Temperature dependence of source profiles for volatile organic compounds from typical volatile emission sources

Origins of formaldehyde in a mountainous background atmosphere of southern China

Formaldehyde (HCHO) is one of the key indicators of severe photochemical pollution and strong atmospheric oxidation capacity in southern China. However, current information on the origins of regional HCHO and the impacts of polluted air masses remains scarce and unclear. In this study, an intensive observation of HCHO was conducted at a mountainous background site in southern China during typical photochemical pollution episodes. The concentrations of HCHO reached up to 6.14 ppbv and averaged at 2.68 ± 1.11 ppbv. Source appointment using a photochemical age-based parameterization method revealed significant contributions of secondary formation (50 %) and biomass burning (42 %). Meanwhile, under the influence of the East Asian Winter Monsoon, polluted air masses from central and western China can significantly increase the regional HCHO levels. The simulation results adopting the Rapid Adaptive Optimization Model for Atmospheric Chemistry model further demonstrated that the intrusion of active anthropogenic pollutants (e.g., small-molecule alkenes) can accelerate the net production rate of HCHO, particularly through BVOC-oxidation pathways. This study suggests a potential enhanced mechanism of HCHO production resulting from anthropogenic-biogenic interactions. It highlights that polluted air masses carrying abundant HCHO from upwind areas may facilitate severe photochemical pollution in the Greater Bay Area.

A prediction index of the volatile organic compounds pollution conditions in a chemical industrial park based on atmospheric stability

Volatile organic compounds (VOCs), as common precursors of ozone (O3) and fine particulate matter (PM2.5), are a focus of air pollution prevention and control. Furthermore, with the rapid development of industry, industrial sources have become the largest source of anthropogenic VOCs emissions, leading to economic development while causing great harm to the environment. It is becoming meaningful to efficiently predict the future total volatile organic compounds (TVOC) pollution conditions in chemical industrial parks (CIPs), which can assist managers in carrying out corporate emission management in advance. In this study, TVOC monitoring data and meteorological data from January 1, 2022, to December 31, 2022, were used to innovatively construct the TVOC pollution index. This index comprehensively considers the atmospheric stability and localized horizontal diffusion conditions and can quickly and accurately predict the variations in the TVOC in a CIP in the next 7 days. In addition, we used synoptic weather patterns and backward trajectory analysis to explore the mechanism of VOCs pollution formation in a CIP. The results show that the combined influences of a westerly wind pattern, temperatures above 30 °C, a subtropical high pressure system, more upwind pollutants, and the horizontal and vertical diffusion conditions in the CIP were unfavorable, leading to VOCs pollution.

Temperature-Dependent Evaporative Anthropogenic VOC Emissions Significantly Exacerbate Regional Ozone Pollution

The evaporative emissions of anthropogenic volatile organic compounds (AVOCs) are sensitive to ambient temperature. This sensitivity forms an air pollution-meteorology connection that has not been assessed on a regional scale. We parametrized the temperature dependence of evaporative AVOC fluxes in a regional air quality model and evaluated the impacts on surface ozone in the Beijing-Tianjin-Hebei (BTH) area of China during the summer of 2017. The temperature dependency of AVOC emissions drove an enhanced simulated ozone-temperature sensitivity of 1.0 to 1.8 μg m-3 K-1, comparable to the simulated ozone-temperature sensitivity driven by the temperature dependency of biogenic VOC emissions (1.7 to 2.4 μg m-3 K-1). Ozone enhancements driven by temperature-induced AVOC increases were localized to their point of emission and were relatively more important in urban areas than in rural regions. The inclusion of the temperature-dependent AVOC emissions in our model improved the simulated ozone-temperature sensitivities on days of ozone exceedance. Our results demonstrated the importance of temperature-dependent AVOC emissions on surface ozone pollution and its heretofore unrepresented role in air pollution-meteorology interactions.

Species profile of volatile organic compounds emission and health risk assessment from typical indoor events in daycare centers

Daycare centers (DCCs) play an instrumental role in early childhood development, making them a significant indoor environment for a large number of children globally. Amidst routine DCC activities, young children are exposed to a myriad of volatile organic compounds (VOCs), potentially impacting their health. Therefore, this study aims to investigate the VOC emissions during typical DCCs activities and evaluate respective health risk assessments. Employing a full-scale experimental setup within a well-controlled climate chamber, research was conducted into VOC emissions during three typical DCC events: arts-and-crafts (painting, gluing, modeling), cleaning, and sleeping activities tied to mattresses. The research identified 96 distinct VOCs, grouped into twelve categories, from 20 different events examined. Each event exhibited a unique VOC fingerprint, pinpointing potential source tracers. Also, significant variations in VOC emissions from different events were demonstrated. For instance, under cool & dry conditions, acrylic painting recorded high total VOC concentrations of 808 μg/m3, whereas poster painting showed only 58 μg/m3. Given these disparities, the study emphasizes the critical need for carefully selecting arts-and-crafts materials and cleaning agents in DCCs to effectively reduce VOC exposure. It suggests ventilating new mattresses before use and regular mattress check-ups to mitigate VOCs exposure during naps. Importantly, it revealed that certain events resulted in VOC levels exceeding the 10-5 cancer risk thresholds for younger children. Specifically, tetrachloroethylene and styrene from used mattresses in cool & dry conditions, ethylene oxide from new mattresses in warm & humid conditions, and styrene, during sand modeling in both conditions, were the key compounds contributing to this risk. These findings highlight the critical need for age-specific health risk assessments in DCCs. This study highlights the significance of understanding the profiles of VOC emissions from indoor events in DCCs, emphasizing potential health implications and laying a solid foundation for future investigations in this field.

Sources and environmental impacts of volatile organic components in a street canyon: Implication for vehicle emission

Street canyons serve as a representative environment that directly reflects the impact of vehicular emissions. Volatile organic compounds (VOCs) sampling during an O3 pollution event and a PM2.5 pollution episode was conducted at an urban site and a street canyon in Zhengzhou, China. It has been determined that street canyons suffer from more severe particle and NOx pollution than the urban site. Additionally, O3 has been identified as a significant or emerging pollutant in street canyon environments. In terms of VOCs, the street canyon exhibits 1.4 and 1.1 times higher total VOC concentrations compared to the urban site during the O3 and PM2.5 pollution episodes, respectively. In the street canyon location, there was a slight increase in the proportion of alkanes and aromatics, while the proportions of oxygenated VOCs and halogenated hydrocarbons decreased. Source apportionment analysis reveals that street canyons were more susceptible to the accumulation of VOCs from coating solvent, liquid petroleum gas (LPG), and gasoline additives. Consequently, the environmental impacts of VOCs originating from coating solvent and LPG were more pronounced in the street canyon location compared to the urban site. The trends of NOx concentration indicate that future continuously stricter vehicle emission standards and control policies can further reduce vehicle exhaust emissions and more attention needs to be focused on the reduction of non-exhaust emissions (i.e., coating solvent) and LPG vehicles.

The underappreciated role of fugitive VOCs in ozone formation and health risk assessment emitted from seven typical industries in China

Fugitive emission from industrial sources may result in ozone formation and health risk, while the exact contribution of this source remains incompletely understood. In this study, emission characteristics, ozone formation potential (OFP) and health risk of fugitive VOCs in 7 representative industries were investigated. Chemical material industry was the dominant contributor to VOCs of fugitive emission in comparison with other industries. The OFP of VOCs from fugitive emission was in the range of 1.45 × 103-3.98 × 105 µg/m3, with a higher value than that of organized emission in seven industries except for the coking industry and the chemical material industry, suggesting that fugitive VOCs should be taken into account while developing control strategies. Acetaldehyde, m,p-xylene, n-nonane, ethylene, vinyl chloridethe and other high OFP-contributing species were the major reactive species that should be targeted. Health risk assessment investigated non-cancer and cancer risks of fugitive VOCs in 7 industries were all above safe level (HR > 1 and LCR > 1 × 10-4), posing remarkable health threats to human health. OVOCs were the main contributor to non-cancer risk, while halohydrocarbons and aromatics contributed most to cancer risks, posing remarkable health threat on human health. Our findings highlighted the contribution of fugitive VOCs on ozone formation and health risk was underestimated, indicating which should be considered in emission control strategies of industrial sources.

Elevated volatile organic compound emissions from coated thermoplastic polyester elastomer in automotive interior parts: Importance of plastic swelling

Volatile organic compounds (VOCs) in vehicle cabins pose some health concerns, especially in new cars where interior plastics contribute substantially to VOCs emissions. We investigated the reasons for enhanced VOCs emissions from surface-coated thermoplastic polyester elastomer (TPEE), an automotive interior plastic. After applying solvent-based primer and clearcoat coatings, total VOCs (TVOC) level increased by 12.1 times (2066-24,983 μg m-3). Among the 15 emitted VOCs, seven VOCs (esters and ketones) originating from the coating solutions accounted for 77.4 % of TVOC. The remaining solvents resulted from TPEE swelling during coating owing to high chemical affinity with the solvents as evidenced by a low contact angle (14.3°) and high degree swelling (68.9%). Further baking at 80C reduced VOCs levels over time, but some major compounds (methyl isobutyl ketone and butyl acetate) persisted until 6 h. Primer and clearcoat films reduced solvent volatilization by approximately 70 %, creating a blocking effect. Apart from solvents, neat TPEE contained 4.2 % of its weight as potential VOCs. Therefore, enhanced VOCs emissions stem from three factors: (1) excessive TPEE swelling caused by coating solvents and residual solvents released as VOCs, (2) restricted volatilization caused by the coating, and (3) emission of inherent VOCs from neat TPEE.

Differences in compositions and effects of VOCs from vehicle emission detected using various methods

Vehicle exhaust and oil fuel evaporation emit volatile organic compounds (VOCs). The differences in VOC compositions and their effects determined using different methods have not been addressed sufficiently. In this study, VOC samples are obtained from single gasoline and diesel vehicle exhausts using a portable emission measurement system, from a tunnel in Yichang City, and from gasoline and diesel evaporation at gas stations. A total of 107 VOCs are analysed. The calculated VOC source profiles (based on VOC source profiles of single-vehicle type and vehicle fleet composition in the tunnel) and the tested source profiles (from a tunnel test) are compared. The results show that gasoline burning can reduce alkenes from a mass fraction of 53.1% (for evaporation) to 3.6% (for burning), as well as increase the mass fraction of alkenes from 1.3% (for diesel evaporation) to 34.0% (for diesel burning). The calculated VOC source profiles differed from the tested VOC source profiles, with a coefficient of divergence of 0.6. Ethane, ethylene, n-undecane, and n-dodecane are used to distinguish VOCs in gasoline and diesel exhausts. Cis-2-butene, 2-methylpentane, m/p-xylene, o-xylene, and n-decane can be used to separate gasoline from diesel. The xylene/ethylbenzene ratios accurately reveal the photochemical age. Gasoline burning increases health risks associated with VOCs compared with gasoline evaporation. Furthermore, it modifies the main contributor to ozone formation potential. This study is expected to facilitate refined VOC source apportionment and studies pertaining to speciated emission inventories.

Development and validation of an HPLC-MS/MS method for the simultaneous analysis of volatile organic compound metabolites, hydroxylated polycyclic aromatic hydrocarbons, and 8-hydroxy-2'-deoxyguanosine in human urine

Humans are widely and concurrently exposed to volatile organic compounds (VOCs) and polycyclic aromatic hydrocarbons (PAHs). However, few studies have reported the internal co-exposure levels of these chemicals in occupational and general populations. Specifically, the associations revealed between the urinary levels of metabolites of VOCs (mVOCs), hydroxylated PAHs (OH-PAHs), and oxidative stress biomarkers for humans remain limited. In this study, a method based on solid-phase extraction (SPE) and liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS) was developed for the simultaneous analysis of 22 mVOCs, 12 OH-PAHs, and 8-hydroxy-2'-deoxyguanosine (8-OHdG) in human urine samples. The method was validated with all target analyte accuracies and precisions in the range of 76 %-120 % and 1 %-14 % at three levels of spiked urine samples, respectively. The limit of detection (LOD) and limit of quantification (LOQ) of the target analytes were 0.01-0.34 ng/mL and 0.01-7.57 ng/mL, respectively. And the method was applied to measure urinary levels of target analytes from 38 petrochemical workers in Guangzhou, South China. Except for 3-hydroxy-benzo[a]pyrene, all target analytes were detected in the urine samples. The average levels were 0.05-12.6 ng/mL for individual OH-PAHs, 0.20-73620 ng/mL for individual mVOCs, and 1.00 ng/mL for 8-OHdG. Additionally, 3-hydroxy-phenanthrene, 1-hydroxy-pyrene, 6-hydroxy-chrysene, N-acetyl-S-(trichlorovinyl)-L-cysteine, 2-methylhippuric acid, thiodiacetic acid, trans, trans-Muconic acid, and N-acetyl-S-(3,4-dihydroxybutyl)-L-cysteine had statistically significant positive effects on 8-OHdG levels, while 1-hydroxy-naphthalene, 1,2-dihydroxybenzene, and hippuric acid showed a negative effect on 8-OHdG, indicating these metabolites could lead to synergistic or antagonistic oxidative DNA damage. This study provides a robust analytical method that permits a comprehensive assessment of co-exposure to PAHs and VOCs and their potential adverse health effects.

Temporal variations of volatile organic compounds inside the cabin of a new electric vehicle under different operation modes during winter using proton transfer reaction time-of-flight mass spectrometry

Transportation is globally becoming more vehicle-dependent as public awareness towards the health risks caused by cabin-emitted volatile organic compounds (VOCs) increases. Therefore, the need for quantifying their concentration increases as well. This study measured the real-time VOCs in a new mini-truck-type electric vehicle cabin using a proton transfer reaction time-of-flight mass spectrometry under varying cabin heating conditions during winter. A total of 246 ions were detected between m/z 30 and 250, 82 of which were quantified. The total ion count in the cabin was double that of the ambient air. Morning-to-noon concentration of total VOCs increased 2.5 times in the cabin under solar exposure (164.47-405.92 µg·m^-3). Additionally, 12 VOCs that either had higher indoor-to-outdoor ratios or globally regulated chosen to investigate the effects of cabin air conditions. Heater operation immediately increased concentrations of some VOCs by 54.62%. Furthermore, blocking solar exposure from windows reduced VOC emissions during heater off and on scenarios by 35.49% and 65.42%, respectively, indicating that window coverage also provided insulation against heat loss. Finally, the fresh air reduced cabin VOCs by 62.83% due to ambient air inflow. However, cabin concentrations remained higher than those of ambient air.

Emission factors and source profiles of volatile organic compounds from typical industrial sources in Guangzhou, China

Volatile organic compounds (VOCs) are important precursors of ozone (O₃) and fine particulate matter (PM_2.5). An accurate depiction of the emission characteristics of VOCs is the key to formulating VOC control strategies. In this study, the VOC emission factors and source profiles in five industrial sectors were developed using large-scale field measurements conducted in Guangzhou, China (100 samples for the emission factors and 434 samples for the source profile measurements). The emission factors based on the actual measurement method and the material balance method were 1.6-152.4 kg of VOCs per ton of raw materials (kg/t) and 3.1-242.2 kg/t, respectively. The similarities between the emission factors obtained using these two methods were examined, which showed a coefficient of divergence (CD) of 0.34-0.72. Among the 33 subdivided VOC source profiles developed in this study, sources including light guide plate (LGP), photoresist mask, and plastic products were the first time developed in China. Due to regional diversities in terms of production technologies, materials, and products, the emission characteristics of the VOCs varied, even in the same sector, thereby demonstrating the importance of developing localized source profiles of VOCs. The ozone formation potential (OFP) of the shipbuilding and repair sector from fugitive emissions was the highest value among all the industrial sectors. Controlling the emissions of aromatics and OVOCs was critical to reducing the O₃ growth momentum in industrial sectors. In addition, 1,2-dibromoethane showed high carcinogenic risk potentials (CRPs) during most of the industrial sectors and should be prioritized for controlling.

Volatile organic compounds at a roadside site in Hong Kong: Characteristics, chemical reactivity, and health risk assessment

Volatile organic compounds (VOCs) and oxygenated VOCs (OVOCs) play important roles in atmospheric chemistry and are recognized as the major pollutants in roadside microenvironments of metropolitan Hong Kong, China. In this study, the ambient VOCs and OVOCs were intensively monitored at a roadside site in Hong Kong for one month during morning and evening rush hours. The emission characterizations, as well as ozone formation potentials (OFP) and hydroxyl radical (OH) loss rates (L_OH) were determined. Results from the campaign showed that the average concentrations of detected VOCs/OVOCs ranged from 0.21 to 9.67 ppb, and higher toluene to benzene (T/B) ratio was observed during evening sections due to the variation of fuel types in vehicle fleets and mix of additional emission sources in this site. On average, OVOCs had much higher concentrations than the targeted VOC species. Acetone, formaldehyde, and acetaldehyde were the three most abundant species, while formaldehyde showed the highest contributions to both OFP (32.20 %) and L_OH (16.80 %). Furthermore, potential health hazards with inhalation exposure to formaldehyde, acetaldehyde, propionaldehyde, methyl ethyl ketone (MEK), 1,3-butadiene, toluene, benzene, and acrylonitrile were found. These results reveal that it is imperative to implement efficient control measures to reduce vehicle emissions for both primary and secondary pollutants and to protect both roadside workers and pedestrians.

Identification of volatile organic compound emissions from anthropogenic and biogenic sources based on satellite observation of formaldehyde and glyoxal

Anthropogenic volatile organic compounds (VOCs) are serious pollutants in the atmosphere because of their toxicity and as precursors of secondary organic aerosols and ozone pollution. Although in-situ measurements provide accurate information on VOCs, their spatial coverage is limited and insufficient. In this study, we provide a global perspective for identifying anthropogenic VOC emission sources through the ratio of glyoxal to formaldehyde (RGF) based on satellite observations. We assessed typical cities and polluted areas in the mid latitudes and found that some Asian cities had higher anthropogenic VOC emissions than cities in Europe and America. For heavily polluted areas, such as the Yangtze River Delta (YRD), the areas dominated by anthropogenic VOCs accounted for 23 % of the total study areas. During the COVID-19 pandemic, a significant decline in RGF values was observed in the YRD and western United States, corresponding to a reduction in anthropogenic VOC emissions. Furthermore, developing countries appeared to have higher anthropogenic VOC emissions than developed countries. These observations could contribute to optimising industrial structures and setting stricter pollution standards to reduce anthropogenic VOCs in developing countries.

Remote Medical Scent Detection of Cancer and Infectious Diseases With Dogs and Rats: A Systematic Review

BACKGROUND

Remote medical scent detection of cancer and infectious diseases with dogs and rats has been an increasing field of research these last 20 years. If validated, the possibility of implementing such a technique in the clinic raises many hopes. This systematic review was performed to determine the evidence and performance of such methods and assess their potential relevance in the clinic.

METHODS

Pubmed and Web of Science databases were independently searched based on PRISMA standards between 01/01/2000 and 01/05/2021. We included studies aiming at detecting cancers and infectious diseases affecting humans with dogs or rats. We excluded studies using other animals, studies aiming to detect agricultural diseases, diseases affecting animals, and others such as diabetes and neurodegenerative diseases. Only original articles were included. Data about patients' selection, samples, animal characteristics, animal training, testing configurations, and performances were recorded.

RESULTS

A total of 62 studies were included. Sensitivity and specificity varied a lot among studies: While some publications report low sensitivities of 0.17 and specificities around 0.29, others achieve rates of 1 sensitivity and specificity. Only 6 studies were evaluated in a double-blind screening-like situation. In general, the risk of performance bias was high in most evaluated studies, and the quality of the evidence found was low.

CONCLUSIONS

Medical detection using animals' sense of smell lacks evidence and performances so far to be applied in the clinic. What odors the animals detect is not well understood. Further research should be conducted, focusing on patient selection, samples (choice of materials, standardization), and testing conditions. Interpolations of such results to free running detection (direct contact with humans) should be taken with extreme caution. Considering this synthesis, we discuss the challenges and highlight the excellent odor detection threshold exhibited by animals which represents a potential opportunity to develop an accessible and non-invasive method for disease detection.

Analysis of VOCs Emitted from Small Laundry Facilities: Contributions to Ozone and Secondary Aerosol Formation and Human Risk Assessment

Volatile organic compounds (VOCs) emitted to the atmosphere form ozone and secondary organic aerosols (SOA) by photochemical reactions. As they contain numerous harmful compounds such as carcinogens, it is necessary to analyze them from a health perspective. Given the petroleum-based organic solvents used during the drying process, large amounts of VOCs are emitted from small laundry facilities. In this study, a laundry facility located in a residential area was selected, while VOCs data emitted during the drying process were collected and analyzed using a thermal desorption-gas chromatography/mass spectrometer (TD-GC/MS). We compared the results of the solvent composition, human risk assessment, contribution of photochemical ozone creation potential (POCP), and secondary organic aerosol formation potential (SOAP) to evaluate the chemical species. Alkane-based compounds; the main components of petroleum organic solvents, were dominant. The differences in evaporation with respect to the boiling point were also discerned. The POCP contribution exhibited the same trend as the emission concentration ratios for nonane (41%), decane (34%), and undecane (14%). However, the SOAP contribution accounted for o-xylene (28%), decane (27%), undecane (25%), and nonane (9%), thus confirming the high contribution of o-xylene to SOA formation. The risk assessment showed that acrylonitrile, carbon tetrachloride, nitrobenzene, bromodichloromethane, and chloromethane among carcinogenic compounds, and bromomethane, chlorobenzene, o-xylene, and hexachloro-1, 3-butadiene were found to be hazardous, thereby excessing the standard value. Overall these results facilitate the selection and control of highly reactive and harmful VOCs emitted from the dry-cleaning process.

Thermally enhanced bioremediation: A review of the fundamentals and applications in soil and groundwater remediation

Thermally enhanced bioremediation (TEB), a new concept proposed in recent years, explores the combination of thermal treatment and bioremediation to address the challenges of the low efficiency and long duration of bioremediation. This study presented a comprehensive review regarding the fundamentals of TEB and its applications in soil and groundwater remediation. The temperature effects on the bioremediation of contaminants were systematically reviewed. The thermal effects on the physical, chemical and biological characteristics of soil, and the corresponding changes of contaminants bioavailability and microbial metabolic activities were summarized. Specifically, the increase in temperature within a suitable range can proliferate enzymes enrichment, extracellular polysaccharides and biosurfactants production, and further enhancing bioremediation. Furthermore, a systematic evaluation of TEB applications by utilizing traditional in situ heating technologies, as well as renewable energy (e.g., stored aquifer thermal energy and solar energy), was provided. Additionally, TEB has been applied as a biological polishing technology post thermal treatment, which can be a cost-effective method to address the contaminants rebounds in groundwater remediation. However, there are still various challenges to be addressed in TEB, and future research perspectives to further improve the basic understanding and applications of TEB for the remediation of contaminated soil and groundwater are presented.

The world-wide waste web

Countries globally trade with tons of waste materials every year, some of which are highly hazardous. This trade admits a network representation of the world-wide waste web, with countries as vertices and flows as directed weighted edges. Here we investigate the main properties of this network by tracking 108 categories of wastes interchanged in the period 2001–2019. Although, most of the hazardous waste was traded between developed nations, a disproportionate asymmetry existed in the flow from developed to developing countries. Using a dynamical model, we simulate how waste stress propagates through the network and affects the countries. We identify 28 countries with low Environmental Performance Index that are at high risk of waste congestion. Therefore, they are at threat of improper handling and disposal of hazardous waste. We find evidence of pollution by heavy metals, by volatile organic compounds and/or by persistent organic pollutants, which are used as chemical fingerprints, due to the improper handling of waste in several of these countries.

The 2001–2019 web of international waste trade is investigated, allowing the identification of countries at threat of improper handling and disposal of waste. Chemical tracers are used to identify the environmental impact of waste in these countries.

Emission characteristics and reactivity of volatile organic compounds from typical high-energy-consuming industries in North China

To effectively reduce the compound pollution of fine particulate matter (PM_2.5) and ozone (O₃), volatile organic compound (VOC) emission sources are being extensively studied. Studies on VOC emission characteristics have mainly focused on solvent-using and technological sources, while research on the combustion processes of high-energy-consuming industries remains limited. Here, we investigate the emission characteristics of 102 VOC species emitted from eight sources (sintering, pelletizing, steel smelting, a coke oven chimney, the topside of a coke oven, thermal power, and two types of cement kilns) used in four types of high-energy-consuming industries. Our results show significant differences among these sources. The average VOC mass concentrations varied from 0.14 to 7.08 mg/m³. Alkanes had the highest percentage contribution to VOCs from sintering (45.9%) and thermal power (44.6%), while aromatics had the highest percentage contribution from steel smelting (47.8%) and the topside of the coke oven (52.9%). Alkenes were abundant in the coke oven chimney (49.1%), and oxygenated VOCs accounted for 65.3% of the total VOCs from pelletizing. We also observed notable differences between the two types of cement kilns. In general, ethane, ethene, benzene, propane, acetaldehyde, and chloromethane were the dominant VOC species in all sources. The differences between the sources were due to factors such as the applied raw materials, calcination temperature, and end-of-pipe treatment. By reviewing studies from the past 20 years, we found that differences in the number of VOC species and the implementation of ultra-low emissions affect VOC emission characteristics. The coke oven chimney and cement kiln chimney-1 had the highest ozone formation potential and secondary organic aerosol potential, respectively. The VOC emissions from coking, iron and steel, thermal power, and cement industries were 1162.1, 289.9, 311.0, and 470.2 Gg, respectively. Our results highlight the need for more effective control measures to minimize VOC emissions from high-energy-consuming industries.

High ratio of Ce3+/(Ce3++Ce4+) enhanced the plasma catalytic degradation of n-undecane on CeO2/γ-Al2O3

n-Undecane (C11) is the main component of volatile organic compounds (VOCs) emitted from the printing industry, and its emission to the atmosphere should be controlled. In this study, a dielectric barrier discharge reactor coupled with CeO₂/γ-Al₂O₃ catalysts was used to degrade C11. The effect of the chemical state of CeO₂ on C11 degradation was evaluated by varying the CeO₂ loading on γ-Al₂O₃. The C11 conversion and COx selectivity were as high as 92% and 80%, respectively, under mild reaction conditions of energy density 34 J/L and 423 K to degrade 134 mg/m³ C11 in a simulated air using 10 wt%CeO₂ impregnated on γ-Al₂O₃. After analyses using in-situ plasma diffuse reflectance Fourier transform infrared spectroscopy and gas chromatography-mass spectrometry, it was found that most of C11 were degraded to CO₂, and the main by-products on catalyst surfaces were alcohols and ketones. It was concluded from X-ray photoemission spectroscopy that the good performance of the 10 wt%CeO₂/γ-Al₂O₃ catalyst was due to its high Ce³⁺/(Ce³⁺+Ce⁴⁺) ratio as well as the oxygen vacancies. The Ce³⁺/(Ce³⁺+Ce⁴⁺) ratio of CeO₂ on γ-Al₂O₃ is crucial for the degradation of C11, providing a further roadmap for the plasma catalytic oxidation of alkanes.

Multiply improved positive matrix factorization for source apportionment of volatile organic compounds during the COVID-19 shutdown in Tianjin, China

Ambient concentrations of volatile organic compounds (VOCs) vary with emission rates, meteorology, and chemistry. Conventional positive matrix factorization (PMF) loses information because of dilution variations and chemical losses. Multiply improved PMF incorporates the ventilation coefficient, and total solar radiation or oxidants to reduce the effects of dispersion and chemical loss. These methods were applied to hourly speciated VOC data from November 2019 to March 2020 including during the COVID-19 shutdown. Various comparisons were made to assess the influences of these fluctuation drivers by time of day. Dispersion normalized PMF (DN-PMF) reduced the dispersion variations. Dispersion-radiation normalized PMF (DRN-PMF) reduced the impact of chemical loss, especially at night, which was better than Dispersion-O_x normalized PMF (DON-PMF). The conditional bivariate probability function (CBPF) plots of DRN-PMF results were consist with actual source locations. The DN-PMF, DRN-PMF, and DON-PMF results were consistent between 10:00 and 15:00, suggesting dispersion was significantly more influential than photochemical reactions during these times. The DRN-PMF results indicated that the highest VOC contributors during the COVID-19 shutdown were liquefied petroleum gas (LPG) (28.8%), natural gas (25.2%), and pulverized coal boilers emissions (19.6%). Except for petrochemical-related enterprises and LPG, the contribution concentrations of all other sources decreased substantially during the COVID-19 shutdown, by 94.7%, 90.6%, and 86.8% for vehicle emissions, gasoline evaporation, and the mixed source of diesel evaporation and solvent use, respectively. Controlling the use of motor vehicles and related volatilization of diesel fuel and gasoline can be effective in controlling VOCs in the future.