Removal of epoxiconazole and pyraclostrobin from highly contaminated effluent (grams per liter level): Comparison between ozone and solar still decontamination using real field conditions

A review toward contaminants of emerging concern in Brazil: Occurrence, impact and their degradation by advanced oxidation process in aquatic matrices

This work presents data regarding the occurrence and treatment of Contaminants of Emerging Concern (CECs) in Brazil in the past decade. The literature review (2011-2021) revealed the detection of 87 pharmaceutical drugs and personal care products, 58 pesticides, 8 hormones, 2 illicit drugs, caffeine and bisphenol A in distinct matrices (i.e.: wastewater, groundwater, sea water, rainwater, surface water, drinking water and hospital effluent). Concentrations of CECs varied from ng-μg L^-1 depending on the location, compound and matrix. The inefficiency of conventional wastewater treatment methods on the removal of CECs and lack of basic sanitation in some regions in the country aggravates contamination of Brazilian aquatic environments and poses potential environmental and health risks. Advanced oxidation processes (AOPs) are pointed out as viable and efficient alternatives to degrade CECs and prevent environmental contamination. A total of 375 studies involving the use of AOPs in Brazilian aqueous matrices were published in the last decade. Fenton and photo-Fenton processes, photo-peroxidation, ozonation, electrochemical advanced oxidation and heterogeneous photocatalysis are some of the AOPs applied by Brazilian research groups. Although many works discuss the importance of applying these technologies for CECs removal in real treatment plants, most of these studies assess the treatment of distilled water or simulated effluent. Therefore, the conduction of studies applying AOPs in real matrices are critical to drive the implementation of these processes coupled to conventional water and wastewater treatment in real plants in order to prevent the contamination of environmental matrices by CECs in Brazil.

Solar distillation meets the real world: a review of solar stills purifying real wastewater and seawater

Solar energy-driven evaporation-based freshwater production is one of the sustainable ways to purify contaminated/salty water. Recent advances in solar absorbers' assemblies, design modifications, and integrations with heating sources improved the rate of freshwater productivity. However, the type of feed water affects the evaporation rate in a solar desalination system (SDS). Many studies used tap water with added contaminants to test the performance of a SDS and studied the water quality improvement. As a typical result, pH, total dissolved solids (TDS), and electrical conductivity (µS/cm) are reduced after solar evaporation. The performance of SDSs for real wastewaters are also important to understand, e.g., the reduction of high organic pollutants after solar evaporation. In this aspect, the main objective of the present work is to review solar distillation of real wastewaters and seawater by using SDSs. Further, the mechanism of a solar distiller with heat transfer principles, parameters affecting evaporation process, real wastewaters and seawaters purified in a solar distillation system, improvement of various parameters before and after solar evaporation, pathways of handling wastewaters, challenges, and future perspectives are discussed. Conclusively, SDSs are found to remove pollutants effectively after solar evaporation. The evaporation rate is relatively slower due to high concentration of pollutants that reduce vapor pressure. The COD removal of various real wastewaters, including sludge, kitchen, textile, palm oil, petroleum, water plant, and municipal wastewaters, was 98.13%, 97.85%, 96.84%, 96.71%, 87.99%, 86.99%, and 85.67%, respectively. The reduction rate of salt concentration in real seawater after evaporation in the solar distiller was 99.99%.

Pyraclostrobin Removal in Pilot-Scale Horizontal Subsurface Flow Constructed Wetlands and in Porous Media Filters

Pyraclostrobin is a fungicide extensively used for the control of various fungal diseases and is frequently detected in environmental samples. Natural systems, such as constructed wetlands (CWs) and gravity filters, are effective and environmentally friendly treatment systems, which can reduce or eliminate pesticides from the environment. The aim of this study was to investigate the capacity of two pilot-scale CWs (porous media: cobbles and fine gravel, planted with Phragmites australis) and six gravity filters (filling material: bauxite, carbonate gravel and zeolite) to remove pyraclostrobin from polluted water originating from spraying equipment rinsing sites. For this, experiments were conducted to test the performance of the above natural systems in removing this fungicide. The results showed that the mean percent pyraclostrobin removal efficiencies for cobbles and fine gravel CW units were 56.7% and 75.2%, respectively, and the mean percent removals for HRTs of 6 and 8 days were 68.7% and 62.8%, respectively. The mean removal efficiencies for the bauxite, carbonate gravel and zeolite filter units were 32.5%, 36.7% and 61.2%, respectively, and the mean percent removals for HRTs 2, 4 and 8 days were 39.9%, 43.4% and 44.1%, respectively. Regarding the feeding strategy, the mean removal values of pyraclostrobin in gravity filter units were 43.44% and 40.80% for continuous and batch feeding, respectively. Thus, these systems can be used in rural areas for the treatment of spraying equipment rinsing water.

Hazard assessment using an in-silico toxicity assessment of the transformation products of boscalid, pyraclostrobin, fenbuconazole and glyphosate generated by exposure to an advanced oxidative process

Agricultural pesticide use is ongoing and consumer concern regarding the safety of pesticide residues on produce has generated interest in techniques that can safely reduce residues post-harvest. Recently an advanced oxidative process has shown promise in substantial residue reduction on the surface of produce. Given the potential for oxidative transformation of pesticides to generate transformation products with greater toxicity than the parent residue, take for example the oxon products of the organophosphorus insecticides, it is important to consider what transformation products are generated by pesticide exposure to an oxidative process and their potential toxicity. In this study, previously published transformation products of boscalid, pyraclostrobin, fenbuconazole and glyphosate were identified after exposure to 3% hydrogen peroxide, UV-C irradiation or their combination in an advanced oxidative process on glass, their oral toxicity, carcinogenicity and developmental toxicity were identified in-silico and an initial tier hazard assessment was conducted. Of the 87 total structures that were searched for, 53 were detected by UPLC-QTOF-MS and identified by mass spectra: 15, 13, 22 and 3 structures for boscalid, pyraclostrobin, fenbuconazole and glyphosate respectively, including the parent residues. Oral toxicity of the transformation products of pyraclostrobin and glyphosate was similar to or lower than the parent residue. Several transformation products of boscalid and fenbuconazole were estimated to be significantly more orally toxic than their parent residues. While the majority of the transformation products of boscalid, pyraclostrobin and fenbuconazole were predicted to be carcinogenic there were 11 that were consistently identified to have carcinogenic potential by several assessments. 29 of the 53 molecules were predicted to be probable developmental toxicants. An initial tier hazard assessment was conducted for Cramer rules classification and mutagenicity using the threshold of toxicological concern approach and predicted rat oral LD50. Two exposure scenarios were considered, one highly protective considering each transformation product to be at the highest maximum residue limit (MRL) for the pesticide and whole produce consumption at the highest consumption rate from the USEPA Exposures Handbook, the other considering only apple consumption with the relevant MRL. As indicated by the hazard assessment, several transformation products of boscalid, pyraclostrobin and fenbuconazole should be strongly considered for further testing, either by quantifying their production or in-vivo and in-vitro toxicity tests due to their predicted toxicity and associated hazard.

Biodegradation of the fungicide Pyraclostrobin by bacteria from orange cultivation plots

The pesticides belonging the strobilurin group are among the most common contaminants in the environment. In this work, biodegradation studies of the strobilurin fungicide Pyraclostrobin by bacteria from orange cultivation plots were performed aiming to contribute with the development of a bioremediation method. Experiments were performed in triplicate with validated methods, and optimization was performed by Central Composite Design and Response Surface Methodology. The strains were evaluated in liquid nutrient medium containing 100 mg L^-1 of Pyraclostrobin, and decreased concentrations of 61.5 to 100.5 mg L^-1 were determined after 5 days at 37 °C and 130 rpm, showing the importance of strain selection. When the five most efficient strains (Bacillus sp. CSA-13, Paenibacillus alvei CBMAI2221, Bacillus sp. CBMAI2222, Bacillus safensis CBMAI2220 and Bacillus aryabhattai CBMAI2223) were used in consortia, synergistic and antagonistic effects were observed accordingly to the employed combination of bacteria, resulting in 64.2 ± 3.9 to 95.4 ± 4.9 mg L^-1 residual Pyraclostrobin. In addition, the formation of 1-(4-chlorophenyl)-1H-pyrazol-3-ol was quantified (0.59-0.01 mg L^-1), and a new biodegradation pathway was proposed with 15 identified metabolites. Experiments were also performed in soil under controlled conditions (30 °C, 0-28 days, 100 mg kg^-1 pesticide), and the native microbiome reduced the pesticide concentration to 70.4 ± 2.3 mg L^-1, whereas the inoculation of an efficient bacterial consortium promoted clearly better results, 57.2 ± 3.9 mg L^-1 residual Pyraclostrobin. This suggests that the introduction of these strains in soil in a bioaugmentation process increases decontamination. However, the native microbiome is important for a more efficient bioremediation.

Efficiency of a low-cost pyramid-shaped solar still for pesticide removal from highly contaminated water

Water pollution by pesticides and other chemical contaminants is a subject of major importance due to the risk for human health and the environment. The search for remediation processes able to withdraw chemical contaminants from water and to allows water reuse is an urgent need. Herein, a simple and cheap system for pesticides removal was constructed and evaluated using water samples contaminated with two widely used herbicides (imazapic and imazethapyr, at g L^-1 level). Operation parameters and process efficiency, in terms of removal rate in the reclaimed water and degradation rate of pesticides in the dry residue, were quantitatively determined. The model was tested in real-world field experiments and was able to remove more than 99.95% of both contaminants from a 10 L solution containing 4.16 ± 0.94 g of imazethapyr and 1.31 ± 0.17 g of imazapic, generating reusable water with minimum volume loss (<2.5%). Liquid chromatography coupled to mass spectrometry was used to determine the herbicides content in all samples and to estimate the degree of degradation of the substances as well as the occurrence of transformation products of imazapic and imazethapyr. The system efficiency in removing contaminants of emerging concern from surface water was also evaluated. The process have generated output water with undetected levels for two fungicides present in a local river in Southern Brazil.