Acetic acid bioproduction: The technological innovation change

Natural Polyhydroxyalkanoates-An Overview of Bacterial Production Methods

Polyhydroxyalkanoates (PHAs) are intracellular biopolymers that microorganisms use for energy and carbon storage. They are mechanically similar to petrochemical plastics when chemically extracted, but are completely biodegradable. While they have potential as a replacement for petrochemical plastics, their high production cost using traditional carbon sources remains a significant challenge. One potential solution is to modify heterotrophic PHA-producing strains to utilize alternative carbon sources. An alternative approach is to utilize methylotrophic or autotrophic strains. This article provides an overview of bacterial strains employed for PHA production, with a particular focus on those exhibiting the highest PHA content in dry cell mass. The strains are organized according to their carbon source utilization, encompassing autotrophy (utilizing CO2, CO) and methylotrophy (utilizing reduced single-carbon substrates) to heterotrophy (utilizing more traditional and alternative substrates).

The relationship between energy and non-energy factors and CO2 emissions in New Zealand

The use of renewable energy as a fuel source and expansion of forest areas are the best ways for reducing CO2 emissions. This study aims to examine the effects of forest plantation area, renewable energies, real gross domestic product (GDP), and technological innovation on CO2 emissions in 9 regions of New Zealand between 2006 and 2019. For this purpose, it employs a pooled mean group methodology. Investigating the regional impacts of various variables, especially the forest area, on CO2 emissions is the main contribution of this study. The results suggest that planted forest areas can reduce CO2 emissions in the long run, but its impact in the short run is not significant. Non-renewable energy consumption is the major contributor to CO2 emissions in both the short and long run. While technological innovation and renewable energy consumption appear effective in reducing carbon emissions in the short term, they still contribute to increased CO2 emissions in the long term. At the regional level, we found that the forest plantation areas in Manawatu-Whanganui and Gisborne are important regions for reducing CO2 emissions. By taking account of these results, New Zealand should take swift action to properly manage and increase the current level of forest areas and if applicable expand them. It also needs to improve the current level of use of renewable energy to achieve its abatement goals.

Role of Polysaccharides from Marine Seaweed as Feed Additives for Methane Mitigation in Ruminants: A Critical Review

Given the increasing concerns regarding greenhouse gas emissions associated with livestock production, the need to discover effective strategies to mitigate methane production in ruminants is clear. Marine algal polysaccharides have emerged as a promising research avenue because of their abundance and sustainability. Polysaccharides, such as alginate, laminaran, and fucoidan, which are extracted from marine seaweeds, have demonstrated the potential to reduce methane emissions by influencing the microbial populations in the rumen. This comprehensive review extensively examines the available literature and considers the effectiveness, challenges, and prospects of using marine seaweed polysaccharides as feed additives. The findings emphasise that marine algal polysaccharides can modulate rumen fermentation, promote the growth of beneficial microorganisms, and inhibit methanogenic archaea, ultimately leading to decreases in methane emissions. However, we must understand the long-term effects and address the obstacles to practical implementation. Further research is warranted to optimise dosage levels, evaluate potential effects on animal health, and assess economic feasibility. This critical review provides insights for researchers, policymakers, and industry stakeholders dedicated to advancing sustainable livestock production and methane mitigation.

Production of short-chain fatty acids (SCFAs) as chemicals or substrates for microbes to obtain biochemicals

Carboxylic acids have become interesting platform molecules in the last years due to their versatility to act as carbon sources for different microorganisms or as precursors for the chemical industry. Among carboxylic acids, short-chain fatty acids (SCFAs) such as acetic, propionic, butyric, valeric, and caproic acids can be biotechnologically produced in an anaerobic fermentation process from lignocellulose or other organic wastes of agricultural, industrial, or municipal origin. The biosynthesis of SCFAs is advantageous compared to chemical synthesis, since the latter relies on fossil-derived raw materials, expensive and toxic catalysts and harsh process conditions. This review article gives an overview on biosynthesis of SCFAs from complex waste products. Different applications of SCFAs are explored and how these acids can be considered as a source of bioproducts, aiming at the development of a circular economy. The use of SCFAs as platform molecules requires adequate concentration and separation processes that are also addressed in this review. Various microorganisms such as bacteria or oleaginous yeasts can efficiently use SCFA mixtures derived from anaerobic fermentation, an attribute that can be exploited in microbial electrolytic cells or to produce biopolymers such as microbial oils or polyhydroxyalkanoates. Promising technologies for the microbial conversion of SCFAs into bioproducts are outlined with recent examples, highlighting SCFAs as interesting platform molecules for the development of future bioeconomy.

Sustainable management of food waste; pre-treatment strategies, techno-economic assessment, bibliometric analysis, and potential utilizations: A systematic review

Food waste (FW) contains many nutritional components such as proteins, lipids, fats, polysaccharides, carbohydrates, and metal ions, which can be reused in some processes to produce value-added products. Furthermore, FW can be converted into biogas, biohydrogen, and biodiesel, and this type of green energy can be used as an alternative to nonrenewable fuel and reduce reliance on fossil fuel sources. It has been demonstrated in many reports that at the laboratory scale production of biochemicals using FW is as good as pure carbon sources. The goal of this paper is to review approaches used globally to promote turning FW into useable products and green energy. In this context, the present review article highlights deeply in a transdisciplinary manner the sources, types, impacts, characteristics, pre-treatment strategies, and potential management of FW into value-added products. We find that FW could be upcycled into different valuable products such as eco-friendly green fuels, organic acids, bioplastics, enzymes, fertilizers, char, and single-cell protein, after the suitable pre-treatment method. The results confirmed the technical feasibility of all the reviewed transformation processes of FW. Furthermore, life cycle and techno-economic assessment studies regarding the socio-economic, environmental, and engineering aspects of FW management are discussed. The reviewed articles showed that energy recovery from FW in various forms is economically feasible.

Schwanniomyces etchellsii, acid-thermotolerant yeasts from urban city soil

Acid-tolerant yeasts are one of the important keys to producing ethanol from acidic substrates, especially from molasses and agricultural waste. In this study, selected cultivars of yeasts isolated from a variety of locations such as botanical gardens in Thailand urban areas, which are often found highly polluted in the air such as carbon dioxide which is a cause of acid rain. There is limited information about how tolerant yeasts, are or their functional properties related to the environment. Yeast species were determined by using the 18S rDNA sequence guide. The level of acid tolerance was evaluated by adding to the culture medium lactic acid (300-900 mM), acetic acid (100-400 mM), and propionic acid (25-100 mM). 18S rDNA analysis has shown a %similarity of the nucleotide sequence higher than 98.65% compared to the database. Schwanniomyces etchellsii strains found in urban city soil were notable for their tolerance of lactic acid up to 100 mM. There are two main types of yeasts in overall acid tolerance: S. etchellsii, which is recognized as an osmotic pressure-resistant species that is highly resistant to fermentation inhibitors and produces ethanol; and Schizosaccharomyces pombe, which cell wall has been reported to be characterized by accumulation of α-(1,3)-glucan and malic acid can be used in metabolic pathways. The results show that S. pombe, isolated from rice paddy fields, can grow efficiently in acetic and propionic acid up to 400 mM and 100 mM, respectively. This species could be cultured in ethanol at a concentration of 12.5% (v/v). Moreover, it presented high ethanol and acetic acid production of 14.5-15.9 g/L and 7-10 g/L, respectively, with or without acidic conditions. In comparison, S. etchellsii, isolated from the botanical garden soil, which is grown in acetic, propionic, and lactic acid, was also indicated to be an organic acid-tolerant species.

Predicting Extraction Selectivity of Acetic Acid in Pervaporation by Machine Learning Models with Data Leakage Management

The extraction of acetic acid and other carboxylic acids from water is an emerging separation need as they are increasingly produced from waste organics and CO₂ during carbon valorization. However, the traditional experimental approach can be slow and expensive, and machine learning (ML) may provide new insights and guidance in membrane development for organic acid extraction. In this study, we collected extensive literature data and developed the first ML models for predicting separation factors between acetic acid and water in pervaporation with polymers' properties, membrane morphology, fabrication parameters, and operating conditions. Importantly, we assessed seed randomness and data leakage problems during model development, which have been overlooked in ML studies but will result in over-optimistic results and misinterpreted variable importance. With proper data leakage management, we established a robust model and achieved a root-mean-square error of 0.515 using the CatBoost regression model. In addition, the prediction model was interpreted to elucidate the variables' importance, where the mass ratio was the topmost significant variable in predicting separation factors. In addition, polymers' concentration and membranes' effective area contributed to information leakage. These results demonstrate ML models' advances in membrane design and fabrication and the importance of vigorous model validation.

Analysis of Hazelnuts (Corylus avellana L.) Stored for Extended Periods by 1H NMR Spectroscopy Monitoring Storage-Induced Changes in the Polar and Nonpolar Metabolome

Storage is a critical step in the post-harvest processing of hazelnuts, as it can lead to mold, rancidity, and off-flavor. However, there is a lack of analytical methods to detect improper or extended storage. To comprehensively investigate the effects of hazelnut storage, samples were stored under five different conditions for up to 18 months. Subsequently, the polar and nonpolar metabolome were analyzed by ¹H NMR spectroscopy and chemometric approaches for classification as well as variable selection. Increases in hexanoic, octanoic, and nonanoic acid, all products of lipid oxidation and responsible for quality defects, were found across all conditions. Furthermore, the concentration of free long-chain fatty acids increased in samples stored at high temperatures. Harsh short-term storage resulted in an increase in fumaric and lactic acid, glucose, fructose, and choline and a decrease in acetic acid.

Nipa Sap Can Be Both Carbon and Nutrient Source for Acetic Acid Production by Moorella thermoacetica (f. Clostridium thermoaceticum) and Reduced Minimal Media Supplements

Nipa sap is an excellent microbial nutrient and carbon source since it contains essential minerals and vitamins, in addition to sugars. In this study, nipa sap was successfully fermented to acetic acid by the industrially important Moorella thermoacetica without additional trace metals, without inorganics, or without yeast extract. Although microbial growth kinetics differed from one nutrient condition to another, acetic acid concentrations obtained without trace metals, without inorganics, and without yeast extract supplements were in the same range as that with full nutrient, confirming that nipa sap is a good nutrient source for M. thermoacetica. Fermentations in vials and fermenters showed comparable acetic acid production trends but acetic acid concentrations were higher in fermenters. Upon economic analysis, it was found that the most profitable nutrient condition was without yeast extract. It reduced the cost of culture medium from $1.7 to only $0.3/L, given that yeast extract costs $281/kg, while nipa sap can be available from $0.08/kg. Minimal medium instead of the traditional complex nutrient simplifies the process. This work also opens opportunities for profitable anaerobic co-digestion and co-fermentation of nipa sap with other biomass resources where nipa sap will serve as an inexpensive nutrient source and substrate.

Screening and Characterization of New Acetobacter fabarum and Acetobacter pasteurianus Strains with High Ethanol−Thermo Tolerance and the Optimization of Acetic Acid Production

The production of vinegar on an industrial scale from different raw materials is subject to constraints, notably the low tolerance of acetic acid bacteria (AAB) to high temperatures and high ethanol concentrations. In this study, we used 25 samples of different fruits from seven Moroccan biotopes with arid and semi-arid environmental conditions as a basic substrate to isolate thermo- and ethanol-tolerant AAB strains. The isolation and morphological, biochemical and metabolic characterization of these bacteria allowed us to isolate a total number of 400 strains with characters similar to AAB, of which six strains (FAGD1, FAGD10, FAGD18 and GCM2, GCM4, GCM15) were found to be mobile and immobile Gram-negative bacteria with ellipsoidal rod-shaped colonies that clustered in pairs and in isolated chains. These strains are capable of producing acetic acid from ethanol, growing on peptone and oxidizing acetate to CO2 and H2O. Strains FAGD1, FAGD10 and FAGD18 show negative growth on YPG medium containing D-glucose > 30%, while strains GCM2, GCM4 and GCM15 show positive growth. These six strains stand out on CARR indicator medium as isolates of the genus Acetobacter ssp. Analysis of 16S rDNA gene sequencing allowed us to differentiate these strains as Acetobacter fabarum and Acetobacter pasteurianus. The study of the tolerance of these six isolates towards pH showed that most of the six strains are unable to grow at pH 3 and pH 9, with an ideal pH of 5. The behavior of the six strains at different concentrations of ethanol shows an optimal production of acetic acid after incubation at concentrations between 6% and 8% (v/v) of ethanol. All six strains tolerated an ethanol concentration of 16% (v/v). The resistance of the strains to acetic acid differs between the species of AAB. The optimum acetic acid production is obtained at a concentration of 1% (v/v) for the strains of FAGD1, FAGD10 and FAGD18, and 3% (v/v) for GCM2, GCM4 and GCM15. These strains are able to tolerate an acetic acid concentration of up to 6% (v/v). The production kinetics of the six strains show the highest levels of growth and acetic acid production at 30 °C. This rate of growth and acetic acid production is high at 35 °C, 37 °C and 40 °C. Above 40 °C, the production of acid is reduced. All six strains continue to produce acetic acid, even at high temperatures up to 48 °C. These strains can be used in the vinegar production industry to minimize the load on cooling systems, especially in countries with high summer temperatures.

Removal of Acetic Acid from Bacterial Culture Media by Adsorption onto a Two-Component Composite Polymer Gel

Organic acids, including acetic acid, are the metabolic products of many microorganisms. Acetic acid is a target product useful in the fermentation process. However, acetic acid has an inhibitory effect on microorganisms and limits fermentation. Thus, it would be beneficial to recover the acid from the culture medium. However, conventional recovery processes are expensive and environmentally unfriendly. Here, we report the use of a two-component hydrogel to adsorb dissociated and undissociated acetic acid from the culture medium. The Langmuir model revealed the maximum adsorption amount to be 44.8 mg acetic acid/g of dry gel at neutral pH value. The adsorption capacity was similar to that of an ion-exchange resin. In addition, the hydrogel maintained its adsorption capability in a culture medium comprising complex components, whereas the ion-exchange did not adsorb in this medium. The adsorbed acetic acid was readily desorbed using a solution containing a high salt concentration. Thus, the recovered acetic acid can be utilized for subsequent processes, and the gel-treated fermentation broth can be reused for the next round of fermentation. Use of this hydrogel may prove to be a more sustainable downstream process to recover biosynthesized acetic acid.

Valorization of Spent Coffee Grounds as Precursors for Biopolymers and Composite Production

Spent coffee grounds (SCG) are a current subject in many works since coffee is the second most consumed beverage worldwide; however, coffee generates a high amount of waste (SCG) and can cause environmental problems if not discarded properly. Therefore, several studies on SCG valorization have been published, highlighting its waste as a valuable resource for different applications, such as biofuel, energy, biopolymer precursors, and composite production. This review provides an overview of the works using SCG as biopolymer precursors and for polymer composite production. SCG are rich in carbohydrates, lipids, proteins, and minerals. In particular, carbohydrates (polysaccharides) can be extracted and fermented to synthesize lactic acid, succinic acid, or polyhydroxyalkanoate (PHA). On the other hand, it is possible to extract the coffee oil and to synthesize PHA from lipids. Moreover, SCG have been successfully used as a filler for composite production using different polymer matrices. The results show the reasonable mechanical, thermal, and rheological properties of SCG to support their applications, from food packaging to the automotive industry.