Highly efficient catalytic ozonation for ammonium in water upon γ-Al2O3@Fe/Mg with acidic-basic sites and oxygen vacancies

Extremely efficient catalytic ozonation of ammonia N to N2 using Co/Mg(OH)2 as catalysts

The development of highly efficient and selective ozonation catalysts is crucial for enhancing the treatment of nitrogen-containing wastewater. In this study, a Co/Mg(OH)2 nano-hexagonal sheets ozonation catalyst was prepared by one-pot hydrothermal method, and the structural characteristics of this catalyst were comprehensively analyzed. The OSur/O ratio of this catalyst was 41.06 %. Under the optimal conditions (22 ℃, initial pH of 9.0, ozone dosage of 1.2 mg/L, catalyst dosage of 1.0 g/L, initial NH3-N concentration of 10.00 mg/L), NH3-N and total nitrogen (TN) removal efficiencies of 90.26 % and 63.44 % were respectively obtained, and the removal process exhibited pseudo-first-order kinetics. Moreover, at 4 ℃, the NH3-N and TN removal efficiencies reached 95.49 ± 1.14 % and 65.61 ± 1.13 %. In a co-degradation process for the removal of both N and C, the ammonia and most organic compounds competed for active substances, but both pollutants were effectively removed. Hydroxyl radicals (•OH) were the main active substance involved in NH3 removal. However, the massive loss of Mg2+ experienced after three cycles reduced the NH3-N and TN removal efficiencies to 31.83 % and 6.55 %, respectively. Finally, the electron transfer generated by the variable-valence Co ion was determined to promote the selectivity of the reaction toward gaseous N products. These findings offer promising avenues for the development of more energy-efficient and effective nitrogen removal processes.

Detection and removal technologies for ammonium and antibiotics in agricultural wastewater: Recent advances and prospective

With the extensive development of industrial livestock and poultry production, a considerable part of agricultural wastewater containing tremendous ammonium and antibiotics have been indiscriminately released into the aquatic systems, causing serious harms to ecosystem and human health. In this review, ammonium detection technologies, including spectroscopy and fluorescence methods, and sensors were systematically summarized. Antibiotics analysis methodologies were critically reviewed, including chromatographic methods coupled with mass spectrometry, electrochemical sensors, fluorescence sensors, and biosensors. Current progress in remediation methods for ammonium removal were discussed and analyzed, including chemical precipitation, breakpoint chlorination, air stripping, reverse osmosis, adsorption, advanced oxidation processes (AOPs), and biological methods. Antibiotics removal approaches were comprehensively reviewed, including physical, AOPs, and biological processes. Furthermore, the simultaneous removal strategies for ammonium and antibiotics were reviewed and discussed, including physical adsorption processes, AOPs, biological processes. Finally, research gaps and the future perspectives were discussed. Through conducting comprehensive review, future research priorities include: (1) to improve the stabilities and adaptabilities of detection and analysis techniques for ammonium and antibiotics, (2) to develop innovative, efficient, and low cost approaches for simultaneous removal of ammonium and antibiotics, and (3) to explore the underlying mechanisms that governs the simultaneous removal of ammonium and antibiotics. This review could facilitate the evolution of innovative and efficient technologies for ammonium and antibiotics treatment in agricultural wastewater.

A comprehensive review on metal based active sites and their interaction with O3 during heterogeneous catalytic ozonation process: Types, regulation and authentication

Heterogeneous catalytic ozonation (HCO) was a promising water purification technology. Designing novel metal-based catalysts and exploring their structural-activity relationship continued to be a hot topic in HCO. Herein, we reviewed the recent development of metal-based catalysts (including monometallic and polymetallic catalysts) in HCO. Regulation of metal based active sites (surface hydroxyl groups, Lewis acid sites, metal redox cycle and surface defect) and their key roles in activating O₃ were explored. Advantage and disadvantage of conventional characterization techniques on monitoring metal active sites were claimed. In situ electrochemical characterization and DFT simulation were recommended as supplement to reveal the metal active species. Though the ambiguous interfacial behaviors of O₃ at these active sites, the existence of interfacial electron migration was beyond doubt. The reported metal-based catalysts mainly served as electron donator for O₃, which resulted in the accumulation of oxidized metal and reduced their activity. Design of polymetallic catalysts could accelerate the interfacial electron migration, but they still faced with the dilemma of sluggish Me^(n+m)+/Meⁿ⁺ redox cycle. Alternative strategies like coupling active metal species with mesoporous silicon materials, regulating surface hydrophobic/hydrophilic properties, polaring surface electron distribution, coupling HCO process with photocatalysis and H₂O₂ were proposed for future research.

Effect of Basic Promoters on Porous Supported Alumina Catalysts for Acetins Production

A facile strategy for the design of porous supports was obtained by modifying the sol-gel method followed by the wet impregnation technique. In this respect, herein, the acidity of the γ-Al2O3 phase was modulated by adding basic MgO, La2O3 or ZnO promoters to form binary supported catalysts. The Ni and Co dispersion on the supports associated with their tunable acidity and morphologies resulted in highly porous supported alumina-based catalysts. The physicochemical properties of the solids were comprehensively investigated by XRD, textural properties, Raman and FTIR spectroscopy, SEM-EDS, TEM, EPR and XPS analyses. The catalytic performances in the esterification of glycerol in the presence of acetic acid (EG) for the acetins production were evaluated. The highly dispersed NiO and Co3O4 active species on binary porous supports produced synergistic effects appearing to be the reason for the activity of the solids in the EG reaction. Under the optimized reaction conditions, NiCo/MgO-Al2O3 was found to be a robust solid with superior catalytic performance and improved stability in four reaction cycles with 65.0% of glycerol conversion with an exclusive selectivity of 53% for triacetin. The presence of Co2+/Co3+ and Ni2+ strongly interacting with the spinel γ-Al2O3 and MgAl2O4 phases, the latter having a large number of lattice oxygen species, was considered another active component besides those of Ni and Co in the esterification of glycerol.