Fenton micro-reactor on a bubble: A novel microbubble-triggered simultaneous capture and catalytic oxidation strategy for recalcitrant organic pollutant removal

Micro and nanobubbles-assisted advanced oxidation processes for water decontamination: The importance of interface reactions

Micro and nanobubbles (MNBs), as an efficient and convenient method, have been widely used in water treatment. Composed of gas and water, MNBs avoid directly introducing potential secondary pollutants. Notably, MNBs exhibit significant advantages through interface reactions in assisting AOPs. They overcome barriers like low mass transfer coefficients and limited reactive sites, and shorten the distance between pollutants and oxidants, achieving higher pollutant removal efficiency. However, there is a lack of systematic summary and in-depth discussion on the fundamental mechanisms of MNBs-assisted AOPs. In this critical review, the characteristics of MNBs related to water treatment are outlined first. Subsequently, the recent applications, performance, and mechanisms of MNBs-assisted AOPs including ozone, plasma, photocatalytic, and Fenton oxidation are overviewed. We conclude that MNBs can improve pollutant removal mainly by enhancing the utilization of reactive oxygen species (ROS) generated by AOPs due to the effective interface reactions. Furthermore, we calculated the electrical energy per order of reaction (EE/O) parameter of different MNBs-assisted AOPs, suggesting that MNBs can reduce the total energy consumption in most of the tested cases. Finally, future research needs/opportunities are proposed. The fundamental insights in this review are anticipated to further facilitate an in-depth understanding of the mechanisms of MNBs-assisted AOPs and supply critical guidance on developing MNBs-based technologies for water treatment.

Synthesis of H2O2 to Self-Catalyzed Generation of •OH over ZnO/CuI/Cu Foam Electrode for the Self-Fenton Cleaning of Wastewater

A novel ZnO/CuI/Cu foam electrode was constructed, which demonstrated excellent photoelectrocatalytic activity for the self-Fenton degradation of tetracycline in water. The H2O2 yield was 405.0 μmol L-1 over ZnO/CuI/Cu foam (CIZ-3) under light irradiation (100 mW cm-2) for 5 h at -1.23 V (vs NHE), which was 1.7 times higher than that of ZnO/Cu foam and 1.6 times higher than that of CuI/Cu foam, respectively. The 99.0% of tetracycline was degraded by CIZ-3 due to its efficient yield of H2O2 to self-catalyzed generation of •OH. The results of the open-circuit potential between CuI and ZnO displayed that the electrons from the conduction band of CuI flowed to ZnO and the holes from the valence band of ZnO migrated to CuI. As a result, the photogenerated electron-hole pairs of ZnO/CuI were efficiently separated, which greatly promoted the photoelectrocatalytic activity of ZnO/CuI/foam. The toxicity of the aqueous tetracycline solution was significantly reduced by observing the growth of Escherichia coli in the treated wastewater.

Microstructured gas-liquid-(solid) interfaces: A platform for sustainable synthesis of commodity chemicals

Gas-liquid-solid catalytic reactions are widespread in nature and man-made technologies. Recently, the exceptional reactivity observed on (electro)sprayed microdroplets, in comparison to bulk gas-liquid systems, has attracted the attention of researchers. In this perspective, we compile possible strategies to engineer catalytically active gas-liquid-(solid) interfaces based on membrane contactors, microdroplets, micromarbles, microbubbles, and microfoams to produce commodity chemicals such as hydrogen peroxide, ammonia, and formic acid. In particular, particle-stabilized microfoams, with superior upscaling capacity, emerge as a promising and versatile platform to conceive high-performing (catalytic) gas-liquid-(solid) nanoreactors. Gas-liquid-(solid) nanoreactors could circumvent current limitations of state-of-the-art multiphase reactors (e.g., stirred tanks, trickle beds, and bubble columns) suffering from poor gas solubility and mass transfer resistances and access gas-liquid-(solid) reactors with lower cost and carbon footprint.

Micron-confined microcapturer-triggered Fenton as efficient and environmentally-friendly method for simultaneously capturing bloom-forming cyanobacteria, inhibiting cell-regrowth and degrading microcystins

The frequent outbreak and continuous expansion of harmful cyanobacteria blooms (HCBs) have become important environmental concerns and public health issues globally. In this study, the "micron-confined Fe(II)-modified-microcapturer (FMC)-triggered Fenton" technology was established as advanced process adaptable to the HCB treatment. Results show that 95.7-99.4% of cyanobacteria cells were captured and separated from the HCB water at the optimum doses of Fe(II) and H2O2 within only 30 s. The chain-like cyanobacteria of A. flos-aquae were easier to be collected by FMCs compared with the unicellular M. aeruginosa. It was confirmed by scanning electron microscopic observation and fluorescence staining flow cytometry measurement that the FMC-carrying Fe(II) played the roles of both cell-gripper and Fenton catalyst. During the one-step process, the FMC-triggered Fenton effectively inhibited the cyanobacteria regrowth via inactivating the cells, and meanwhile, the microcystins of LR and RR were removed. The analyses by continuous flow chemiluminescence and X-ray photoelectron spectroscopy denote that FMCs performed efficiently in capture and Fe(II)-catalytic oxidation through increasing mass transfer, exposing sufficient active reactive oxygen species active-sites on the FMC surface and accelerating electron transfer. The micron-field-confined cascade processes retained the robust performance of Fenton against the high pH of bulk HCB water. This novel interface-dependent Fenton method is a promising tool for HCB treatment owing to its great efficiency, versatility, rapidness and eco-environmental friendliness.

Microbiome recognition of virulence-factor-governed interfacial mechanisms in antibiotic resistance and pathogenicity removal by functionalized microbubbles

The frequent occurrence of epidemics around the world gives rise to increasing concerns of the pollution of pathogens and antibiotic resistant bacteria in water. This study investigated the impacts of virulence factors (VFs) on the removal of antibiotic resistant and pathogenic bacteria from municipal wastewater by ozone-free or ozone-encapsulated Fe(III)-coagulant-modified colloidal microbubbles (O3_free-CCMBs or O3-CCMBs). The highly interface-dependent process was initiated with cell-capture on the microbubble surface where the as-collected cells could be further inactivated with the bubble-released ozone and oxidative species if O3-CCMBs were used. The microbiome sequencing analyses denote that the O3_free-CCMB performance of antibiotic resistant and pathogenic bacteria removal was dependent on the virulence phenotypes related to cell-surface properties or structures. The adhesion-related VFs facilitated the effective attachment between cells and the coagulant-modified bubble-surface, which further enhanced cell inactivation by bubble-released ozone. On the contrary, the motility-related VFs might help cells to escape from the bubble capture by locomotion; however, this could be overcome by O3-CCMB-induced oxidative demolition of the movement structures. Besides, the microbubble performance was also impacted with the cell-membrane structure related to antibiotic resistance (i.e., efflux pumps) and the dissolved organic matter through promoting the surface-capture and decreasing the oxidation efficacy. The ozone-encapsulated microbubbles with surface functionalization are robust and promising tools in hampering antibiotic resistance and pathogenicity dissemination from wastewater to surface water environment; and awareness should be raised for the influence of virulence signatures on its performance.

Recent advances in carbon-based nanomaterials for the treatment of toxic inorganic pollutants in wastewater

Wastewater contains inorganic pollutants, generated by industrial and domestic sources, such as heavy metals, antibiotics, and chemical pesticides, and these pollutants cause many environmental problems.