treated by integrated biological reactors

This study aims to evaluate the dynamics and their ecological risks for aquatic species of lipid regulator, nervous stimulant, anti-inflammatory and endocrine disrupters in an upflow anaerobic sludge blanket (UASB), submerged aerated biological filters (SABF) and horizontal subsurface flow constructed wetland (HSSF-CW) reactors that treat swine wastewater. Four organic loads of swine wastewater (SW) were used according to changing the chemical oxygen demand. 13 contaminants were quantified, standing out the endocrine disruptors, lipid regulator and anti-inflammatory. In phase III, 8318.4 ng L^-1 of 4-ocylphenol was found at the influent of the UASB reactor and removal from 1877.1 to 13.7 ng L^-1 in the bisphenol A system. With the maximum organic load, there was a reduction among all the treatment units, with concentrations between 1877.1 and 13.7 ng L^-1 of bisphenol A and had naproxen removal of 94.5% and 2,7 ng L^-1 after treating phases II and III. It was found that 24.6% of the contaminants presented a high ecological risk, with maximum values of 27.4 (4-nonylphenol, phase II), 24.6 and 5.9 (17β-estradiol, phase IV and I, respectively), 13.4 (4-ocylphenol, phase III) and 4.4 (estrone, phase IV) in the influent system. The reduction of ecological risk potentials was optimized by SABF and HSSF-CW. The effect oxygen availability and microbiological activities optimized the reduction of ecological risks on zebrafish (Danio rerio) and cnidarian (Hydra attenuata) species, moreover, the reduction of mass flows and ecological risks of the emerging contaminants are associated with the use of biological reactors in series and organic stabilizations.

Benchmarking Soft Sensors for Remote Monitoring of On-Site Wastewater Treatment Plants

On-site wastewater treatment plants (OSTs) are usually unattended, so failures often remain undetected and lead to prolonged periods of reduced performance. To stabilize the performance of unattended plants, soft sensors could expose faults and failures to the operator. In a previous study, we developed soft sensors and showed that soft sensors with data from unmaintained physical sensors can be as accurate as soft sensors with data from maintained ones. The monitored variables were pH and dissolved oxygen (DO), and soft sensors were used to predict nitrification performance. In the present study, we use synthetic data and monitor three plants to test these soft sensors. We find that a long solids retention time and a moderate aeration rate improve the pH soft-sensor accuracy and that the aeration regime is the main operational parameter affecting the accuracy of the DO soft sensor. We demonstrate that integrated design of monitoring and control is necessary to achieve robustness when extrapolating from one OST to another in the absence of plant-specific fine-tuning. Additionally, we provide a unique labeled dataset for further feature and data-driven soft-sensor development. Our benchmarking results indicate that it is feasible to monitor OSTs with unmaintained sensors and without plant-specific tuning of the developed soft sensors. This is expected to drastically reduce monitoring costs for OST-based sanitation systems.

Fate of typical endocrine active compounds in full-scale wastewater treatment plants: Distribution, removal efficiency and potential risks

In this study, the distribution, removal efficiency, and potential risks of 9 typical endocrine active compounds (EACs) in two full-scale wastewater treatment plants (WWTPs) were investigated. The EAC concentrations ranged from 0.2 to 7394.2 ng/L in influents. The source of influents was a critical factor in determining the EAC levels. EACs were primarily removed in the secondary biological processing units, with removal efficiencies fluctuating from 13.7% to 98%. The biological treatment processes and operating parameters (i.e., HRT and SRT) influenced the EAC removal efficiency. Bisphenol A (BPA) and estriol were mainly removed by biodegradation, while antidepressants were primarily eliminated by sludge adsorption according to the distribution patterns and mass flow of EACs in WWTPs. Novosphingobium, Saprospiraceae, etc. were the core functional bacteria for EAC biodegradation. In addition, sertraline in effluents and dewatered sludge may pose medium environmental risks, while the other EACs pose low environmental risks.

Removal of 17β-Estradiol by Activated Charcoal Supported Titanate Nanotubes (TNTs@AC) through Initial Adsorption and Subsequent Photo-Degradation: Intermediates, DFT calculation, and Mechanisms

A low-cost composite of activated charcoal supported titanate nanotubes (TNTs@AC) was developed via the facile hydrothermal method to remove the 17β-estradiol (E2, a model of pharmaceutical and personal care products) in water matrix by initial adsorption and subsequent photo-degradation. Characterizations indicated that the modification occurred, i.e., the titanate nanotubes would be grafted onto the activated charcoal (AC) surface, and the micro-carbon could modify the tubular structure of TNTs. E2 was rapidly adsorbed onto TNTs@AC, and the uptake reached 1.87 mg/g from the dual-mode model fitting. Subsequently, the adsorbed E2 could be degraded 99.8% within 2 h under ultraviolet (UV) light irradiation. TNTs@AC was attributed with a unique hybrid structure, providing the hydrophobic effect, π−π interaction, and capillary condensation for E2 adsorption, and facilitating the electron transfer and then enhancing photocatalytic ability for E2-degradation. In addition, the removal mechanism of E2 was elucidated through the density functional theory calculation. Our study is expected to provide a promising material for environmental application.

Removal of hazardous substances in municipal wastewater treatment plants

Chemical pollution poses a threat to the aquatic environment and to human health. Wastewater treatment plants are the last defensive line between the aquatic environment and emissions of pollutants. This study focuses on identification of most relevant hazardous substances in Estonian municipal wastewater and their fate in the treatment process. During this study, seasonal wastewater and sewage sludge samples were collected from nine municipal wastewater treatment plants and analyzed for 282 hazardous substances, including EU (n = 45) and Estonian (n = 31) priority substances. Results of this study show that several substances that are subject to international restrictions (e.g. Stockholm Convention) are still present in untreated sewage. Wastewater treatment systems that had a greater level of complexity (TEC >5) were more successful in removing hazardous substances. Statistical analyses showed that removal efficiency of organic hazardous substances had significant (p-value <0.05) linear correlation with removal efficiencies of chemical oxygen demand (COD) and total suspended solids (TSS), but a monotonic relationship with operators' competency. This study showed that operators' competency had a strong influence on the stability of the wastewater treatment efficiency and removal of organic hazardous substances.

Can the removal of pharmaceuticals in biofilters be influenced by short pulses of carbon?

Biofilters, similar to those already used for, e.g., removing particles from stormwater and combined sewer overflow can remove organic micropollutants from polluted waters. This study investigated the effects on removal of pharmaceuticals with pulse loadings of increased amounts of pre-settled raw wastewater to four individual biofilters containing different materials (sand, filtralite, stonewool, and sand amended with 1% peat). The effect of increasing BOD concentration to the removal rate constants could be divided into two groups; 1) compounds influenced by increasing loading of BOD: atenolol, propranolol, venlafaxine, citalopram, metoprolol, iohexol, and diclofenac 2) compounds only little or not influenced by increasing concentration of BOD: sulfamethoxazole, sulfamethizole, trimethoprim, iomeprol, and carbamazepine. Though BOD clearly had effects on the degradation, no indications towards a complete stop of the degradation were observed under any circumstances. The different biofilter materials influenced (indirectly) the removal of micropollutants: While the overall best performance was seen in the filtralite biofilter, the stonewool biofilter generally had the lowest removal rate constants. Furthermore, we observed different metabolic pathways of metoprolol in the four different biofilters under formation (and removal) of metoprolol acid, α-hydroxymetoprolol, and O-desmethylmetoprolol.

Occurrence and treatment of contaminants of emerging concern in the African aquatic environment: Literature review and a look ahead

Awareness about the rising detection and reported (eco)toxicological effects of contaminants of emerging concern (CECs, e.g. pharmaceuticals and personal care products - PPCPs - and modern pesticides) in the aquatic environment is growing. CECs are increasingly reported in the African aquatic environment, although the amount of data available is still limited. In this work, a comprehensive review is presented on the occurrence of CECs in wastewater, sludge, surface water, sediment, groundwater and drinking water of Africa. Further attention is given to the performance of wastewater stabilization ponds (WSPs) and trickling filters (TF) with respect to CECs removal. For the first time, we also look at the state of knowledge on the performance of point-of-use technologies (POUs) regarding the removal of CECs in drinking water. Generally, CECs in Africa occur at the same order of magnitude as in the Western world. However, for particular groups of compounds and at specific locations such as informal settlements, clearly higher concentrations are reported in Africa. Whereas antiretroviral and antimalarial drugs are rarely detected in the Western world, occurrence patterns in Africa reveal concentrations up to >100 μg L^-1. Removal efficiencies of WSPs and TFs focus mainly on PPCPs and vary significantly, ranging from no removal (e.g. carbamazepine) to better than 99.9% (e.g. paracetamol). Despite the rising adoption of POUs, limited but promising information is available on their performance regarding CECs treatment in drinking water, particularly for the low-cost devices (e.g. ceramic filters and solar disinfection - SODIS) being adopted in Africa and other developing countries.

Elimination of Micropollutants in Activated Sludge Reactors with a Special Focus on the Effect of Biomass Concentration

This study aimed to investigate the effects of sludge retention time (SRT), hydraulic retention time (HRT), and biomass concentration (CTSS) in activated sludge systems on removal of various micropollutants (MPs), covering a wide spectrum of biodegradability. The influence of biomass concentration on the classical pseudo-first-order rate constant was verified. Results showed that the removal rate constants were affected by both the HRT and SRT. The enhancement of the SRT increased the removal of all the MPs except for two macrolide antibiotics. Application of a higher HRT also improved MP removal, as was expected from the measured removal rate constants. More interesting, our results indicated that, logically, the increase of biomass concentration (expressed as total suspended solids CTSS) from 3 to 5 gTSS L−1 significantly enhanced the removal rate of the highly and moderately degradable compounds. Conversely, a further increase to 8 gTSS L−1 produced only an unexpected moderate effect, showing that the rate was not proportional to biomass concentration, contrary to what is generally postulated. Therefore, the use of classical kinetic models is questionable, since they do not cover the entire range of boundary conditions in activated sludge systems. This work opens new research paths and suggests potential improvements to processes.

Hazardous waste treatment technologies

This is a review of the literature published in 2018 on topics related to hazardous waste management in water, soils, sediments, and air. The review covers treatment technologies applying physical, chemical, and biological principles for contaminated water, soils, sediments, and air. PRACTITIONER POINTS: The management of waters, wastewaters, and soils contaminated by various hazardous chemicals including inorganic (e.g., oxyanions, salts, and heavy metals), organic (e.g., halogenated, pharmaceuticals and personal care products, pesticides, and persistent organic chemicals) was reviewed according to the technology applied, namely, physical, chemical and biological methods. Physical methods for the management of hazardous wastes including adsorption, coagulation (conventional and electrochemical), sand filtration, electrosorption (or CDI), electrodialysis, electrokinetics, membrane (RO, NF, MF), photocatalysis, photoelectrochemical oxidation, sonochemical, non-thermal plasma, supercritical fluid, electrochemical oxidation, and electrochemical reduction processes were reviewed. Chemical methods including ozone-based, hydrogen peroxide-based, persulfate-based, Fenton and Fenton-like, and potassium permanganate processes for the management of hazardous were reviewed. Biological methods such as aerobic, anaerobic, bioreactor, constructed wetlands, soil bioremediation and biofilter processes for the management of hazardous wastes, in mode of consortium and pure culture were reviewed.

Distributed treatment systems

This section presents a review of the scientific literature published in 2018 on topics relating to distributed treatment systems. This review is divided into the following sections: constituent removal, treatment technologies, planning and treatment management, and other topics.

Evaluation of five filter media in column experiment on the removal of selected organic micropollutants and phosphorus from household wastewater

A bench-scale column experiment was performed to study the removal of 31 selected organic micropollutants (MPs) and phosphorus by lignite, xyloid lignite (Xylit), granular activated carbon (GAC), Polonite^® and sand over a period of 12 weeks. In total 29 out of the 31 MPs showed removal efficiency >90% by GAC with an average removal of 97 ± 6%. Xylit and lignite were less efficient with an average removal of 80 ± 28% and 68 ± 29%, respectively. The removal efficiency was found to be impacted by the characterization of the sorbents and physicochemical properties of the compounds, as well as the interaction between the sorbents and compounds. For instance, Xylit and lignite performed well for relatively hydrophobic (log octanol/water partition coefficient (K_ow) ≥3) MPs, while the removal efficiency of moderately hydrophilic, highly hydrophilic and negatively charged MPs were lower. The organic sorbents were found to have more functional groups at their surfaces, which might explain the higher adsorption of MPs to these sorbents. The removal of several MPs improved after four weeks in sand, Xylit, GAC and lignite which may be related to increased biological activity and biofilm development. GAC and sand had limited ability to remove phosphorus (12 ± 27% and 14 ± 2%, respectively), while the calcium-silicate material Polonite^® precipitated phosphorus efficiently and increased the total phosphorus removal from 12% to 96% after the GAC filter.

The removal of pharmaceuticals during wastewater treatment: Can it be predicted accurately?

The presence of active pharmaceutical ingredients (APIs) in the environment is of growing concern and effluents from wastewater treatment works (WwTWs) are one of the major sources. This research combines the outputs of a multimillion pound UK program of work to evaluate the fate of APIs in the wastewater treatment process. A combination of analysis of measured data and modelling has been applied to 18 APIs, representing a wide range of medicinal application and physico-chemical characteristics. Some isomers (for atorvastatin) and metabolites (for sertraline, carbamazepine and erythromycin) were also included. High variability was observed between removal rates for individual APIs between WwTW, which after statistical analysis could not be explained by the nominal WwTW process (e.g. activated sludge or trickling filter). Nor was there a clear relationship between API removal and physico-chemical parameters such as pKa, charge or log Kow. A publically available sewage process model, SimpleTreat 4.0 which has been rigorously validated and is now being used for exposure assessment with REACH legislation for organic chemicals and within the Biocidal Products Regulation by the European Medicines Agency for APIs, was used to estimate removal rates with which to compare with measured data. SimpleTreat provided estimates of removal rates within ±30% of observed values for the majority of the APIs measured, with the use of readily available WwTW specific parameters such as flow, total suspended solids and BOD data. The data and correlations provided in this study provide support for any future considerations regarding the management of API discharge to the aquatic environment.

Retinoids and oestrogenic endocrine disrupting chemicals in saline sewage treatment plants: Removal efficiencies and ecological risks to marine organisms

Discharge of partially treated effluent from sewage treatment plants (STPs) is a significant source of chemical contaminants, such as retinoids and oestrogenic endocrine disrupting chemicals (EDCs), which are continuously input into the marine environments of densely populated and urbanized coastal cities. In this study, we successfully developed three analytical methods to detect and qualify retinoic acids (at-RA, 13c-RA & 9c-RA), their metabolites (at-4-oxo-RA, 13c-4-oxo-RA & 9c-4-oxo-RA), and oestrogenic EDCs using high pressure liquid chromatography-tandem mass spectrometry (HPLC-MS/MS). Using these methods, we found that the total concentrations of retinoids in the influents and effluents of three saline STPs in Hong Kong were 7.1-29 ng/L and 3.7-9.1 ng/L, respectively, and those of EDCs were 3107-5829 ng/L and 1225-2638 ng/L, respectively. Retinoids were dominated by at-4-oxo-RA or 13c-4-oxo-RA in wastewater, whereas at-RA and 13c-RA were the most abundant in sludge. Alkylphenols and bisphenol A were the dominant EDCs in wastewater, whilst alkylphenols, triclosan, and triclocarban were dominant in sludge. Overall, the sewage treatment processes in the STPs of Hong Kong were not highly efficient in the removal of retinoids and EDCs from wastewater influents, with removal efficiencies in the aqueous phase of 41-82% and 31-79%, respectively. The removals were attributed mainly to sorption and degradation. Due to such limited removal, the effluents from STPs and the adjacent seawaters (i.e., receiving water bodies) still exhibited relatively high concentrations of retinoids (2.0-4.3 ng/L in seawaters) and EDCs (71-260 ng/L in seawaters), which posed medium ecological risks to the coastal marine ecosystem of Hong Kong (i.e., hazard quotients: 0.1-1).

Impact of on-site wastewater infiltration systems on organic contaminants in groundwater and recipient waters

On-site sewage treatment facilities, particularly septic systems combined with soil infiltration, can be an important source of emerging organic contaminants in groundwater and surface water and thus represent a significant source of environmental and human exposure. Two infiltration systems in Åre municipality, Sweden, were examined to assess the occurrence of contaminants in groundwater and their fate and transport during infiltration. Groundwater samples, recipient surface water samples, and wastewater samples from septic tanks were collected from 2016 to 2017 covering all climatological seasons. These samples were analysed for a total of 103 contaminants, including pharmaceuticals, personal care products, organic phosphorus flame-retardants, plasticisers, perfluoroalkyl substances, and food additives. Fourteen of 103 contaminants showed 100% detection frequency in groundwater at concentrations in the low ng L^-1 to low μg L^-1 range. Of the compounds analysed, tris(2‑butoxyethyl) phosphate, sucralose, caffeine, and benzophenone showed high abundancy with maximum concentrations in the μg L^-1 range. The data were normalised for dilution using chloride and sucralose as commonly applied tracers; however, the level of sucralose decreased significantly during infiltration and it is thus suboptimal as a sewage water tracer. Large differences between the two infiltration sites were observed in detection frequencies and concentrations in groundwater, which could be attributed to the system design and the contaminant's migration time from release to sampling point. Seasonal variation was observed for selected chemicals, and the more hydrophobic chemicals showed a higher tendency for attenuation, indicating sorption as a major retention mechanism. A moderate environmental risk to aquatic organisms was estimated in adjacent surface water for galaxolide, tris(1‑chloro‑2‑propyl) phosphate, and tris(2‑butoxyethyl) phosphate. Due to this site-dependency and potential environmental risks, further studies are needed on infiltration systems in different settings and on alternative treatment techniques to reduce the contaminant discharge from on-site sewage treatment facilities.

Characterizing the removal routes of seven pharmaceuticals in the activated sludge process

The removal routes of pharmaceuticals especially biodegradation routes in the activated sludge process are still unclear. Some studies indicated pharmaceuticals were mainly removed via nitrification process (autotrophic biodegradation), while others suggested pharmaceuticals were mainly removed via COD degradation process (heterotrophic biodegradation). These unclear problems limited the improvements of pharmaceuticals removal. In this study, in order to elucidate three biodegradation routes (nitrification, COD degradation, or both nitrification and COD degradation), autotrophic and heterotrophic reactors were individually developed to separate nitrification and COD degradation form the activated sludge process (mix-trophic process including nitrification and COD degradation). Furthermore, the pharmaceuticals removal routes of adsorption, hydrolysis, and oxidation were also studied. Among six degradable pharmaceuticals, heterotrophic biodegradation and adsorption were the major removal routes. Two sulfonamides of five antibiotics were predominantly removed by COD degradation process, while nitrification and adsorption had no contributions. Adsorption, hydrolysis, nitrification, and COD degradation were the main elimination routes of cefalexin. COD degradation and adsorption were the dominant removal routes of norfloxacin. Tetracycline was mainly removed by the adsorption route, and hydrolysis and oxidation also played a role. For two drugs, ibuprofen was removed mainly via nitrification and COD degradation, and no adsorption occurred. Diclofenac could not be removed at all and was persistent in the aerobic conditions. Kinetic studies showed that biodegradation of the two sulfonamides, cefalexin, norfloxacin, and ibuprofen followed first-order kinetics rather than zero-order or second-order kinetics.

Performance and kinetic model of degradation on treating pharmaceutical solvent wastewater at psychrophilic condition by a pilot-scale anaerobic membrane bioreactor

A pilot-scale anaerobic membrane bioreactor (AnMBR) was operated for 435 days in this study, aiming to treat pharmaceutical solvent wastewater containing m-Cresol (MC), isopropanol (IPA) and N,N-Dimethylformamide (DMF) pollutants at different temperatures of 35 ± 3 °C, 25 ± 3 °C, 15 ± 3 °C and 25 ± 3 °C, respectively. The reactor reached average total removal efficiencies of about 96%, 97.2% and 98% of MC, IPA and DMF at psychrophilic condition (15 ± 3 °C). Higher physical removal rate was obtained at 15 ± 3 °C due to the important contribution of membrane filtration. At this stage, the biogas production, methane content and specific methanogenic activity and extracellular polymeric substances of suspended sludge were observed with the lowest level. Moreover, the kinetic models for solvent degradation were established at different temperatures, results showed the smaller maximum specific substrate degradation rate of MC and IPA, besides, the lowest degradation rate of three solvents were obtained at 15 ± 3 °C.

Occurrence and ecotoxicological assessment of pharmaceuticals: Is there a risk for the Mediterranean aquatic environment?

Due to their pseudo-persistence and their biological activity, pharmaceuticals are emerging contaminants of major concern for the environment. The aim of this review is to provide an updated inventory of the contamination of aquatic environments by 43 drugs representing different classes of pharmaceuticals, such as antibiotics, anti-inflammatory drugs, anti-depressants, sex hormones, lipid regulators and beta-blockers. The data collected is focused on contamination levels reported in marine coastal waters and in waste and river waters flowing into the Mediterranean Sea. The most widely produced/prescribed classes of medicines are compared with the substances most widely searched for in the environment. Ranges of pollution levels according to the type of water body are also presented, to examine the fate in sewage treatment plants and the persistence in the environment of the targeted molecules. Levels of pharmaceuticals ranged from 100 to 10,000 or even 100,000 ng·L^-1 in sewage waters, dropping to 1 to 10,000 ng·L^-1 in rivers and to not detected to 3000 ng·L^-1 in sea water. However, this paper evidences a lack of data for seawater and also for several countries along the southern coast of the Mediterranean Sea. In order to assess the risk for aquatic ecosystems associated with pharmaceuticals, experimental ecotoxicological values obtained using normalized acute and/or chronic bioassays carried out with different trophic levels were collected for each drug. Targeted biological species and associated bioassays are classified on the basis of their sensitivity to each class of compounds. Occurrence and ecotoxicology are then linked by using the Hazard Quotient (HQ) to assess the environmental risk caused by pharmaceuticals in the Mediterranean Basin. Correlations between HQ and frequency of detection of pharmaceuticals highlighted thirteen compounds that are cause for concern in Mediterranean fresh and sea waters, such as 17α-ethinylestradiol, metoprolol, 8 antibiotics and 3 analgesics/anti-inflammatories.

Occurrence, fate and removal of pharmaceuticals, personal care products and pesticides in wastewater stabilization ponds and receiving rivers in the Nzoia Basin, Kenya

Although there is increased global environmental concern about emerging organic micropollutants (EOMPs) such as pharmaceuticals, personal care products (PPCPs) and polar pesticides, limited information is available on their occurrence in Africa. This study presents unique data on concentrations and loads of 31 PPCPs and 10 pesticides in four wastewater stabilization ponds (WSPs) and receiving rivers (flowing through urban centres) in Kenya. The WSPs indicate a high potential to remove pharmaceutically active compounds (PhACs) with removals by up to >4 orders of magnitude (>99.99% removal), mainly occurring at the facultative stage. However, there are large differences in removal among the different classes, and a shift in the relative PhACs occurrence is observed during wastewater treatment. Whereas the influent is dominated by high-consumption PhACs like anti-inflammatory drugs (e.g. paracetamol and ibuprofen, up to 1000 μg L^-1), the most recalcitrant PhACs including mainly antibiotics (e.g. sulfadoxin and sulfamethoxazole) and antiretrovirals (e.g. lamivudine and nevirapine) are largely abundant (up to 100 μg L^-1) in treated effluent. Overall, concentrations of EOMPs in the Nzoia Basin rivers are the highest in dry season (except pesticides) and in small tributaries. They are of the same order of magnitude as those measured in the western world, but clearly lower than what we recently measured in the Ngong River, Nairobi region. Based on the specific consumption patterns and recalcitrant behavior, high concentrations (>1000 ng L^-1) are observed in the rivers for PPCPs like lamivudine, zidovudine, sulfamethoxazole and methylparaben. Concentration levels of pesticides are in general one order of magnitude lower (<250 ng L^-1). Our data suggest a continuous input of EOMPs to the rivers from both point (WSPs) and diffuse (urban centres) sources. To better understand and manage the impact of both sources, EOMP removal mechanisms in WSPs and their attenuation in rivers merit further research.

Simultaneous removal of atrazine and organic matter from wastewater using anaerobic moving bed biofilm reactor: A performance analysis

In this study, an anaerobic moving bed biofilm reactor (AMBBR) was designed to biodegrade atrazine under mesophilic (32 °C) condition and then it was evaluated for approximately 1 year. After biofilm formation, acclimation, and enrichment of microbial population within the bioreactor, the effect of various operation conditions such as changes in the concentration of influent atrazine and sucrose, hydraulic retention time (HRT), and salinity on the removal of atrazine and chemical oxygen demand (COD) were studied. In optimum conditions, the maximum removal efficiency of atrazine and COD was 60.5% and 97.4%, respectively. Various models were developed to predict the performance of atrazine removal as a function of HRT during continuous digestion. Also, coefficients kinetics was studied and the maximum atrazine removal rate was determined by Stover - Kincannon model (rmax = 0.223 kgATZ/m3d). Increasing salinity up to 20 g/L NaCl in influent flow could inhibit atrazine biodegradation process strongly in the AMBBR reactor; whereas, the reactor could tolerate the concentrations less than 20 g/L easily. Results showed that AMBBR is feasible, easy, affordable, so suitable process for efficiently biodegrading toxic chlorinated organic compounds such as atrazine. There was no accumulation of atrazine in the biofilm and the loss of atrazine in the control reactor was negligible; this shows that atrazine removal mechanism in this system was due to co-metabolism.