Enhancing sulfide mitigation via the sustainable supply of oxygen from air-nanobubbles in gravity sewers

Effective role and mechanism of scrap iron filings in controlling hydrogen sulfide production in septic tanks

Long-term anaerobic conditions in septic tanks exacerbate the release of hazardous gases, such as hydrogen sulfide (H2S), which degrades urban air quality. While traditional iron salt addition effectively inhibits H2S production, its large-scale application imposes economic burdens and challenges for low-carbon emission reduction. To address this issue, this study proposes the use of scrap iron filings (SIFs) as a source of Fe2+ and Fe3+ ions and evaluates their efficacy in sulfide control through a long-term laboratory-scale septic tank reactor. Experimental results demonstrated that the addition of SIFs reduced the average concentration of dissolved sulfides by 45.6 % and gaseous H2S by 92.6 %. Microbial community analysis of septic tank sediments revealed a significant decrease in sulfate-reducing bacteria (SRB) and an increase in sulfur-oxidizing bacteria (SOB), indicating that SIFs influence microbial activity by suppressing sulfide generation while enhancing sulfide oxidation. Furthermore, the addition of SIFs slightly increased the carbon-to-nitrogen (C/N) and carbon-to-phosphorus (C/P) ratios in the effluent, potentially improving subsequent nitrogen and phosphorus removal in wastewater treatment. These findings suggest a promising strategy for reducing hydrogen sulfide emissions and corrosion in septic tanks.

Emission Characteristics of Aerosols Generated during the Micro-Nano Bubble Aeration Process in Wastewater

Micro-nano bubble (MNB) aeration is an emerging technology that considerably enhances the aeration efficiency of wastewater. This study evaluates, for the first time, aerosolization at the water-air interface during MNB aeration. Our results show that the concentration of culturable mixed microorganisms (i.e., bacteria, fungi, and intestinal bacteria) in the in situ MNB generation (MNBs-G) phase is 2170 CFU/m3, 1.38 and 1.58-fold higher than those in medium-bubble aeration (MBA; 1568 CFU/m3) and small-bubble aeration (SBA; 1376 CFU/m3) aerosols, respectively. Conversely, the concentration of culturable mixed microorganisms in the MNB persistent dissolved oxygen (MNBs-O) phase is only 914 CFU/m3. Microbiological analysis shows a lower abundance of bacterial pathogens in MNBs-G (34.12%) and MNBs-O (34.02%) phases than in MBA (39.63%) and SBA (38.87%) aerosols. Acinetobacter is prevalent in MNBs-G (14.76%) and MNBs-O (8.22%) aerosols, whereas Bacillus and Arcobacter are prevalent in MBA (23.96%) and SBA (6.92%) aerosols, respectively. The total concentrations of chemicals [i.e., total organic carbon, water-soluble ions, and metal(loid)s] in aerosols formed via MNB aeration (205.98-373.74 μg/m3) are lower than those in MBA and SBA (398.69-594.92 μg/m3). Compared to MBA and SBA, the MNBs-G phase exhibits higher emissions of 12 elements in aerosols (i.e., NO3-, NO2-, Ca2+, Na+, K+, Mg2+, Zn, Cd, Fe, Mn, As, and Cr), whereas the MNBs-O phase generally shows lower emissions. These findings highlight the potential of optimized MNB aeration technology in considerably mitigating aerosol emissions and thereby advancing environmental sustainability in wastewater treatment.

The fate of pharmaceuticals and personal care products (PPCPs) in sewer sediments:Adsorption triggering resistance gene proliferation

In recent years, large quantities of pharmaceuticals and personal care products (PPCPs) have been discharged into sewers, while the mechanisms of PPCPs enrichment in sewer sediments have rarely been revealed. In this study, three PPCPs (tetracycline, sulfamethoxazole, and triclocarban) were added consecutively over a 90-day experimental period to reveal the mechanisms of PPCPs enrichment and the transmission of resistance genes in sewer sediments. The results showed that tetracycline (TC) and triclocarban (TCC) have higher adsorption concentration in sediments compared to sulfamethoxazole (SMX). The absolute abundance of Tets and suls genes increased in sediments under PPCPs pressure. The increase in secretion of extracellular polymeric substances (EPS) and the loosening of the structure exposed a large number of hydrophobic functional groups, which promoted the adsorption of PPCPs. The absolute abundance of antibiotic resistance genes (ARGs), EPS and the content of PPCPs in sediments exhibited significant correlations. The enrichment of PPCPs in sediments was attributed to the accumulation of EPS, which led to the proliferation of ARGs. These findings contributed to further understanding of the fate of PPCPs in sewer sediments and opened a new perspective for consideration of controlling the proliferation of resistance genes.

Delineating cathodic extracellular electron transfer pathways in microbial electrosynthesis: Modulation of polarized potential and Pt@C addition

Microbial electrosynthesis (MES) is an innovative technology that employs microbes to synthesize chemicals by reducing CO2. A comprehensive understanding of cathodic extracellular electron transfer (CEET) is essential for the advancement of this technology. This study explores the impact of different cathodic potentials on CEET and its response to introduction of hydrogen evolution materials (Pt@C). Without the addition of Pt@C, H2-mediated CEET contributed up to 94.4 % at -1.05 V. With the addition of Pt@C, H2-mediated CEET contributions were 76.6 % (-1.05 V) and 19.9 % (-0.85 V), respectively. BRH-c20a was enriched as the dominated microbe (>80 %), and its relative abundance was largely affected by the addition of Pt@C NPs. This study highlights the tunability of MES performance through cathodic potential control and the addition of metal nanoparticles.

Sulfur-containing substances in sewers: Transformation, transportation, and remediation

Sulfur-containing substances in sewers frequently incur unpleasant odors, corrosion-related economic loss, and potential human health concerns. These observations are principally attributed to microbial reactions, particularly the involvement of sulfate-reducing bacteria (SRB) in sulfur reduction process. As a multivalent element, sulfur engages in complex bioreactions in both aerobic and anaerobic environments. Organic sulfides are also present in sewage, and these compounds possess the potential to undergo transformation and volatilization. In this paper, a comprehensive review was conducted on the present status regarding sulfur transformation, transportation, and remediation in sewers, including both inorganic and organic sulfur components. The review extensively addressed reactions occurring in the liquid and gas phase, as well as examined detection methods for various types of sulfur compounds and factors affecting sulfur transformation. Current remediation measures based on corresponding mechanisms were presented. Additionally, the impacts of measures implemented in sewers on the subsequent wastewater treatment plants were also discussed, aiming to attain better management of the entire wastewater system. Finally, challenges and prospects related to the issue of sulfur-containing substances in sewers were proposed to facilitate improved management and development of the urban water system.

Transformation of sulfur in the sediment-water system of the sewage pipeline under different hydraulic retention time

Transformation of sulfur in sewage pipeline was affected by water flow, and the transformation laws at different locations in the sediment-water system were different. This work studied the changes of sulfur in sediments, sewage, and upper space of the sewage pipeline, analyzed the differences in microbial community under different hydraulic retention time (HRT) and depth, and focused on the transformation law of sulfur. Results showed that sulfate and sulfide concentrations in sewage were higher than those in sediments under anaerobic conditions. Moreover, sulfate and sulfide concentrations in sediments decreased with depth. When HRT decreased from 3 h to 1 h, H2S concentration increased evidently, whereas sulfate concentration decreased in the sewage and sediment, and sulfide concentration increased in sewage and surface sediment. Those differences were related to the relative abundances of the two microbial communities. The relative abundances of sulfate-reducing bacteria (SRB), such as Desulfobacter, Desulfovibrio, and Desulfomicrobium, were higher in surface sediment. Correspondingly, those of Thiobacillus, Bacillus, and other sulfur-oxidizing bacteria (SOB) and Smithella were higher in deep sediment. The decrease of HRT might worsen the mass transfer effect of dissolved oxygen, thereby increasing the production rate of sulfur and causing H2S to easily escape from sewage.

A critical review of chemical uses in urban sewer systems

Chemical dosing is the most used strategy for sulfide and methane abatement in urban sewer systems. Although conventional physicochemical methods, such as sulfide oxidation (e.g., oxygen/nitrate), precipitation (e.g., iron salts), and pH elevation (e.g., magnesium hydroxide/sodium hydroxide) have been used since the last century, the high chemical cost, large environmental footprint, and side-effects on downstream treatment processes demand a sustainable and cost-effective alternative to these approaches. In this paper, we aimed to review the currently used chemicals and significant progress made in sustainable sulfide and methane abatement technology, including 1) the use of bio-inhibitors, 2) in situ chemical production, and 3) an effective dosing strategy. To enhance the cost-effectiveness of chemical applications in urban sewer systems, two research directions have emerged: 1) online control and optimization of chemical dosing strategies and 2) integrated use of chemicals in urban sewer and wastewater treatment systems. The integration of these approaches offers considerable system-wide benefits; however, further development and comprehensive studies are required.

In-situ advanced oxidation of sediment iron for sulfide control in sewers

Sulfide control is a significant problem in urban sewer management. Although in-sewer dosing of chemicals has been widely applied, it is prone to high chemical consumption and cost. A new approach is proposed in this study for effective sulfide control in sewers. It involves advanced oxidation of ferrous sulfide (FeS) in sewer sediment, to produce hydroxyl radical (·OH) in-situ, leading to simultaneous sulfide oxidation and reduction of microbial sulfate-reducing activity. Long-term operation of three laboratory sewer sediment reactors was used to test the effectiveness of sulfide control. The experimental reactor with the proposed in-situ advanced FeS oxidation substantially reduced sulfide concentration to 3.1 ± 1.8 mg S/L. This compares to 9.2 ± 2.7 mg S/L in a control reactor with sole oxygen supply, and 14.1 ± 4.2 mg S/L in the other control reactor without either iron or oxygen. Mechanistic investigations illustrated the critical role of ·OH, produced from the oxidation of sediment iron, in regulating microbial communities and the chemical sulfide oxidation reaction. Together these results demonstrate that incorporating the advanced FeS oxidation process in sewer sediment enable superior performance of sulfide control at a much lower iron dosage, thereby largely saving chemical use.

Enhancing the Biological Oxidation of H2S in a Sewer Pipe with Highly Conductive Concrete and Electricity-Producing Bacteria

Hydrogen sulfide (H2S) generated in sewer systems is problematic to public health and the environment, owing to its corrosive consequences, odor concerns, and poison control issues. In a previous work, conductive concrete, based on amorphous carbon with a mechanism that operates as a microbial fuel cell was investigated. The objective of the present study is to develop additional materials for highly conductive concrete, to mitigate the concentration of H2S in sewer pipes. Adsorption experiments were conducted to elucidate the role of the H2S reduction. Additionally, electricity-producing bacteria (EPB), isolated from a municipal wastewater treatment plant, were inoculated to improve the H2S reduction. The experimental results showed that inoculation with EPB could decrease the concentration of H2S, indicating that H2S was biologically oxidized by EPB. Several types of new materials containing acetylene black, or magnetite were discovered for use as conductive concrete, and their abilities to enhance the biological oxidation of H2S were evaluated. These conductive concretes were more effective than the commercial conductive concrete, based on amorphous carbon, in decreasing the H2S concentration in sewer pipes.

Metal nanoparticles increased the lag period and shaped the microbial community in slurry-electrode microbial electrosynthesis

Concerns about energy crisis and CO₂ emission have motivated the development of microbial electrosynthesis (MES); recent studies have showed the potential of novel slurry-electrode MES. In this study, the effect of nonprecious metal nanoparticles (NPs) on the performance of slurry-electrode MES was systematically evaluated in terms of chemical production, physicochemical properties, electrochemical characterization, and microbial community. Ni and Cu NPs increased the lag period from 6 to 15 days for acetate production, while Mo NPs showed no apparent effect. However, these metal NPs slightly affected the final total acetate production (ca. 10 g L^-1), Faradic efficiency (ca. 50%), net water flux across the anion exchange membrane (ca. 6 mL d^-1), or electrochemical characterization of catholyte. BRH-c20a was enriched as the dominated microbe (>48%), and its relative abundance was largely affected by the addition of metal NPs. This study demonstrates that metal NPs affect the performance of biocathodes, mainly by shaping the microbial community.