Air-water interfacial adsorption of C4-C10 perfluorocarboxylic acids during transport in unsaturated porous media

Fate, distribution, and transport dynamics of Per- and Polyfluoroalkyl Substances (PFASs) in the environment

Per- and Polyfluoroalkyl Substances (PFASs) are persistent organic pollutants with significant environmental and health impacts due to their widespread occurrence, bioaccumulation potential, and resistance to degradation. This paper comprehensively reviews current knowledge of PFAS fate and transport mechanisms by correlating PFAS leaching, retention, and movement to their physicochemical properties and environmental factors based on observing PFAS fate and transport in unsaturated zones, surface water, sediments, plants, and atmosphere. The complex and unique physiochemical properties of PFASs, such as their carbon-fluorine bonds and amphiphilic nature, determine their environmental behavior and persistence. Recent studies emphasize that concentration-dependent affinity coefficients predict the transport of diverse PFAS mixtures by considering the impact of the Air-Water Interface (AWI). These studies highlight the complex interactions that influence PFAS behavior in environmental systems and the need for refined modeling techniques to account for transport dynamics. Competitive adsorption at the AWI, influenced by PFAS physicochemical properties and environmental factors, is crucial. PFAS chain length profoundly affects PFAS volatility and mobility, i.e., longer chains show higher solid matrix adsorption, while shorter chains exhibit greater atmospheric deposition potential. Solution chemistry, encompassing pH and ionic strength, variably alters PFAS sorption behaviors. Mathematical models, such as the Leverett Thermodynamic Model (LTM) and Surface Roughness Multipliers (SRM), effectively predict PFAS retention, offering enhanced accuracy for surface-active solutes through empirical adjustments. Co-contaminants' presence influences the transport behavior of PFASs in the environment. Microbial activity alters PFAS retention, while microplastics, especially polyamide, contribute to their adsorption. These complex interactions govern PFAS fate and transport in the environment. The paper identifies critical gaps in current understanding, including the fate of PFASs, analytical challenges, ecological risk assessment methods, and the influence of episodic events on PFAS transport dynamics. This paper also investigates the research gap in refining current models and experimental approaches to predict PFAS transport accurately and enhance risk mitigation efforts. Addressing these gaps is crucial for advancing remediation strategies and regulatory frameworks to mitigate PFAS contamination effectively.

Perfluorooctanoic acid transport and fate difference driven by iron-sulfide minerals transformation interacting with different types of groundwater

Perfluorooctanoic acid (PFOA) is an emerging persistent organic pollutant that threatens human health and ecosystems. However, the intricate mechanism of the change in PFOA transport behavior that interacts with FexSy minerals under groundwater-type differences is not clear. To address this knowledge gap, multi-scale experiments and multi-process reaction models were constructed to investigate the underlying mechanisms. The results showed that different groundwater (NO3-, Cl--Na+, SO42-, and HCO3- types) had significant effects on PFOA transport. NO3-, Cl--Na+, SO42-, and HCO3- decreased the retardation effect of PFOA in the FexSy media. Compared to other groundwater types, the adsorption sites of FexSy were the least occupied in the NO3- groundwater. This observation was supported by the least inhabition of λ in FexSy-NO3- interaction system, which demonstrated that more PFOA was in a high reaction zone and electrostatic repulsion was weakest. The surface tension of different ion types in groundwater provided evidence explaining the lowest inhibition in the FexSy-NO3- system. The 2D spatiotemporal evolution results showed that in FexSy with NO3- system, the pollutant flux (6.00 ×10-5 mg·(m2·s)-1) was minimal. The pollutant flux in the SO42- groundwater system was 9.95-fold that in FexSy with the NO3- groundwater. These findings provide theoretical support for understanding the transport and fate of PFOA in FexSy transformations that interact with different types of groundwater.

PFAS transport under lower water-saturation conditions characterized with instrumented-column systems

The transport of PFOS and PFOA in well-characterized sand was investigated for relatively low water saturations. An instrumented column was used for some experiments to provide real-time in-situ monitoring of water saturation and matric potential. The results showed that water saturations and matric potentials varied minimally during the experiments. Flow rates were monitored continuously and were essentially constant. These results demonstrate that surfactant-induced flow and other nonideal hydraulic processes did not materially impact PFAS transport for the experiment conditions. Air-water interfacial adsorption was demonstrated to provide the great majority of retention for PFOS and PFOA. Retention was significantly greater at the lower water saturations (0.35-0.45) compared to the higher saturations (∼0.66) for both PFAS, due to the larger extant air-water interfacial areas. Retardation factors were 5 and 3-times greater at the lower water saturations for PFOS and PFOA, respectively. Early breakthrough was observed for the PFAS but not for the non-reactive tracers at the lower water saturations, indicating the possibility that air-water interfacial adsorption was rate-limited to some degree. Independently determined retention parameters were used to predict retardation factors for PFOS and PFOA, which were similar to the measured values in all cases. The consistency between the predicted and measured values indicates that PFAS retention was accurately represented. In addition, air-water interfacial adsorption coefficients measured from the transport experiments were consistent with independently measured equilibrium-based values. Based on these results, it appears that the air-water interfacial adsorption processes mediating the magnitude of PFOS and PFOA retention under lower water-saturation conditions are consistent with those for higher water saturations. This provides some confidence that our understanding of PFAS retention obtained from work conducted at higher water saturations is applicable to lower water saturations.

Preferential Partitioning of Per- and Polyfluoroalkyl Substances (PFAS) and Dissolved Organic Matter in Freshwater Surface Microlayer and Natural Foam

Per- and polyfluoroalkyl substances (PFAS) are surfactants that can accumulate in the surface microlayer (SML) and in natural foams, with potential elevated exposure for organisms at the water surface. However, the impact of water chemistry on PFAS accumulation in these matrices in freshwater systems is unknown. We quantified 36 PFAS in water, the SML, and natural foams from 43 rivers and lakes in Wisconsin, USA, alongside measurements of pH, cations, and dissolved organic carbon (DOC). PFAS partition to foams with concentration ranging 2300-328,200 ng/L in waters with 6-139 ng/L PFAS (sum of 36 analytes), corresponding to sodium-normalized enrichment factors ranging <50 to >7000. Similar enrichment is observed for DOC (∼70). PFAS partitioning to foams increases with increasing chain length and is positively correlated with [DOC]. Modest SML enrichment is observed for PFOS (1.4) and FOSA (2.4), while negligible enrichment is observed for other PFAS and DOC due to low specific surface area and turbulent conditions that inhibit surfactant accumulation. However, DOC composition in the SML is distinct from bulk water, as assessed using high-resolution mass spectrometry. This study demonstrates that natural foams in unimpacted and impacted waters can have elevated PFAS concentrations, whereas SML accumulation in surface waters is limited.

High-Resolution Depth-Discrete Analysis of PFAS Distribution and Leaching for a Vadose-Zone Source at an AFFF-Impacted Site

The long-term leaching of polyfluoroalkyl substances (PFAS) within the vadose zone of an AFFF application site for which the depth to groundwater is approximately 100 m was investigated by characterizing the vertical distribution of PFAS in a high spatial resolution. The great majority (99%) of PFAS mass resides in the upper 3 m of the vadose zone. The depths to which each PFAS migrated, quantified by moment analysis, is an inverse function of molar volume, demonstrating chromatographic separation. The PFAS were operationally categorized into three chain-length groups based on the three general patterns of retention observed. The longest-chain (>∼335 cm3/mol molar volume) PFAS remained within the uppermost section of the core, exhibiting minimal leaching. Conversely, the shortest-chain (<∼220 cm3/mol) PFAS accumulated at the bottom of the interval, which coincides with the onset of a calcic horizon. PFAS with intermediate-chain lengths were distributed along the length of the core, exhibiting differential magnitudes of leaching. The minimal or differential leaching observed for the longest- and intermediate-chain-length PFAS, respectively, demonstrates that retention processes significantly impacted migration. The accumulation of shorter-chain PFAS at the bottom of the core is hypothesized to result from limited deep infiltration and potential-enhanced retention associated with the calcic horizon.

Revising the EPA Dilution-Attenuation Soil Screening Model for PFAS

Per and polyfluoroalkyl substances (PFAS) have been shown to be ubiquitous in the environment, and one issue of critical concern is the leaching of PFAS from soil to groundwater. The risk posed by contaminants present in soil is often assessed in terms of the anticipated impact to groundwater through the determination of soil screening levels (SSLs). The U.S. Environmental Protection Agency (EPA) established a soil screening model for determining SSLs. However, the model does not consider the unique retention properties of PFAS and, consequently, the SSLs established with the model may not represent the actual levels that are protective of groundwater quality. The objective of this work is to revise the standard EPA SSL model to reflect the unique properties and associated retention behavior of PFAS. Specifically, the distribution parameter used to convert soil porewater concentrations to soil concentrations is revised to account for adsorption at the air-water interface. Example calculations conducted for PFOS and PFOA illustrate the contrasting SSLs obtained with the revised and standard models. A comparison of distribution parameters calculated for a series of PFAS of different chain length shows that the significance of air-water interfacial adsorption can vary greatly as a function of the specific PFAS. Therefore, the difference between SSLs calculated with the revised versus standard models will vary as a function of the specific PFAS, with greater differences typically observed for longer-chain PFAS. It is anticipated that this revised model will be useful for developing improved SSLs that can be used to enhance site investigations and management for PFAS-impacted sites.

Iron (hydr)oxide dynamic transformation-induced perfluorooctanoic acid transport and attenuation effect: Impacts of initial goethite and associated minerals content and groundwater type

Perfluorooctanoic acid (PFOA) has been widely utilized, leading to serious contamination. Iron (hydr)oxide transformation was varied in media. Whereas, dynamic transformation effect was extensively unclear. Here, iron (hydr)oxide dynamic transformation-induced PFOA transport and attenuation was investigated by emphasizing initial goethite (α-FeOOH) and associated minerals content and groundwater type based on the multi-process attenuation model. Results revealed that groundwater type did not affect the PFOA attenuation pathway. However, it controlled the iron (hydr)oxide dynamic transformation differences. PFOA transport behavior (retardation factor R from 2.61 to 1.91) was significantly affected by iron (hydr)oxide dynamic transformation. Iron (hydr)oxide transformation induced the greatest PFOA transport risk (R = 1.91, attenuation rate λ = 0.0001 min-1) in SO42- environment, where complex α-FeOOH, Fe3O4, and β-Fe2O3·H2O transformed to simplex β-FeOOH, leading to instantaneous (Kd) and kinetic (α) two-site sorption fraction change. Furthermore, the associated mineral Fe3O4 of goethite was crucial in PFOA attenuation (λ from 0.0001 to 0.0002 min-1). Fe3O4 released Fe2+ and the oxidation of Fe2+ to Fe3+ provided electrons, facilitating the formation of F-(CF2)7-COO· radicals, which played a key role in the following cycle attenuation process. This study provides a theoretical basis for understanding the interaction mechanism of PFOA and iron (hydr)oxide dynamic transformation under groundwater differences.

Determining air-water interfacial areas for the retention and transport of PFAS and other interfacially active solutes in unsaturated porous media

The objective of this work was to determine the methods that produce the most representative measurements and estimations of air-water interfacial area specifically for the retention and transport of PFAS and other interfacially active solutes in unsaturated porous media. Published data sets of air-water interfacial areas obtained with multiple measurement and prediction methods were compared for paired sets of porous media comprising similar median grain diameters, but one with solid-surface roughness (sand) and one without roughness (glass beads). All interfacial areas produced with the multiple diverse methods were coincident for the glass beads, providing validation of the aqueous interfacial tracer-test methods. The results of this and other benchmarking analyses demonstrated that the differences in interfacial areas measured for sands and soil by different methods are not due to errors or artifacts in the methods but rather the result of method-dependent differential contributions of solid-surface roughness. The contributions of roughness to interfacial areas measured by interfacial tracer-test methods were quantified and shown to be consistent with prior theoretical and experiment-based investigations of air-water interface configurations on rough solid surfaces. Three new methods for estimating air-water interfacial areas were developed, one based on the scaling of thermodynamic-determined values and the other two comprising empirical correlations incorporating grain diameter or NBET solid surface area. All three were developed based on measured aqueous interfacial tracer-test data. The three new and three existing estimation methods was tested using independent data sets of PFAS retention and transport. The results showed that the method based on treating air-water interfaces as smooth surfaces as well as the standard thermodynamic method produced inaccurate air-water interfacial areas that failed to reproduce the multiple measured PFAS retention and transport data sets. In contrast, the new estimation methods produced interfacial areas that accurately represented air-water interfacial adsorption of PFAS and associated retention and transport. The measurement and estimation of air-water interfacial areas for field-scale applications is discussed in light of these results.

Transport behavior difference and transport model of long- and short-chain per- and polyfluoroalkyl substances in underground environmental media: A review

Perfluoroalkyl carboxylic acids (PFCAs) and perfluoroalkyl sulfonates (PFSAs), which are the most commonly regulated and most widely concerned per- and polyfluoroalkyl substances (PFAS) have received increasing attention on a global scale due to their amphiphilicity, stability, and long-range transport. Thus, understanding the typical PFAS transport behavior and using models to predict the evolution of PFAS contamination plumes is important for evaluating the potential risks. In this study, the effects of organic matter (OM), minerals, water saturation, and solution chemistry on the transport and retention of PFAS were investigated, and the interaction mechanism between long-chain/short-chain PFAS and the surrounding environment was analyzed. The results revealed that high content of OM/minerals, low saturation, low pH, and divalent cation had a great retardation effect on long-chain PFAS transport. The retention caused by hydrophobic interaction was the prominent mechanism for long-chain PFAS, whereas, the retention caused by electrostatic interaction was more relevant for short-chain PFAS. Additional adsorption at the air-water and nonaqueous-phase liquids (NAPL)-water interface was another potential interaction for retarding PFAS transport in the unsaturated media, which preferred to retard long-chain PFAS. Furthermore, the developing models for describing PFAS transport were investigated and summarized in detail, including the convection-dispersion equation, two-site model (TSM), continuous-distribution multi-rate model, modified-TSM, multi-process mass-transfer (MPMT) model, MPMT-1D model, MPMT-3D model, tempered one-sided stable density transport model, and a comprehensive compartment model. The research revealed PFAS transport mechanisms and provided the model tools, which supported the theoretical basis for the practical prediction of the evolution of PFAS contamination plumes.

Modified linear solvation energy relationships for adsorption of perfluorocarboxylic acids by polystyrene microplastics

Microplastics (MPs) could act as vectors of organic pollutants such as per- and polyfluoroalkyl substances (PFAS). Therefore, understanding adsorptive interactions are essential steps towards unraveling the fate of PFAS in the natural waters where MPs are ubiquitous. Linear solvation energy relationships (LSER)-based predictive models are utilitarian tools to delineate the complexity of adsorption interactions. However, commonly studied PFAS are in their ionic forms at environmentally relevant conditions and LSER modeling parameters do not account for their ionization. This study aims to develop the first LSER model for the adsorption of PFAS by MPs using a subset of ionizable perfluoroalkyl carboxylic acids (PFCA). The adsorption of twelve PFCAs by polystyrene (PS) MPs was used for model training. The study provided mechanistic insights regarding the impacts of PFCA chain length, PS oxidation state, and water chemistry. Results show that the polarizability and hydrophobicity of anionic PFCA are the most significant contributors to their adsorption by MPs. In contrast, van der Waals interactions between PFCA and water significantly decrease PFCA binding affinity. Overall, LSER is demonstrated as a promising approach for predicting the adsorption of ionizable PFAS by MPs after the correction of Abraham's solute descriptors to account for their ionization.