Long-term stability of a non-adapted aerobic granular sludge process treating fish canning wastewater associated to EPS producers in the core microbiome

Insights into the impact of feeding with polymers on aerobic granular sludge development and stability: Performance and mechanisms

In this study, the effect of feeding with polymers on aerobic granular sludge (AGS) formation and stability was comprehensively investigated during 235-day operation. Results showed that the granules developed in starch-fed reactor possessed fluffy surface with overgrowth of granule size, and 60 % flocs were produced in protein-fed reactor, identifying feeding with polymers deteriorated AGS development and stability. Moreover, substrate conversion analysis revealed that ∼ 14 % of the consumed COD was recovered as storage of poly-hydroxybutyrate in polymer-fed reactor, much lower than 63.7 % in acetate-fed reactor. Extended Derjaguin-Landau-Verwey-Overbeek theory analysis showed that feeding with polymers increased the cell-cell energy barriers to 307.8 ∼ 388.8 kT, weakening the microbial aggregation capacity in AGS system. Microbial population results found that the relative abundance of Candidatus_Competibacter in protein- and starch-fed reactor displayed 0.01 ∼ 6.1 % and 0.07 ∼ 3.7 %, much lower than 81 % in acetate-fed reactor. Assembly mechanism analysis demonstrated that feeding with polymers enhanced the stochastic selection in shaping microbial assembly.

Monitoring the stability of aerobic granular sludge under increasing fractions of slowly biodegradable substrate using quantitative image analysis

This work investigates the effects of increasing fraction of slowly biodegradable chemical oxygen demand (sbCOD) on the morphology, stability, and performance of aerobic granular sludge (AGS) used for wastewater treatment. A sequencing batch reactor (SBR) was supplied with synthetic wastewater containing acetate as readily biodegradable COD (rbCOD) and increasing concentrations of oleate as slowly biodegradable carbon source. The sbCOD fraction was gradually increased, reaching up to 50% of the total influent biodegradable COD (bCOD). Quantitative image analysis (QIA) revealed a significant shift in granule morphology and size distribution due to increasing sbCOD fractions. Larger granules (Deq >1.0 mm) become predominant due to the washout of smaller granules (Deq <1.0 mm), which evidenced deterioration in several structural parameters. In contrary, larger granules maintained stable compactness, robustness, and extent. These morphological and size distribution changes were concomitant with variations in reactor performance: total inorganic nitrogen (TIN) removal efficiency improved up to 94%, due to enhanced denitrification capacity, supported by the predominance of larger granules and increase in granules size at higher sbCOD fractions. In contrast, P-PO43- removal efficiency declined, associated with the leakage of rbCOD to the aerobic phase, filamentous growth, and deteriorated sludge settling properties. These findings highlight the complex interactions between oleate characteristics, AGS morphology, and reactor performance, emphasizing the need for optimized strategies to mitigate process instability in AGS systems treating lipid-rich wastewater, ensuring sustainable and efficient wastewater treatment in real-world applications.

New strategy for integration of anaerobic side-stream reactor with mainstream B-stage nitritation for short-cut nitrogen removal with granulation

This study reported a successful mainstream B-stage nitritation reactor with sludge granulation that incorporated a side-stream anaerobic reactor to treat municipal wastewater A-stage effluent. With influent COD/N and COD/P ratios of 2.60 and 27.1, respectively, the system achieved a stable nitrite accumulating ratio (NAR) of 95.1% via partial nitrification with sludge granulations. Kinetic assessment,16S ribosomal RNA sequencing, and functional gene marker quantification confirmed successful nitrite-oxidizing bacteria (NOB) out-selection (<0.05% relative abundance), while none of the commonly employed approaches for NOB out-selection occurred in our study. Notably, approximately 90% of the total biomass was in the biofilm in the mainstream sequencing batch reactor (SBR), with the remaining 10% of the biomass in suspension as granules under the selective wasting strategy. The substrates and oxygen gradient along the depth of the biofilm's layered structure, alongside the anaerobic conditions in the side-stream reactor, were suggested to play roles in NOB suppression and out-selection. Overall, this study provided evidence for a possible new strategy for achieving stable mainstream B-stage nitritation, which is the prerequisite for the downstream anammox process. The novelty aspect of the systems, including the incorporation of an anaerobic sire-stream reactor, absence of the employment of any previously reported nitritation strategies, and granulation formation, provided possible new feasible routes to achieve mainstream short-cut nitrogen removal for efficient wastewater treatment. PRACTITIONER POINTS: Stable partial nitrification achieved in mainstream B-stage SBR under conditions distinct from previous reports. NOB out-selection confirmed by both activities' tests and molecular analysis. Thick biofilm and anaerobic side-stream reactor likely facilitated NOB suppression. Stable sludge granulation was maintained with selective wasting strategy.

Proteomic and spectral analysis reveals the role of extracellular polymeric substances in mercury biosorption by activated sludge under high-altitude conditions

In high-altitude regions, elevated mercury (Hg) levels in wastewater treatment plants (WWTPs) influent raise concerns about treatment efficiency and environmental impact. This study investigated the Hg biosorption capacity of activated sludge under high-altitude conditions, focusing on the binding mechanisms between EPS and Hg, and variations in EPS secretion. Low pressure, oxygen, and temperature at high altitudes increase EPS secretion, enhancing Hg biosorption. EPS provides numerous binding sites for Hg, forming nonfluorescent complexes with tryptophan-like and aromatic proteins, while hydrocarbon and oxygen-containing groups limit Hg entry into microbial cells. Proteomic analysis revealed the upregulation of transporters, stress-resistance, and binding proteins, along with those involved in carbon and amino acid metabolism, which enhance microbial resilience and EPS production, leading to increased Hg biosorption. These insights reveal adaptive mechanisms that optimize pollutant removal in high-altitude environments.

Evaluation of the shear stability of aerobic granular sludge from a pilot-scale membrane bioreactor: Establishment of a quantitative method

This work established a quantitative method to access the shear stability of aerobic granular sludge (AGS) and validated its feasibility by using the mature AGS from a pilot-scale (50 tons/day) membrane bioreactor (MBR) for treating real municipal wastewater. The results showed that the changing rate (ΔS) of the peak area (S) of granule size distribution (GSD) exhibited an exponential relationship (R2≥0.76) with the shear time (y=a-b·cx), which was a suitable indicative index to reflect the shear stability of different AGS samples. The limiting granule size (LGS) was defined and proposed to characterize the equilibrium size for AGS after being sheared for a period of time, whose value in terms of Dv50 showed high correlation (R2=0.92) with the parameter a. The free Ca2+ (28.44-34.21 mg/L) in the influent specifically interacted with polysaccharides (PS) in the granule's extracellular polymeric substance (EPS) as a nucleation site, thereby inducing the formation of Ca precipitation to enhance its Young's modulus, while Ca2+ primarily interacted with PS in soluble metabolic product (SMP) during the initial granulation process. Furthermore, the Young's modulus significantly affected the parameter a related to shear stability (R2=0.99). Since the parameter a was more closely related (R2=1.00) to ΔS than that of the parameter b or c, the excellent correlation (R2=0.99) between the parameter a and the wet density further verified the feasibility of this method.

Effect of gradual increase of salt on performance and microbial community during granulation process

Salinity was considered to have effects on the characteristics, performance microbial communities of aerobic granular sludge. This study investigated granulation process with gradual increase of salt under different gradients. Two identical sequencing batch reactors were operated, while the influent of Ra and Rb was subjected to stepwise increments of NaCl concentrations (0-4 g/L and 0-10 g/L). The presence of filamentous bacteria may contribute to granules formed under lower salinity conditions, potentially leading to granules fragmentation. Excellent removal efficiency achieved in both reactors although there was a small accumulation of nitrite in Rb at later stages. The removal efficiencies of chemical oxygen demand (COD), total nitrogen (TN), and total phosphorus (TP) in Ra were 95.31%, 93.70% and 88.66%, while the corresponding removal efficiencies in Rb were 94.19%, 89.79% and 80.74%. Salinity stimulated extracellular polymeric substances (EPS) secretion and enriched EPS producing bacteria to help maintain the integrity and stability of the aerobic granules. Heterotrophic nitrifying bacteria were responsible for NH4+-N and NO2--N oxidation of salinity systems and large number of denitrifying bacteria were detected, which ensure the high removal efficiency of TN in the systems.

Deciphering the role of micro/nano-hydroxyapatite in aerobic granular sludge system: Effects on treatment performance and enhancement mechanism

Hydroxyapatite (HAP), a mineral nucleus identified within aerobic granular sludge (AGS), plays a vital role in enhancing the AGS systems. However, the microscopic mechanism underlying their roles remains largely unexplored. Herein, a systematic investigation was carried out to elucidate the impact and enhanced mechanisms associated with HAP of different sizes, i.e. micro-HAP (mHAP) and nano-HAP (nHAP), on the aerobic granulation, nutrient removal and microbial diversity of AGS. Results showed that the presence of nHAP and mHAP significantly shortened the granulation process to 15 and 20 days, respectively. This might be ascribed to the fact that the large specific surface area of nHAP aggregates was conducive to microbial adhesion, biomass accumulation and sludge granulation. Compared with mHAP, the granules with nHAP showed better settlement performance, mechanical strength and larger diameter. The X-ray diffraction (XRD) and Raman spectrometer analysis confirmed the presence of HAP within the granules, which was found to stimulate the secretion of extracellular polymeric substance, improve the compactness of granule structure and suppress the growth of filamentous bacteria, thereby contributing to a stable AGS system. The presence of HAP, especially nHAP, effectively enriched the functional microorganisms, such as nitrifying and denitrifying bacteria (e.g. Candidatus_Competibacter) and phosphorus accumulating organisms (e.g. Flavobacterium), leading to the improved nutrient removal efficiencies (COD > 96%, TN > 76%, and TP > 74%). Further analysis revealed the up-regulation of functional enzymes (e.g. nitrite oxidoreductase and polyphosphate kinase) involved in nutrient metabolism, underlying the inherent mechanisms for the excellent nutrient removal. This study deepens the understanding of granulation mechanisms from the perspective of mineral cores, and proposes an economically feasible strategy for rapid initiation and stabilization of AGS reactors.

Ultra-rapid development of 'solid' aerobic granular sludge by stable transition/filling of inoculated 'hollow' mycelial pellets in hypersaline wastewater

To overcome the long start-up period in cultivating aerobic granular sludge (AGS) under hypersaline environment, mycelial pellets (MPs) of halotolerant fungus Cladosporium tenuissimum NCSL-XY8 were inoculated to try to realize the ultra-rapid development of salt-tolerant AGS by stable transition of 'hollow' MPs into 'solid' AGS without apparent fragmentation. The granules directly met the standard of AGS after inoculating MPs (Day 0), and it basically satisfied relatively strict standards of AGS (SVI30 < 50 mL/g, D50 > 300 μm, D10 > 200 μm and SVI30/SVI5 > 0.9) under anaerobic/aerobic mode during whole cultivation processes. Microstructure of the granular cross section clarified that MPs with hollow/loose inner layer transitioned into solid/dense AGS under anaerobic/aerobic mode within 7 days, while formed skin-like floating pieces and unstable double-layer hollow granules under aerobic mode. Organics removal reached relatively stable within 13 days under anaerobic/aerobic mode, 6 days faster than aerobic mode. This study provided a strategy for ultra-rapid and stable development of AGS, which showed the shortest granulation period in various AGS-cultivation strategies.

Evaluation of aerobic granulation performance bioaugmented with the auto-aggregating bacterium Pseudomonas stutzeri strain XL-2 with heterotrophic nitrification-aerobic denitrification capacity

In this study, the possibility of an auto-aggregating bacterium Pseudomonas strain XL-2 with heterotrophic nitrification-aerobic denitrification capacity for improving granulation and nitrogen removal was evaluated. The results showed that the supplementation of strain XL-2 promoted granulation, making R1 (experimental group with strain XL-2) dominated by granules at 14 d, which was 12 days earlier than R2 (control group without strain XL-2). This was attributed to the promotion of extracellular polymeric substances (EPS) secretion, particularly proteins by adding strain XL-2, thereby improving the hydrophobicity of sludge and altering the proteins secondary structures to facilitate aggregation. Meanwhile, adding strain XL-2 improved simultaneous nitrification and denitrification efficiency of R1. Microbial community analysis indicated that strain XL-2 successfully proliferated in aerobic granule sludge and might induce the enrichment of genera such as Flavobacterium and Paracoccus that were favorable for EPS secretion and denitrification, jointly promoting granulation and enhancing nitrogen removal efficiency.

Tire materials disturb transformations of nitrogen compounds and affect the structure of biomass in aerobic granular sludge reactors

Tire materials (TMs) present a notable hazard due to their potential to release harmful chemicals and microplastics into the environment. They can infiltrate wastewater treatment plants, where their effects remain inadequately understood, raising concerns regarding their influence on treatment procedures. Thus, this study investigated the impact of TMs in wastewater (10, 25, 50 mg/L) on wastewater treatment efficiency, biomass morphology, and microbial composition in aerobic granular sludge (AGS) reactors. TM dosage negatively correlated with nitrification and denitrification efficiencies, reducing overall nitrogen removal, but did not affect the efficiency of chemical-oxygen-demand removal. The presence of TMs increased the diameter of the granules due to TM incorporation into the biomass. The most frequently leached additives from TMs were N-(1,3-dimethylbutyl)-N'-phenyl-1,4-phenylenediamine, benzothiazole (BTH), and 2-hydroxybenzothiazole. In the treated wastewater, only BTH and aniline were detected in higher concentrations, which indicates that tire additives were biodegraded by AGS. The microbial community within the AGS adapted to TMs and their chemicals, highlighting the potential for efficient degradation of tire additives by bacteria belonging to the genera Rubrivivax, Ferruginibacter, and Xanthomonas. Additionally, our research underscores AGS's ability to incorporate TMs into biomass and effectively biodegrade tire additives, offering a promising solution for addressing environmental concerns related to TMs.

Enhanced granulation of activated sludge in an airlift reactor for organic carbon removal and ammonia retention from industrial fermentation wastewater: A comparative study

Ammonia retention and recovery from high-nitrogenous wastewater are new concepts being used for nitrogen management. A microaerophilic activated sludge system was developed to convert organic nitrogen into ammonia and retain it for its recovery; however, the settleability of activated sludge remains a challenge. Therefore, this study proposed an aerobic granular sludge system as a potential solution. Two types of sequencing batch reactors-airlift and upflow reactors-were operated to investigate the feasibility of fast granule formation, the performance of organic carbon removal and ammonia retention, and the dynamics of microbial community composition. The operation fed with industrial fermentation wastewater demonstrated that the airlift reactor ensured a more rapid granule formation than the upflow reactor because of the high shear force, and it maintained a superior ammonia retention stability of approximately 85 %. Throughout the operational period, changes in hydraulic retention time (HRT), settling time, and exchange ratio altered the granular particle sizes and microbial community compositions. Rhodocyclaceae were replaced with Comamonadaceae, Methylophilaceae, Xanthomonadaceae, and Chitinophagaceae as core taxa instrumental in granulation, likely because of their extracellular polymeric substance secretion. As the granulation process progressed, a significant decrease in the relative abundances of nitrifying bacteria-Nitrospiraceae and Nitrosomonadaceae-was observed. The reduction of settling time and HRT enhanced granulation and inhibited the activity of nitrifying bacteria. The success in granulation for ammonia conversion and retention in this study accelerates the paradigm shift from ammonia removal to ammonia recovery from industrial fermentation wastewater.

The Potential of Bioaugmentation-Assisted Phytoremediation Derived Maize Biomass for the Production of Biomethane via Anaerobic Digestion

Anthropogenic behaviors are causing the severe build-up of heavy metal (HM) pollutants in the environment, particularly in soils. Amongst a diversity of remediation technologies, phytoremediation is an environmentally friendly technology that, when coupling tolerant plants to selected rhizospheric microorganisms, can greatly stimulate HM decontamination of soils. Maize (Zea mays) is a plant with the reported capacity for HM exclusion from contaminated soil but also has energetic importance. In this study, Zea mays was coupled with Rhizophagus irregularis, an arbuscular mycorrhizal fungus (AMF), and Cupriavidus sp. strain 1C2, a plant growth-promoting rhizobacteria (PGPR), as a remediation approach to remove Cd and Zn from an industrial contaminated soil (1.2 mg Cd kg-1 and 599 mg Zn kg-1) and generate plant biomass, by contrast to the conservative development of the plant in an agricultural (with no metal pollution) soil. Biomass production and metal accumulation by Z. mays were monitored, and an increase in plant yield of ca. 9% was observed after development in the contaminated soil compared to the soil without metal contamination, while the plants removed ca. 0.77% and 0.13% of the Cd and Zn initially present in the soil. The resulting biomass (roots, stems, and cobs) was used for biogas generation in several biomethane (BMP) assays to evaluate the potential end purpose of the phytoremediation-resulting biomass. It was perceptible that the HMs existent in the industrial soil did not hinder the anaerobic biodegradation of the biomass, being registered biomethane production yields of ca. 183 and 178 mL of CH4 g-1 VS of the complete plant grown in non-contaminated and contaminated soils, respectively. The generation of biomethane from HM-polluted soils' phytoremediation-derived maize biomass represents thus a promising possibility to be a counterpart to biogas production in an increasingly challenging status of renewable energy necessities.

Granular biomass technology for providing drinking water: microbial versatility and nitrate performance in response to carbon source

The aerobic granular biomass technology was optimized for treating nitrate-polluted groundwater based on the biological denitrification processes in order to provide drinking water. Reactors inoculated with granular biomass were operated at progressively lower C/N rate using acetate and methanol to encourage heterotrophic denitrification, in order to meet the recommended requirements described by European Drinking Water Framework Directive. The granulation and long-term stability of granular biomass under low C/N were successful for all stages, demonstrated compactness of granules and absence of filamentous microorganisms. The nitrate removal was similar in methanol- and acetate-fed reactors, occurring in both cases nitrate removal ratios > 80%, and fact allows the selection of one of both depending groundwater polluted case. Also, feeding reactors with 2 C/N ratio showed nitrate removal values of ≥ 95%, treating highly polluted groundwater (100 mg·L−1). The microbial diversity was higher in the methanol-fed reactor with representative phylotypes as Flavobacterium, Cytophagaceae, NS9 marine group, while species richness was higher in the acetate-fed reactor, which was mainly represented by Flavobacterium genus. Statistical analyses revealed the higher resilience of bacterial population on granules fed with acetate, showing more resistance under drop C/N ratio. Oscillating pollution in groundwater during seasonal periods should be treated using acetate as carbon source for denitrification carried out by granular biomass, while stable pollution concentrations over time allow the use of methanol as a carbon source since the greater microbial diversity allows the elimination of other contaminants present in groundwater.

Nutrients removal by Olivibacter jilunii immobilized on activated carbon for aquaculture wastewater treatment: ppk1 gene and bacterial community structure

In this study, immobilized biological activated carbon (IBAC) mediated with Olivibacter jilunii (strain PAO-9) was utilized to treat aquaculture wastewater for nutrients removal. IBAC with strain PAO-9 could load the greatest ppk1 gene copy numbers (129524.6) per gram on activated carbon at 28 °C for 2 d in 120 rpm of stirring speed and 2 d in stationary condition. Moreover, the results about the nutrients removal and microbiology community structure showed that strain PAO-9 on IBAC could alter the structure and diversity of microbial communities and then promoted to remove the total phosphorus and total nitrogen of eel aquaculture wastewater. The highest total phosphorus, chemical oxygen demand, ammonia and total nitrogen of the wastewater treated by strain PAO-9 on IBAC were 96.1 %, 98.0 %, 100.0 % and 97.4 %, respectively. In all, O. jilunii PAO-9 immobilized activated carbon was a potential and effective approach to remove the nutrients of eel aquaculture wastewater.

Effect of Seed Sludge Type on Aerobic Granulation, Pollutant Removal and Microbial Community in a Sequencing Batch Reactor Treating Real Textile Wastewater

The aerobic granulation, pollutant removal, and microbial community in real textile wastewater (TWW) treatment were compared using conventional activated sludge (CAS) and preformed aerobic granular sludge (AGS) in synthetic wastewater as seed in two reactors, reactor-1 (R1) and reactor-2 (R2), respectively. The results showed that complete granulation was achieved in R1 (sludge volume index at 5 min (SVI₅) and 30 min (SVI₃₀): 19.4 mL/g; granule size: 210 μm) within 65 days, while it only required 28 days in R2 (SVI₅ and SVI₃₀: 27.3 mL/g; granule size: 496 μm). The removal of COD, NH₄⁺-N and TN in R1 (49.8%, 98.8%, and 41.6%) and R2 (53.6%, 96.9%, and 40.8%) were comparable in 100% real TWW treatment, but stable performance was achieved much faster in R2. The real TWW had an inhibitory effect on heterotrophic bacteria activity, but it had no inhibition on ammonia-oxidizing bacteria activity. AGS with a larger particle size had a higher microbial tolerance to real TWW. Furthermore, filamentous Thiothrix in the AGS in R2 disappeared when treating real TWW, leading to the improvement of sludge settleability. Thus, seeding preformed AGS is suggested as a rapid start-up method for a robust AGS system in treating real TWW.

Biologically induced phosphate precipitation in heterotrophic nitrification processes of different microbial aggregates: Influences of nitrogen removal metabolisms and extracellular polymeric substances

Phosphorus (P) removal occurred in heterotrophic nitrification process, but its mechanism has not been fully explored. In this study, the P removal performances, pathways, and mechanisms in heterotrophic nitrification processes of different microbial aggregates (activated sludge and biofilm) were investigated. The results showed that the biofilm reactor had more efficient total nitrogen removal (98.65%) and phosphate removal (94.17%). Heterotrophic nitrification and denitrification processes generated alkalinity for biologically induced phosphate precipitation (BIPP), which contributed to 64.12%-78.81% of the overall P removal. The solid phase P content reached 48.03 mg/gSS with hydroxyapatite and calcium phosphate formation. The study clarified that biofilm was beneficial to BIPP because of the nitrogen removal metabolism and extracellular polymeric substance (EPS). Heterotrophic nitrogen removal metabolism was the driving force of BIPP, while EPS with abundant carboxyl and amide groups promoted the precipitation. The study would provide new insights into simultaneous nutrients removal and P recovery from wastewater.

Simultaneously pollutant removal and S0 recovery from composite wastewater containing Cr(VI)-S2- based on biofilm enhancement

Bioaugmentation of extracellular polymeric substances-producing bacteria was applied in pollutant removal and S⁰ recovery from composite wastewater in a mixotrophic denitrification system. In the presence of 200 mg·L^-1 S^2- and 50 mg·L^-1 Cr(VI), the removal efficiencies of chemical oxygen demand, NO₃^-, S^2- and Cr(VI) were 86.38%, 91.82%, 95.75%, and 100.00% respectively, while S⁰ recovery efficiency reached 79.17%. Increased contents of protein and polysaccharide, especially the high ratio of protein/polysaccharide verified the structural stability of biofilm was promoted by biofilm enhancement. The widespread distribution of bacteria/extracellular polymeric substance (EPS) revealed the more obvious biofilms formation in biofilm-enhanced group. High-throughput sequencing analysis showed that EPS-producing bacteria (Flavobacterium, Thauera, Thiobacillus and Simplicispira) were dominant bacteria in the biofilm-enhanced group. Moreover, by comprehensive considering of redundancy analysis, the colonization of selected bacteria improved the robustness of the reactor and treatment performance to wastewater contained toxic pollutions.

Rapid granulation of aerobic granular sludge and maintaining its stability by combining the effects of multi-ionic matrix and bio-carrier in a continuous-flow membrane bioreactor

The present investigation aimed at providing a novel approach to promote the rapid granulation and stability of aerobic granular sludge (AGS) in a continuous-flow membrane bioreactor (MBR). By operating two identical MBRs with or with no bio-carrier for 125 days, it was found that the combination of multi-ionic matrix and bio-carrier could promote the rapid formation and maintain the long-term stability of AGS. The primary AGS was first observed inside the reactor on day 14, and the mature AGS appeared soon and kept stable for more than 4 months (its average size still was about 800 μm on day 125). Suitable filling ratio of bio-carrier was beneficial to form a stable and regular circulating water flow inside, and adding divalent metal ions quickly reduced the negative charges of tiny sludge particles, which were two essential factors leading to the rapid granulation of AGS and maintaining its stability. The multi-ionic matrix not only enhanced the biological aggregation process, but also facilitated the expansion of the cultivated AGS into a new multi-habitat system of Mn-AGS, in which, complex microbial communities with rich bio-diversity robustly promoted the efficient removal of organic pollutants and nutrients.

Ecological insight into incompatibility between polymer storage and floc settling in polyhydroxyalkanoate producer selection using complex carbon sources

Polyhydroxyalkanoate (PHA) producer selection is a key step in mixed culture (MC) production. This study focused on incompatibility between PHA storage and floc settling of MCs in the selection process. In a selector using fermented waste activated sludge as substrate under varying organic loading, average maximum PHA content obtained in batch assays increased by ∼ 22 wt% and biomass concentration increased by ∼ 34% with the increasing of organic loading. However, poor floc settling occurred, causing decreased batch PHA production and costly downstream process. A flank community which can corporately use non-VFA organics existed in the selector. When organic loading increased, PHA producers had stronger negative interactions, but not cooperation with the flank community members. Thus, high PHA storage of MCs was bounded to the domination of core PHA producer. But the domination of Thauera bacteria under high organic loading indirectly induced a bloom of filamentous bacteria.

Quantitative image analysis as a robust tool to assess effluent quality from an aerobic granular sludge system treating industrial wastewater

Quantitative image analysis (QIA) is a simple and automated method for process monitoring, complementary to chemical analysis, that when coupled to mathematical modelling allows associating changes in the biomass to several operational parameters. The majority of the research regarding the use of QIA has been carried out using synthetic wastewater and applied to activated sludge systems, while there is still a lack of knowledge regarding the application of QIA in the monitoring of aerobic granular sludge (AGS) systems. In this work, chemical oxygen demand (COD), ammonium (N-NH₄⁺), nitrite (N-NO₂^-), nitrate (N-NO₃^-), salinity (Cl^-), and total suspended solids (TSS) levels present in the effluent of an AGS system treating fish canning wastewater were successfully associated to QIA data, from both suspended and granular biomass fractions by partial least squares models. The correlation between physical-chemical parameters and QIA data allowed obtaining good assessment results for COD (R² of 0.94), N-NH₄⁺ (R² of 0.98), N-NO₂^- (R² of 0.96), N-NO₃^- (R² of 0.95), Cl^- (R² of 0.98), and TSS (R² of 0.94). While the COD and N-NO₂^- assessment models were mostly correlated to the granular fraction QIA data, the suspended fraction was highly relevant for N-NH₄⁺ assessment. The N-NO₃^-, Cl^- and TSS assessment benefited from the use of both biomass fractions (suspended and granular) QIA data, indicating the importance of the balance between the suspended and granular fractions in AGS systems and its analysis. This study provides a complementary approach to assess effluent quality parameters which can improve wastewater treatment plants monitoring and control, with a more cost-effective and environmentally friendly procedure, while avoiding daily physical-chemical analysis.

Features of aerobic granular sludge formation treating fluctuating industrial saline wastewater at pilot scale

A pilot-scale sequencing batch reactor, with a working volume of 3 m³, was installed in a fish cannery to develop aerobic granular sludge treating the produced effluents. Depending on the nitrogen (N) and organic matter (COD) concentration, the effluents were named in this study as medium-low-strength (Stage I) and high-strength (Stage II) wastewater. The composition of the wastewater was found to be a crucial factor to select granule-forming organisms. With medium-low-strength wastewater as feeding, the first granules were observed after 30 days, but the extremely high COD/N ratios of the wastewater provoked the overgrowth of filamentous bacteria after 4 months of operation (Stage I). When treating high-strength wastewater, stable aggregates with good settleability appeared, but well-shaped granules were not observed since the granulation process was not completed. The system was able to remove both COD (70-95%) and N (30-90%) treating both types of effluents. Biomass growth was the main N removal pathway. The reactor was found to be robust against factory production stops and, thus, a suitable alternative to treat wastewater from industries with discontinuous operation.

Assessment of an aerobic granular sludge system in the presence of pharmaceutically active compounds by quantitative image analysis and chemometric techniques

In this study, a sequencing batch reactor (SBR) with aerobic granular sludge (AGS) was operated with synthetic wastewater containing environmental relevant concentrations of 17β-estradiol (E2), 17α-ethinylestradiol (EE2) and sulfamethoxazole (SMX). Despite the presence of the studied PhAC, the granular fraction clearly predominated (TSS_gran/TSS ranging from 0.82 to 0.98) throughout the monitoring period, presenting aggregates with high organic fraction (VSS/TSS above 0.83) and good settling characteristics (SVI₅ ranging from 15 to 39 mL/gTSS). A principal component analysis (PCA) with quantitative image analysis (QIA) based data allowed to distinguish the different operational periods, namely with mature granules (CONT), and the E2, EE2, and SMX feeding periods. It further revealed a positive relationship between the biomass density, sludge settling ability, overall and granular biomass contents, granulation properties, granular biomass fraction and large granules fraction and size. Moreover, a discriminant analysis (DA) allowed to successfully discriminate not only the different operational periods, mainly by using the floccular apparent density, granular stratification and contents data, but also the PhAC presence in samples. The filamentous bacteria contents, sludge settling properties, settling properties stability and granular stratification, structure and contents parameters were found to be crucial for that purpose.