Sulfur from biogas desulfurization: Fate of S during storage in manure and after application to plants

Recent advances in biological technologies for anoxic biogas desulfurization

Recovery of the energy contained in biogas will be essential in coming years to reduce greenhouse gas emissions and our current dependence on fossil fuels. The elimination of H₂S is a priority to avoid equipment corrosion, poisoning of catalytic systems and SO₂ emissions in combustion engines. This review describes the advances made in this technology using fixed biomass bioreactors (FBB) and suspended growth bioreactors (SGB) since the first studies in this field in 2008. Anoxic desulfurization has been studied mainly in biotrickling filters (BTF). Elimination capacities (EC) up to 287 gS m^-3 h^-1 have been achieved, with a removal efficiency (RE) of 99%. Both nitrate and nitrite have been successfully used as electron acceptor. SGBs can solve some operational problems present in FBBs, such as clogging or nutrient distribution issues. However, they present greater difficulties in gas-liquid mass transfer, although ECs of up to 194 gS m^-3 h^-1 have been reported in both gas-lift and stirred tank reactors. One of the major disadvantages of using anoxic biodesulfurization compared to aerobic biodesulfurization is the need to provide reagents (nitrates and/or nitrites), with the consequent increase in operating costs. A solution proposed in this respect is the use of nitrified effluents, some ammonium-rich effluents nitrified include landfill leachate and digested effluent from the anaerobic digester have been tested successfully. Among the microbial diversity found in the bioreactors, the genera Thiobacillus, Sulfurimonas and Sedimenticola play a key role in anoxic removal of H₂S. Finally, a summary of future trends in technology is provided.

The fate of tetrathionate during the development of a biofilm in biogenic sulfuric acid attack on different cementitious materials

The biodeterioration of cement-based materials in sewer environments occurs because of the production of sulfuric acid from the biochemical oxidation of H₂S by sulfur-oxidizing bacteria (SOB). In the perspective of determining the possible reaction pathways for the sulfur cycle in such conditions, hydrated cementitious binders were exposed to an accelerated laboratory test (BAC test) to reproduce a biochemical attack similar to the one occurring in the sewer networks. Tetrathionate was used as a reduced sulfur source to naturally develop sulfur-oxidizing activities on the surfaces of materials. The transformation of tetrathionate was investigated on materials made from different binders: Portland cement, calcium aluminate cement, calcium sulfoaluminate cement and alkali-activated slag. The pH and the concentration of the different sulfur species were monitored in the leached solutions during 3 months of exposure. The results showed that the formation of different polythionates was independent of the nature of the material. The main parameter controlling the phenomena was the evolution of the pH of the leached solutions. Moreover, tetrathionate disproportionation was detected with the formation of more reduced forms of sulfur compounds (pentathionate, hexathionate and elemental sulfur) along with thiosulfate and sulfate. The experimental findings allowed numerical models to be developed to estimate the amount of sulfur compounds as a function of the pH evolution. In addition, biomass samples were collected from the exposed surface and from the deteriorated layers to identify the microbial populations. No clear influence of the cementitious materials on the selected populations was detected, confirming the previous results concerning the impact of the materials on the selected reaction pathways for tetrathionate transformation.

Sulfur recycle in biogas production: Novel Higee desulfurization process using natural amino acid salts

In this work, a desulfurization method using natural amino acid salts (AAS), which can be green prepared by biological fermentation, is proposed to remove H₂S from raw biogas. Biogas purification and fertilizer production can be simultaneously achieved to close sulfur recycle. The reaction kinetic characteristics of H₂S absorption with three kinds of AAS, including potassium β-alaninate (PA), potassium sarcosinate (PS) and potassium l-prolinate (PP) are first studied. Kinetic parameters including orders of reaction, rate constants, pre-exponential factors and activation energies are given. AAS absorbent exhibits good potential for biogas desulfurization. Higee (high gravity) technology is utilized to intensify H₂S removal. The effects of operating conditions on H₂S removal efficiency are investigated and PP shows the best desulfurization performance. The phytotoxicity of AAS and amino acid salt sulfide (AASS) is assessed by the germination index of mungbean seeds. PP and its salt sulfide (PPS) show relatively low phytotoxicity and their allowable agricultural feeding concentrations are below 0.08 M and 0.04 M, respectively. The desulfurization method demonstrates a green route for biogas purification to achieve sulfur recycle.

Polyoxometalate/Cellulose Nanofibrils Aerogels for Highly Efficient Oxidative Desulfurization

Polyoxometalate (POM) presents great potential in oxidative desulfurization (ODS) reaction. However, the high dissolubility of POM in common solvents makes it difficult to recycle. Besides, the small specific surface area of POM also limits the interaction between them and the substrate. Depositing polyoxometalates onto three-dimensional (3D) network structured materials could largely expand the application of POM. Here, the surfaces of cellulose nanofibrils (CNFs) were modified with very few (3-Aminopropyl) trimethoxysilane (APTS) to endow positive charges on the surfaces of CNFs, and then phosphotungstic acid (PTA) was loaded to obtain the aerogel A-CNF/PTA as the ODS catalyst. FT-IR indicated the successful deposition of PTA onto aminosilane modified CNF surfaces. UV-VIS further suggested the stability of PTA in the aerogels. BET and SEM results suggested the increased specific surface area and the relatively uniform 3D network structure of the prepared aerogels. TGA analysis indicated that the thermal stability of the aerogel A-CNF/PTA50% was a little higher than that of the pure CNF aerogel. Most importantly, the aerogel A-CNF/PTA50% showed good catalytic performance for ODS. Catalysis results showed that the substrate conversion rate of the aerogel A-CNF/PTA50% reached 100% within 120 min at room temperature. Even after five cycles, the substrate conversion rate of the aerogel A-CNF/PTA50% still reached 91.2% during the dynamic catalytic process. This work provides a scalable and facile way to stably deposit POM onto 3D structured materials.

Hydrogen sulphide management in anaerobic digestion: A critical review on input control, process regulation, and post-treatment

Hydrogen sulphide (H₂S) in biogas is a problematic impurity that can inhibit methanogenesis and cause equipment corrosion. This review discusses technologies to remove H₂S during anaerobic digestion (AD) via: input control, process regulation, and post-treatment. Post-treatment technologies (e.g. biotrickling filters and scrubbers) are mature with >95% removal efficiency but they do not mitigate H₂S toxicity to methanogens within the AD. Input control (i.e. substrate pretreatment via chemical addition) reduces sulphur input into AD via sulphur precipitation. However, available results showed <75% of H₂S removal efficiency. Microaeration to regulate AD condition is a promising alternative for controlling H₂S formation. Microaeration, or the use of oxygen to regulate the redox potential at around -250 mV, has been demonstrated at pilot and full scale with >95% H₂S reduction, stable methane production, and low operational cost. Further adaptation of microaeration relies on a comprehensive design framework and exchange operational experience for eliminating the risk of over-aeration.

Using Waste Sulfur from Biogas Production in Combination with Nitrogen Fertilization of Maize (Zea mays L.) by Foliar Application

In Europe, mainly due to industrial desulfurization, the supply of soil sulfur (S), an essential nutrient for crops, has been declining. One of the currently promoted sources of renewable energy is biogas production, which produces S as a waste product. In order to confirm the effect of the foliar application of waste elemental S in combination with liquid urea ammonium nitrate (UAN) fertilizer, a vegetation experiment was conducted with maize as the main crop grown for biogas production. The following treatments were included in the experiment: 1. Control (no fertilization), 2. UAN, 3. UANS1 (N:S ratio, 2:1), 4. UANS2 (1:1), 5. UANS3 (1:2). The application of UAN increased the N content in the plant and significantly affected the chlorophyll content (N-tester value). Despite the lower increase in nitrogen (N) content and uptake by the plant due to the application of UANS, these combinations had a significant effect on the quantum yield of PSII. The application of UANS significantly increased the S content of the plant. The increase in the weight of plants found on the treatment fertilized with UANS can be explained by the synergistic relationship between N and S, which contributed to the increase in crop nitrogen use efficiency. This study suggests that the foliar application of waste elemental S in combination with UAN at a 1:1 ratio could be an effective way to optimize the nutritional status of maize while reducing mineral fertilizer consumption.