Cr3+ substituted Zn-Al layered double hydroxides as UV-Vis light photocatalysts for NO gas removal from the urban environment

Europium insertion into MgAl hydrotalcite-like compound to promote the photocatalytic oxidation of nitrogen oxides

Easy synthesis of efficient, non-toxic photocatalysts is a target to expand their potential applications. In this research, the role of Eu3+ doping in the non-toxic, affordable, and easily prepared MgAl hydrotalcite-like compounds (HTlcs) was explored in order to prepare visible light semiconductors. Eu doped MgAl-HTlcs (MA-xEu) samples were prepared using a simple coprecipitation method (water, room temperature and atmospheric pressure) and europium was successfully incorporated into MgAl HTlc frameworks at various concentrations, with x (Eu3+/M3+ percentage) ranging from 2 to 15. Due to the higher ionic radius and lower polarizability of Eu3+ cation, its presence in the metal hydroxide layer induces slight structural distortions, which eventually affect the growth of the particles. The specific surface area also increases with the Eu content. Moreover, the presence of Eu3+ 4f energy levels in the electronic structure enables the absorption of visible light in the doped MA-xEu samples and contributes to efficient electron-hole separation. The microstructural and electronic changes induced by the insertion of Eu enable the preparation of visible light MgAl-based HTlcs photocatalysts for air purification purposes. Specifically, the optimal HTlc photocatalyst showed improved NOx removal efficiency, ∼ 51% (UV-Vis) and 39% (visible light irradiation, 420 nm), with excellent selectivity (> 96 %), stability (> 7 h), and enhanced release of •O2- radicals. Such results demonstrate a simple way to design photocatalytic HTlcs suitable for air purification technologies.

Mitigation approaches and techniques for combustion power plants flue gas emissions: A comprehensive review

Population growth and urbanization are driving energy demand. Despite the development of renewable energy technologies, most of this demand is still met by fossil fuels. Flue gases are the main air pollutants from combustion power plants. These pollutants include particulate matter (PM), sulfur oxides (SOx), nitrogen oxides (NOx), and carbon oxides (COx). The release of these pollutants has adverse effects on human health and the environment, including serious damage to the human respiratory system, acid rain, climate change, and global warming. In this review, a wide range of conventional and new technologies that have the potential to be used in the combustion power plant sector to manage and reduce flue gas pollutants have been examined. Nowadays, conventional approaches to emissions control and management, which focus primarily on post-combustion techniques, face several challenges despite their widespread use and commendable effectiveness. Therefore, studies that have proposed alternative approaches to achieve improved and more efficient methods are reviewed. The results show that new advances such as novel PM collectors, attaining an efficiency of nearly 100 % for submicron particles, microwave systems, boasting an efficiency of nearly 90 % for NO and over 95 % for SO2, electrochemical systems achieving above 90 % efficiency for NOx reduction, non-thermal plasma processes demonstrating an efficiency close to 90 % for NOx, microalgae-based methods with efficiency ranging from 80 % to 99 % for CO2, and wet scrubbing, exhibit considerable potential in addressing the shortcomings of conventional systems. Furthermore, the integration of hybrid methods, particularly in regions prioritizing environmental concerns over economic considerations, holds promise for enhanced control and removal of flue gas pollutants with superior efficiency.

Use of LDH- chromate adsorption co-product as an air purification photocatalyst

This work deals with the use of layered double hydroxides for a double environmental remediation. The residue obtained in the use of these materials as a chromate sorbent in water, was subsequently studied as a photocatalyst for the removal of NO_x gases. With this aim, MgAl-CO₃ layered double hydroxides were synthesized by the coprecipitation method with a divalent/trivalent metal ratio of 3. After its calcination at 500 °C, the mixed oxide was obtained and MgAl-CrO₄ were synthesized by the reconstruction method. A complete chemical, morphological and photochemical study of the samples was carried out with techniques such as XRD, FT-IR, TGA, XRF, PL, DRIFTS and UV-Vis spectroscopy. Results showed that LDH materials presented no significant changes in their structure after their use as a sorbent. Photocatalytic tests of the samples showed a very good NO removal efficiency, as well as a high selectivity (low NO₂ emissions) through complete oxidation of these oxides to nitrate. The incorporation of chromate into the LDH structure improved the absorption of light in the visible region of the spectra, producing an improvement of 20% in the NO elimination compared with the LDH without chromate.

Photodegradation of naproxen using CuZnAl-layered double hydroxides as photocatalysts

We herein report CuZnAl-layered double hydroxide that exhibits excellent photocatalytic degradation of naproxen in water.

CdIn2S4/In(OH)3/NiCr-LDH Multi-Interface Heterostructure Photocatalyst for Enhanced Photocatalytic H2 Evolution and Cr(VI) Reduction

The development of highly active and stable photocatalysts, an effective way to remediate environment pollution and alleviate energy shortages, remains a challenging issue. In this work, a CdIn2S4/In(OH)3 nanocomposite was deposited in-situ on NiCr-LDH nanosheets by a simple hydrothermal method, and the obtained CdIn2S4/In(OH)3/NiCr-LDH heterostructure photocatalysts with multiple intimate-contact interfaces exhibited better photocatalytic activity. The photocatalytic H2 evolution rate of CdIn2S4/In(OH)3/NiCr-LDH increased to 10.9 and 58.7 times that of the counterparts CdIn2S4 and NiCr-LDH, respectively. Moreover, the photocatalytic removal efficiency of Cr(VI) increased from 6% for NiCr-LDH and 75% for CdIn2S4 to 97% for CdIn2S4/In(OH)3/NiCr-LDH. The enhanced photocatalytic performance was attributed to the formation of multi-interfaces with strong interfacial interactions and staggered band alignments, which offered multiple pathways for carrier migration, thus promoting the separation efficiency of photo-excited electrons and holes. This study demonstrates a facile method to fabricate inexpensive and efficient heterostructure photocatalysts for solving environmental problems.

Insight into the role of copper in the promoted photocatalytic removal of NO using Zn2-xCuxCr-CO3 layered double hydroxide

In this work the ability of Zn_2-xCu_xCr-CO₃ layered double hydroxides (LDHs) as highly efficient DeNOx photocatalysts was studied. LDHs with x = 0, 0.2 and 0.4 were prepared using a coprecipitation method. The samples were characterized by different techniques such as XRD, XPS, FT-IR, ICP-MS, TG, SBET, SEM and Diffuse reflectance (DR). The increased amount of copper ions in the LDH layers gave rise to slight changes in the structure and morphology and an important variation of the optical properties of the LDHs. The prepared ZnCuCr-CO₃ photocatalysts exhibited favourable conversion efficiency (51%) and an extraordinary selectivity (97%) for the photochemical NO abatement. The photochemical mechanism was elucidated from DOS, EPR, Femtosecond transient absorption and in-situ DRIFTS studies. The results suggested that the presence of Cu²⁺ ions in the LDH framework introduced new states in the valence band states, thus favouring the production and mobility of e^-/h⁺ charge carriers and a greater production of ⋅O₂^- and ⋅OH.

Investigation of Structural and Luminescent Properties of Sol-Gel-Derived Cr‑Substituted Mg3Al1-xCrx Layered Double Hydroxides

In the present work, Cr-substituted Mg₃Al_1−xCr_x layered double hydroxides (LDHs) were synthesised through the phase conversion of sol-gel-derived mixed-metal oxides in an aqueous medium. The chromium substitution level in the range of 1 to 25 mol% was investigated. It was demonstrated that all synthesised specimens were single-phase LDHs. The results of elemental analysis confirmed that the suggested synthetic sol-gel chemistry approach is suitable for the preparation of LDHs with a highly controllable chemical composition. The surface microstructure of sol-gel-derived Mg₃Al_1−xCr_x LDHs does not depend on the chromium substitution level. The formation of plate-like agglomerated particles, which consist of hexagonally shaped nanocrystallites varying in size from approximately 200 to 300 nm, was observed. Optical properties of the synthesised Mg₃Al_1−xCr_x LDHs were investigated by means of photoluminescence. All Cr-containing powders exhibited characteristic emission in the red region of the visible spectrum. The strongest emission was observed for the sample doped with 5 mol% Cr³⁺ ions. However, the emission intensity of samples doped with 1–10 mol% Cr³⁺ ions was relatively similar. A further increase in the Cr³⁺ ion concentration to 25 mol% resulted in severe concentration quenching.

Recent advances in layered double hydroxides (LDHs) derived catalysts for selective catalytic reduction of NOx with NH3

In recent years, layered double hydroxides (LDHs) derived metal oxides as highly efficient catalysts for selective catalytic reduction of NO_x with NH₃ (NH₃-SCR) have attracted great attention. The high dispersibility and interchangeability of cations within the brucite-like layers make LDHs an indispensable branch of catalytic materials. With the increasingly stringent and ultra-low emission regulations, there is an urgent need for highly efficient and stable low-medium temperature denitration catalysts in markets. In this contribution, we have critically summarized the recent research progress in the LDHs derived NH₃-SCR catalysts, including their ability for NO_x removal, N₂ selectivity, active temperature window, stability and resistance to poisoning. The advantages and defects of various types of LDHs-derived catalysts are comparatively summarized, and the corresponding modification strategies are discussed. In addition, considering the importance of the catalyst's resistance to poisoning in practical applications, we discuss the poisoning mechanism of each component in flue gases, and provide the corresponding strategies to improve the poisoning resistance of catalysts. Finally, from the perspective of practical applications and operation cost, the regeneration measures of catalysts after poisoning is also discussed. We hope that this work can give timely technical guidance and valuable insights for the applications of LDHs materials in the field of NO_x control.