A potential novel approach for in situ chemical oxidation based on the combination of persulfate and dithionite

Oxidation of chromium(Ⅲ): A potential risk of using chemical oxidation processes for the remediation of 2-chlorophenol contaminated soils

Chemical oxidation processes are widely used for the remediation of organically contaminated soils, but their potential impact on variable-valence and toxic metals such as chromium (Cr) is often overlooked. In this study, we investigated the risk of Cr(Ⅲ) oxidation in soils during the remediation of 2-chlorophenol (2-CP) contaminated soils using four different processes: Potassium permanganate (KMnO4), Modified Fenton (Fe2+/H2O2), Alkali-activated persulfate (S2O82-/OH-), and Fe2+-activated persulfate (S2O82-/Fe2+). Our results indicated that the KMnO4, Fe2+/H2O2, and S2O82-/Fe2+ processes progressively oxidized Cr(III) to Cr(Ⅵ) during the 2-CP degradation. The KMnO4 process likely involved direct electron transfer, while the Fe2+/H2O2 and S2O82-/Fe2+ processes primarily relied on HO• and/or SO4•- for the Cr(III) oxidation. Notably, after 4 h of 2-CP degradation, the Cr(VI) content in the KMnO4 process surpassed China's 3.0 mg kg-1 risk screening threshold for Class I construction sites, and further exceeded the 5.7 mg kg-1 limit for Class II construction sites after 8 h. Conversely, the S2O82-/OH- process exhibited negligible oxidation of Cr(III), maintaining a low oxidation ratio of 0.13%, as highly alkaline conditions induced Cr(III) precipitation, reducing its exposure to free radicals. Cr(III) oxidation ratio was directly proportional to oxidant dosage, whereas the Fe2+/H2O2 process showed a different trend, influenced by the concentration of reductants. This study provides insights into the selection and optimization of chemical oxidation processes for soil remediation, emphasizing the imperative for thorough risk evaluation of Cr(III) oxidation before their application.

Unraveling the mechanisms behind sodium persulphate-induced changes in petroleum-contaminated aquifers' biogeochemical parameters and microbial communities

Sodium persulphate (PS) is a highly effective oxidising agent widely used in groundwater remediation and wastewater treatment. Although numerous studies have examined the impact of PS with respect to the removal efficiency of organic pollutants, the residual effects of PS exposure on the biogeochemical parameters and microbial ecosystems of contaminated aquifers are not well understood. This study investigates the effects of exposure to different concentrations of PS on the biogeochemical parameters of petroleum-contaminated aquifers using microcosm batch experiments. The results demonstrate that PS exposure increases the oxidation-reduction potential (ORP) and electrical conductivity (EC), while decreasing total organic carbon (TOC), dehydrogenase (DE), and polyphenol oxidase (PO) in the aquifer. Three-dimensional excitation-emission matrix (3D-EEM) analysis indicates PS is effective at reducing fulvic acid-like and humic acid-like substances and promoting microbial metabolic activity. In addition, PS exposure reduces the abundance of bacterial community species and the diversity index of evolutionary distance, with a more pronounced effect at high PS concentrations (31.25 mmol/L). Long-term (90 d) PS exposure results in an increase in the abundance of microorganisms with environmental resistance, organic matter degradation, and the ability to promote functional genes related to biological processes such as basal metabolism, transmission of genetic information, and cell motility of microorganisms. Structural equation modeling (SEM) further confirms that ORP and TOC are important drivers of change in the abundance of dominant phyla and functional genes. These results suggest exposure to different concentrations of PS has both direct and indirect effects on the dominant phyla and functional genes by influencing the geochemical parameters and enzymatic activity of the aquifer. This study provides a valuable reference for the application of PS in ecological engineering.

Using compound-specific isotope analysis to identify the mechanism of acetochlor degradation during oxygenation of hyporheic zone sediment

Biodegradation is recognized as the main pathway for acetochlor attenuation in aquatic environments. However, the potential abiotic degradation of acetochlor by hydroxyl radicals (•OH) generated during oxygenation of hyporheic zone sediments has not been investigated. This study aims to examine the production of •OH during oxygenation of hyporheic zone sediments and its effects on acetochlor attenuation. A significant decrease of acetochlor, ranging from 77.9% to 100%, was observed in the water-sediment systems with extensive •OH production. The primary sources of •OH production were found to be the oxidation of Fe(II) and reduced humic acids. Furthermore, a •OH quenching experiment suggests that •OH driven oxidation is the dominant pathway for acetochlor attenuation. Carbon isotope fractionation of acetochlor degradation during oxygenation of sediments (εbulk,C ranged from -1.5‰ to -0.5 ± 0.3‰) was close to that during acetochlor degradation by •OH in a H2O2-Fe3O4 Fenton system (εbulk,C = -0.5 ± 0.1‰), but significantly smaller than that during acetochlor biodegradation (εbulk,C = -5.8 ± 0.9‰). Compound-specific isotope analysis (CSIA) further suggests that •OH produced by sediment oxygenation plays a critical role in acetochlor attenuation in aquatic environments. Results of calculated apparent kinetic isotope effect of carbon (AKIEC) and transformation products indicate that SN1 and SN2-type nucleophilic substitution are the first steps in acetochlor attenuation through •OH driven oxidation (AKIEC = 1.007 ± 0.001) and aerobic biodegradation (AKIEC = 1.088 ± 0.013), respectively. Our findings highlight the potential of CSIA to assess the acetochlor degradation in water-sediment system, which can help to elucidate the fate of herbicide in aquatic environments.

Enhanced degradation of herbicides in groundwater using sulfur-containing reductants and spinel zinc ferrite activated persulfate

A challenge to successfully implementing an injection-based remedial treatment in aquifers is to ensure that the oxidative reaction is efficient and lasts long enough to contact the contaminated plume. Our objective was to determine the efficacy of zinc ferrite nanocomposites (ZnFe2O4) and sulfur-containing reductants (SCR) (i.e., dithionite; DTN and bisulfite; BS) to co-activate persulfate (S2O82-; PS) and treat herbicide-contaminated water. We also evaluated the ecotoxicity of the treated water. While both SCRs delivered excellent PS activation in a 1:0.4 ratio (PS:SCR), the reaction was relatively short-lived. By including ZnFe2O4 in the PS/BS or PS/DTN activations, herbicide degradation rates dramatically increased by factors of 2.5 to 11.3. This was due to the SO4- and OH reactive radical species that formed. Radical scavenging experiments and ZnFe2O4 XPS spectra results revealed that SO4- was the dominant reactive species that originated from S(IV)/PS activation in solution and from the Fe(II)/PS activation that occurred on the ZnFe2O4 surface. Based on liquid chromatography mass spectrometry (LC-MS), atrazine and alachlor degradation pathways are proposed that involve both dehydration and hydroxylation. In 1-D column experiments, five different treatment scenarios were run using 14C-labeled and unlabeled atrazine, and 3H2O to quantify changes in breakthrough curves. Our results confirmed that ZnFe2O4 successfully prolonged the PS oxidative treatment despite the SCR being completely dissociated. Toxicity testing showed treated 14C-atrazine was more biodegradable than the parent compound in soil microcosms. Post-treatment water (25 %, v/v) also had less impact on both Zea Mays L. and Vigna radiata L. seedling growth, but more impact on root anatomies, while ≤4 % of the treated water started to exert cytotoxicity (<80 % viability) on ELT3 cell lines. Overall, the findings confirm that ZnFe2O4/SCR/PS reaction is efficient and relatively longer lasting in treating herbicide-contaminated groundwater.

Dithionite accelerated copper slag heterogeneous-homogeneous coupled Fenton degradation of organic pollutants

The heterogeneous-homogeneous coupled Fenton (HHCF) processes combine the advantages of rapid reaction and the catalyst reuse, which makes them attractive for wastewater treatment. Nevertheless, the lack of both, cost-effective catalysts and the desirable Fe³⁺/Fe²⁺ conversion mediators limit the development of HHCF processes. This study investigates a prospective HHCF process, in which solid waste copper slag (CS) and dithionite (DNT) act as catalyst and mediator of Fe³⁺/Fe²⁺ transformation, respectively. DNT enables controlled leaching of iron and a highly efficient homogeneous Fe³⁺/Fe²⁺ cycle by dissociating to SO₂^{- •} under acidic conditions, leading to the enhanced H₂O₂ decomposition and ^•OH generation (from 48 μmol/L to 399 μmol/L) for p-chloroaniline (p-CA) degradation. The removal rate of p-CA in the CS/DNT/H₂O₂ system increased by 30 times in comparison with the CS/H₂O₂ system (increased from 1.21 × 10^-3 min^-1 to 3.61 × 10^-2 min^-1). Moreover, batch dosing of H₂O₂ can greatly promote the yield of ^•OH (from 399 μmol/L to 627 μmol/L), by mitigating the side reactions between H₂O₂ and SO₂^{- •}. This study highlights the importance of the iron cycle regulation for improvement of the Fenton efficiency and develops a cost-effective Fenton system for organic contaminants elimination in wastewater.

Recent progress on in-situ chemical oxidation for the remediation of petroleum contaminated soil and groundwater

Accidental oil leaks and spills can often result in severe soil and groundwater pollution. In situ chemical oxidation (ISCO) is a powerful and efficient remediation technology. In this review, the applications and recent advances of three commonly applied in-situ oxidants (hydrogen peroxide, persulfate, and permanganate), and the gap in remediation efficiency between lab-scale and field-scale applications is critically assessed. Feasible improvements for these measures, especially solutions for the 'rebound effect', are discussed. The removal efficiencies reported in 108 research articles related to petroleum-contaminated soil and groundwater were analyzed. The average remediation efficiency of groundwater (82.7%) by the three oxidants was higher than that of soil (65.8%). A number of factors, including non-aqueous phase liquids, adsorption effect, the aging process of contaminants, low-permeability zones, and vapor migration resulted in a decrease in the remediation efficiency and caused the residual contaminants to rebound from 19.1% of the original content to 57.7%. However, the average remediation efficiency of ISCO can be increased from 40.9% to 75.5% when combined with other techniques. In the future, improving the utilization efficiency of reactive species and enhancing the contact efficiency between oxidants and petroleum contaminants will be worthy of attention. Multi-technical combinations, such as the ISCO coupled with phase-transfer, viscosity control, controlled release or natural attenuation, can be effective methods to solve the rebound problem.

Removal of 1,2-dichloroethane in groundwater using Fenton oxidation

Among the chlorinated aliphatic hydrocarbons, 1,2-dichloroethane (1,2-DCA) is widely used for the synthesis of vinyl chloride monomers. Despite the high demand for 1,2-DCA, it poses a risk to the environment because it is persistent and carcinogenic. Therefore, in this study, several reagents (dithionite, hydrosulfide, sulfite, persulfate, sulfate radicals, and hydroxyl radicals) were evaluated for the degradation of 1,2-DCA. Among these, the hydroxyl radicals generated by the Fenton reaction were the most suitable oxidant, decomposing 92% of 1,2-DCA. Chloride, one of the final oxidized products, was observed, which supported the oxidation reaction. Moreover, with an increasing concentration of hydroxyl radicals, the degradation of 1,2-DCA increased. Furthermore, sufficient amounts of hydrogen peroxide were more important than Fe(II) in the decomposition of 1,2-DCA. The radical reaction can generate larger molecules via the degradation of 1,2-DCA, which are degraded over time. The applicability of Fenton oxidation was evaluated using real 1,2-DCA-contaminated groundwater. Although the degradation of target contaminant was lowered due to the alkaline pH and the presence of chloride and bicarbonate ions in groundwater, the Fenton reaction was still efficient to oxidize 1,2-DCA. These results indicate that Fenton oxidation is an effective technique for the treatment of 1,2-DCA in contaminated groundwater.

Phenanthrene removal from the contaminated soil using the electrokinetic-Fenton method and persulfate as an oxidizing agent

Remediation of soils contaminated with hydrocarbon materials is of particular importance due to their association with food chain. One of the remediation methods, which has been taken into account in recent years by researchers, is the electrokinetic technique. In this study, the electrokinetic method was used in combination with the Fenton technique to remove phenanthrene from clay soil. Oxidizing agent and catalyst used in the Fenton technique greatly influenced the efficiency of the remediation process. To investigate the effect of these two factors on the remediation process, it was made use of three different types of electrodes as catalyst, including graphite, iron, and copper, as well as hydrogen peroxide and sodium persulfate with different concentrations as oxidizing agent. During the 9 experiments designed, factors affecting removal efficiency, such as remediation time, electric current intensity, electroosmotic flow rate, and pH of the cathode and anode reservoirs were also investigated. Overall, the use of the electrokinetic-Fenton method with 15% hydrogen peroxide and copper electrode exhibited a 100% increase in the process efficiency over the same time period required to perform the conventional electrokinetic method and removed 93% of the soil phenanthrene, these findings indicated that combining the Fenton technique with the electrokinetic method enhanced the efficiency of this method in removing organic pollutants from the soil. Also, the use of sodium persulfate as an oxidizing agent in the electrokinetic method increased the removal efficiency by more than 95% over the half time period required to perform the conventional electrokinetic method.